Resumen del contenido incluido en la página 1
User Manual
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS 1. Before You Begin................................................................................3 What Is Included ........................................................................................... 3 Unpacking Instructions .................................................................................. 3 Claims ................................................................................................................... 3 Text Conventions .....
Resumen del contenido incluido en la página 3
1. BEFORE YOU BEGIN · Intimidator™ Spot LED 250 · Power Cord What Is · Hanging Bracket with Mounting · Warranty Card Included Hardware · Quick Reference Guide Unpacking Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition. Instructions If the box or the contents (the product and included accessories) appear damaged from Claims shipping, or show signs of mishandling, notify the carrie
Resumen del contenido incluido en la página 4
Use on Dimmer Auto Programs x P Product at a Outdoor Use Auto-ranging Power Supply x P Glance Sound-Activated Replaceable Fuse P P DMX User-Serviceable x P Master/Slave P Please read the following Safety Notes carefully before working with the product. The Safety Notes Notes include important safety information about installation, usage, and maintenance. · This product is not intended for permanent installation. · Always connect the product to a grounded circuit
Resumen del contenido incluido en la página 5
2. INTRODUCTION Product Overview Cooling Fan Control Panel and Button Menu Power In DMX Out Power Out DMX In Fuse Holder Intimidator™ Spot LED 250 User Manual Rev. 11 Page 5 of 20
Resumen del contenido incluido en la página 6
Product Dimensions Page 6 of 20 Intimidator™ Spot LED 250 User Manual Rev. 11
Resumen del contenido incluido en la página 7
3. SETUP The Intimidator™ Spot LED 250 has an auto-ranging power supply and it can work with AC Power an input voltage range of 100~240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions. Always connec
Resumen del contenido incluido en la página 8
Before mounting the product, read and follow the Safety Notes. Mounting The Intimidator™ Spot LED 250 may be mounted in any position; however, make sure Orientation adequate ventilation is provided around the product. · Before deciding on a location, always make sure there is easy access to the product Rigging for maintenance and programming purposes. · Make sure that the structure or surface onto which you are mounting the product can support the product’s weight. See the
Resumen del contenido incluido en la página 9
4. OPERATION To access the control panel functions, use the four buttons located underneath the Control Panel display. Operation Button Function Press to find an operation mode or to back out of the current menu option Press to scroll up the list of options or to find a higher value Press to scroll down the list of options or to find a lower value Press to activate a menu option or a selected value Mode Programming Steps Description Men
Resumen del contenido incluido en la página 10
Set the product in DMX mode to control with a DMX controller. Configuration 1. Connect the product to a suitable power outlet. (DMX) 2. Turn the product on. 3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product. When selecting a starting DMX address, always consider the number of DMX channels Starting Address the selected DMX mode uses. If you choose a starting address that is too high, you could restrict the access to some o
Resumen del contenido incluido en la página 11
DMX Channel Assignments and Values Channel Function Value Setting 13-CH 1 Pan 000 ó 255 0–540° 2 Fine Pan 000 ó 255 Fine control of panning 3 Tilt 000 ó 255 0–270° 4 Fine Tilt 000 ó 255 Fine control of tilting 5 Speed 000 ó 255 Pan/Tilt speed (fast to slow) 000 ó 006 White 007 ó 013 Yellow 014 ó 020 Pink 021 ó 027 Green 028 ó 034 Red 035 ó 041 Light Blue 042 ó 048 Kelly Green 049 ó 055 Orange 056 ó 064 Dark Blue 065 ó 071 White + Yellow 6 Color Wheel 072 ó 078 Yellow
Resumen del contenido incluido en la página 12
DMX Channel Assignments and Values (cont.) Channel Function Value Setting 13-CH (cont.) 000 ó 119 Rotation effect with increasing speed 8 Gobo Rotation 120 ó 231 Reverse rotation effect with increasing speed 232 ó 255 Gobo bounce 000 ó 015 Open 9 Prism 016 ó 255 Prism on 10 Dimmer 000 ó 255 0–100% 000 ó 003 Closed 004 ó 007 Open 11 Shutter 008 ó 215 Strobe effect with increasing speed 216 ó 255 Open 000 ó 007 No function 008 ó 027 Blackout while pan/tilt moving 028 ó 0
Resumen del contenido incluido en la página 13
DMX Channel Assignments and Values (cont.) Channel Function Value Setting 8-CH 1 Pan 000 ó 255 0–540° 2 Tilt 000 ó 255 0–270° 000 ó 006 White 007 ó 013 Yellow 014 ó 020 Pink 021 ó 027 Green 028 ó 034 Red 035 ó 041 Light Blue 042 ó 048 Kelly Green 049 ó 055 Orange 056 ó 064 Dark Blue 065 ó 071 White + Yellow 3 Color Wheel 072 ó 078 Yellow + Pink 079 ó 085 Pink + Green 086 ó 092 Green + Red 093 ó 099 Red + Light Blue 100 ó 106 Light Blue + Kelly Green 107 ó 113 Kelly G
Resumen del contenido incluido en la página 14
Set the product in one of the standalone modes to control without a DMX controller. Configuration 1. Connect the product to a suitable power outlet. (Standalone) 2. Turn the product on. Never connect a product that is operating in any standalone mode (either Static, Automatic, or Sound) to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller. To enable the Sound-Act
Resumen del contenido incluido en la página 15
You are able to flip the LED display for easy readability in any mounting situation. Display To select your display angle: Orientation 1. Press repeatedly until diS shows on the display. 2. Press or to select normal display mode (diS) or inverse display mode (r diS). 3. Press . The Master/Slave mode allows a single Intimidator™ Spot LED 250 unit (the “master”) to Master/Slave units (the “slaves”) control the actions of one or more Intimidator™
Resumen del contenido incluido en la página 16
The Intimidator™ Spot LED 250 contains a password-protected mode which allows you Password to calibrate and troubleshoot any small issues you may have during normal operation. Channel In order to access this mode, do the following: 1. Press and hold for at least 10 seconds. 2. Use the and buttons to enter the password: 2323. 3. Press . In this mode you have several options for adjustment. Parameter Programming Steps Description Pan Adjust
Resumen del contenido incluido en la página 17
To change the gobos in the Intimidator™ Spot LED 250, you do not need to remove the Changing gobo wheel. Simply: Gobos 1. Turn off and disconnect product from power. 2. Place the product on a flat, level surface with the front facing up. 3. Open the gobo-access plate by pushing it in the direction of the arrow. 4. Rotate the gobo wheel until the gobo that needs replacing is accessible. 5. Separate the gobo holder assembly away from the gobo wheel by pushing it forward and up.
Resumen del contenido incluido en la página 18
5. TECHNICAL INFORMATION Dust build-up reduces light output performance and can cause overheating. This can Product lead to reduction of the light source’s life. To maintain optimum performance and Maintenance minimize wear, you should clean your lighting products at least twice a month. However, be aware that usage and environmental conditions may lead to more frequent cleaning. To clean the product, follow the instructions below: · Unplug the product from power. · Wait un
Resumen del contenido incluido en la página 19
In case you need to return a product or request support, follow the procedure below: · If you live in the U.S., contact CHAUVET® World Headquarters. · If you live in the UK or Ireland, contact CHAUVET® Europe Ltd. · If you live in any other country, DO NOT contact CHAUVET®. Instead, contact your dealer. See the respective website for dealers’ contact details. World Headquarters United Kingdom & Ireland Contact Us CHAUVET® CHAUVET® Europe Ltd. General Information General
Resumen del contenido incluido en la página 20
6. TECHNICAL SPECIFICATIONS Length Width Height Weight Dimensions and Weight 9.3 in (236 mm) 8.1 in (205 mm) 11.3 in (287 mm) 12.6 lbs (5.7 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Power Power Supply Type Range Voltage Selection Switching (internal) 100~240 V, 50/60 Hz Auto-ranging Parameter 120 V, 60 Hz 230 V, 50 Hz Consumption 150 W 157 W Operating 1.3 A 0.7 A Power linking units 6 units 11 units Fuse F 2 A, 250 V F 2 A, 250 V
