Manual de instrucciones de Creek Audio OBH 18

Resumen del contenido incluido en la página 1

SPECIFICATION
Creek OBH 18
GAIN 37dB
Phono Pre-Amplifier
FREQUENCY RESPONSE 20 Hz to 20 kHz +/- 0.25 dB
SIGNAL TO NOISE RATIO -86 dB
TOTAL HARMONIC DISTORTION < 0.03%
RIAA DEVIATION +/- 0.1%
OUTPUT 250 mV
OUTPUT IMPEDANCE < 100 W
INPUT SENSITIVITY/IMPEDANCE 3.5 mV / 47 kW / 220 pF
OVERLOAD MARGIN 22 dB
Operating
MATES WELL WITH MM CARTRIDGES 2.5 mV - 5.5 mV output
Instructions
DIMENSIONS 150 x 100 x 66 mm
POWER SUPPLY VOLTAGE 24V DC 30 mA Thank you for purchasing the OBH 18 phono pre-amplifier.

Resumen del contenido incluido en la página 2

INPUT AND OUTPUT CONNECTION WIRING THE OBH 18 The output from the turntable is normally terminated on two 'Phono' plugs or RCA jacks. The level is dependent on the type of cartridge used, and in the case of moving magnet will normally be around 2 - 5 milli Volts and for moving coil - 200 - 500 micro Volts. Most MM cartridges will be properly matched by using the OBH 18. By plugging the signal leads from your turntable into the OBH 18 input, the signal will be boosted to 'LINE' level at i