Resumen del contenido incluido en la página 1
TM
World-Class Auto Security
concept
50x
Owner's Manual
Resumen del contenido incluido en la página 2
The Concept 50x is covered by one or more of the following Clifford Electronics U.S.A. patents: 4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464; 4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215; 5,157,375; 5,467,070 and other patents pending.
Resumen del contenido incluido en la página 3
Table of Contents Standard Features of the Concept 50x . . . . . . . . . . . . . . . . . . . . . . . 2 Your 4-button/12-channel remote controls . . . . . . . . . . . . . . . . . . . . . 6 How to use your keychain remote control . . . . . . . . . . . . . . . . . . . . . . . 6 What each button/channel does . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Anti-CodeGrabbing (ACG) with Random Code Encrypt
Resumen del contenido incluido en la página 4
Standard Features of the Concept 50x ✔ Lifetime Warranty — For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge (see warranty card for full details). ✔ FACT — False Alarm Control and Test — One of many patented Clifford innovations, FACT absolutely, positively ends recurring false alarms. ✔ A Pair of 4-Button/12-Channel Remote Controls — Fingertip command from a distance. ✔ Anti-CodeGrabbing (ACG) with Random Code Encryption — T
Resumen del contenido incluido en la página 5
Standard Features of the Concept 50x (cont.) ✔ Remotely Adjustable Dual-Zone Proximity Sensor— Two sensor zones provide full protection: If someone is lurking near your car, the system will sound a warning tone. But if a thief actually leans into the passenger compartment, the system will instantly blast the siren. It is impervious to wind and temperature variations that cause ultrasonic sensors to false alarm and you can even adjust sensitivity of each zone via the remote control! ✔ Dual-Mode
Resumen del contenido incluido en la página 6
Standard Features of the Concept 50x (cont.) ✔ Remote Window/Sunroof Closure Capability — On certain vehicles (including several models of Mercedes Benz, Jaguar, Volkswagen and BMW), the system’s integrated timer and an optional relay can be used to automatically close the power windows and sunroof every time you remotely arm your system. ✔ QuietChirp— Whenever you desire, you may choose to lower the decibel volume of the arm and disarm chirps to a level that is clearly audible but less obtrusi
Resumen del contenido incluido en la página 7
Standard Features of the Concept 50x (cont.) ✔ Patented Smart AutoTesting— Automatically tests all system triggers and sensors every time you remotely arm and warns you if you accidentally arm your Concept 50x system with the hood or trunk open. If there is a genuine trigger or sensor malfunction, the system will specifically identify the problem, thereby eliminating time-consuming and costly trouble-shooting. ✔ Patented Malfunction AutoBypass with Automatic Monitoring — In the unlikely event o
Resumen del contenido incluido en la página 8
Your 4-button/12-channel remote controls The 4-button/12-channel remote controls are ultra-sophisticated miniature radio transmitters powered by a tiny 12-volt battery. Range is up to 30 meters. A weak remote control battery will reduce range. Electrical interference and even sunspots can interrupt the signal from your remote control to the system. If this happens, repeatedly press the remote control button (this works better than holding the button down). The 4-button/12-channel remote control
Resumen del contenido incluido en la página 9
What each button/channel does Your Concept 50x remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel to any function (see pages 16-20). The following chart indicates what each remote control channel number does, and how to transmit each channel number. Factory settings of the 12 remote control channels Transmitting Press the How Press channel Causes the system to: LevelShift many button number: button? times? numb
Resumen del contenido incluido en la página 10
TO SILENTLY Press button 3 (channel 3). Your Concept 50x system will arm or ARM OR DISARM disarm with all the indications noted above except for the chirp THE SYSTEM . . . . . . . acknowledgments. TO REMOTELY Button 2 (channel 2) controls an electronic interlock that lets you TURN ON A TIMED separately command two functions with the same channel: one ACCESSORY . . . . . . when the system is armed and another when disarmed. Pressing button 2 while the alarm is armed will activate the system’s t
Resumen del contenido incluido en la página 11
How to interpret the chirps and indicator light flashes When you use the remote, the system responds with chirps and indicator light flashes: Chirps and flashes Meaning 1 Your system is disarmed 2 Your system is armed Armed but there is a door open or the sensor is malfunctioning 2 and then 4 (see Smart AutoTesting on page 13) Disarmed but there was an intrusion attempt while you were away 3 (see Smart prior intrusion attempt on page 8) 4 Armed but the hood or trunk is ajar (see Smart AutoTestin
Resumen del contenido incluido en la página 12
UltraSecure™ Coded Valet Mode In seconds, thieves can disable all other alarm brands by hotwiring the ignition and flicking an easy to find “hidden” valet switch. Your system has safeguards that absolutely ensure a thief cannot enable the valet mode as a way of “turning off” your system. How? To enable valet mode, the driver must first enter a secret valet code on the PlainView switch. Your code will be a 1-to-3-digit number of your choosing. Each digit can be any number from 1 to 9, (i.e. the c
Resumen del contenido incluido en la página 13
To exit valet mode 1. Turn the ignition switch to its “ON” position or start the engine. 2. Flick the switch back to its center position. The LED will turn off to confirm that the system is now in its normal operating mode. Setting your own secret valet code Since all Concept Series systems have the same factory-set code, it is highly advisable that you set your own valet code. You may choose any 1-, 2-, or 3-digit code that does not have any zeros. You can also change your valet code whenever
Resumen del contenido incluido en la página 14
Remote controlled valet mode entry and exit You can even enable or exit valet mode with your remote control simply by transmitting channel 9 (LevelShift twice, then button 1). In addition to the above indications, two parking light flashes will confirm that you have remotely enabled valet mode, while a single flash confirms exiting of valet mode. Remote controlled sensor adjustment You may individually test and adjust the settings of each sensor zone: 1. Disarm the system with the remote control
Resumen del contenido incluido en la página 15
Built-In Two-Point AutoImmobilizer Thirty seconds after you turn off the ignition, the system’s built-in two-point AutoImmobilizer electronically disengages your vehicle’s starter motor and electronic fuel pump to ensure against theft of your vehicle. The LED Status Indicator will repeatedly flash to indicate that AutoImmobilization has been activated. Even if a thief were to cut all the wires or even find the Concept 50x control unit and disconnect it, he would still be unable to start the engi
Resumen del contenido incluido en la página 16
Automatic malfunction bypass In the event of a component malfunction, the system will automatically bypass any faulty point and arm all other triggers and sensors to provide the utmost possible protection until you can have the system serviced by your local Authorized Clifford Dealer. If you accidentally armed with the hood, trunk or a door open, just close the open point and the system will again monitor that point. Multiple-event TotalRecall The system’s memory records the identity of the last
Resumen del contenido incluido en la página 17
Smart Self-Powered Siren with Unbreachable Digital ComLink This siren has its own built-in back-up battery, so even if a thief cuts all the wires, the siren will continue to wail. Furthermore, this unique Clifford-designed and manufactured siren has all these important additional enhancements: Unbreachable Digital ComLink: Clifford’s ingenious Digital ComLink is a serial communications link that ensures that — if the system fuse is pulled, or if power to the system is interrupted, or if any sire
Resumen del contenido incluido en la página 18
User-selectable features Your Concept 50x allows you to set many of its features to your own personal preferences. Although the system’s capabilities are extensive, we made the programming procedures very simple: to make a change, you just flick the PlainView switch a few times. Once you’ve changed a few settings, you’ll find that programming Concept 50x is so easy that you can even do it while driving! The system comes with all of its features pre-programmed as noted by the bold type in the Tab
Resumen del contenido incluido en la página 19
EXAMPLE 1: Turn on AutoArm & Lock When the system AutoArms (see page 9), it does not normally lock the doors to ensure that you cannot accidentally lock the keys inside the vehicle. To enable this feature, you’ll note that “AutoArm & Lock” is in column 3, row 2 of the table on pages 19-20. The “off” in bold type indicates the factory setting. The following example will turn on AutoArm & Lock. 1. To enter program mode, turn on the ignition, enter your valet code (as noted on page 10), then hold t
Resumen del contenido incluido en la página 20
4. Note that the QuietChirps feature is in the same column 2, row 5. Simply press the momentary side 5 times.. After a brief pause, you’ll hear two chirps to confirm that the QuietChirps feature is now on. 5. To exit the program mode, turn the ignition off. You’ll hear 3 chirps to confirm program mode exit. You just made three programming changes in only five steps. Easy, isn’t it? Notice again that in this instance, you did not have to re-select column 2. If you don’t touch the switch, the syst
