Manual de instrucciones de Clifford cyber Arrow 3

Resumen del contenido incluido en la página 1

Resumen del contenido incluido en la página 2

United Kingdom customers: Please pardon our American English references and spellings. Trunk and hood references indicate the boot and bonnet, respectively; parking lights are indicator lights; gasoline is petrol. Stan dard Fea tures The fol low ing are stan dard fea tures of this sys tem. Some ve hi cles may re quire op tional par ts/wir ing and a few are in com pati ble with some fea tures. þ EC-approved (Europe) þ Remote panic feature n Smart panic locking/unlocking based on whether the engin

Resumen del contenido incluido en la página 3

NOTE: Your sys tem MUST be in stalled by an Authorized Clif ford Dealer in ac cor dance with the in struc tions we sup ply them. The sys tem is in tended for auto mo biles with a 12- volt bat tery and gasoline- or diesel-powered en gine. Other than the re mote con trols, this sys tem has no user- serviceable parts. Your Authorized Clif ford Dealer can cor rect any sys tem wir ing prob lems and, if ever needed, can re turn any mal func tion ing com po nent to Cl i f ford Elec tron ics for re pair

Resumen del contenido incluido en la página 4

Auto matic re mote con trol low- battery warn ing If your remote control battery is low, you’ll hear a rapid 5-chirp sequence when you disarm instead of the usual one chirp (with the Self-Powered SmartSiren 4 option, you’ll hear a low-pitched chirp). Replacement batteries are available from any Authorized Clifford Dealer. Re mote con trol bat tery re place ment Replacement of a remote control battery is simple, but any Authorized Clifford Dealer will be happy to do it for you without co

Resumen del contenido incluido en la página 5

How to set your own se cret valet code You may choose any 1-4-digit code, but the first digit must not be a zero (e.g., 1023 is a valid code, 0123 is not). See User-selectable features. Ex am ple Let’s say you want to set a valet code of 4301: 1. From the Table of user-selectable features, you would note that the Set a new secret valet code feature is in column 2, row 7. 2. Enter program mode by turning on the ignition, entering your current code, then pressing and holding the ✱ button of th

Resumen del contenido incluido en la página 6

How to in ter pret the LED status in di ca tor The LED on your car’s dashboard or console will inform you of the system status: LED Condition Meaning Off System is disarmed and in normal operating mode (i.e., valet mode is off) On Valet mode is on, the vehicle may be entered without having to disarm Flashing rapidly (ignition off) System is armed and protecting your vehicle Flashing slowly System is disarmed but the Starter AutoImmobilisation has been engaged (European models only) Flashes, paus

Resumen del contenido incluido en la página 7

Smart Au toTest ing™ Each time you remotely arm the system, it tests all triggers and sensors. If the hood or trunk is open, the system will immediately sound 4 chirps and 4 indicator light flashes instead of the usual 2 and 2. If a door is ajar, you’ll receive 2 chirps and 2 flashes, then, 5 seconds later, there will be 4 chirps and 4 flashes. If a sensor is malfunctioning, you will receive the usual 2 chirps and 2 flashes, then, 10 seconds later, there will be 4 chirps and 4 flashes. NOTE: Sin

Resumen del contenido incluido en la página 8

User- selectable fea tures You may set many of the features to your own preferences. Once you’ve changed a few settings, you’ ll find that programming the system is so easy that you can even do it while driving. The system comes with all of its features preprogrammed as noted by the bold type in the Table of user-selectable features. To change any of the settings, use the steps noted below. To restore the feature to its factory setting, just repeat the procedure. NOTE: For greater programming ea

Resumen del contenido incluido en la página 9

Ta ble of User- Selectable Fea tures Feature Select 1 blank press 2 blank presses 3 blank presses 4 blank presses Add a new remote control Chirps: off/on NOTE 5 — Other vehicle‘s remote: 1 ✱ press AutoArming: off/on (1/ 2 chirps) arm/disarm (1 then 2 chirps) NOTE 1 Personalized Siren Sounds*/** NOTE 6 — Other vehicle‘s remote: NOT USED 2 ✱ presses Lock upon AutoArming: off/on trunk release* (2 chirps) NOTE 2 Remote valet mode via Play Personalized Siren Sounds*/**: NOTE 6 — Other vehicle‘s remot