Manual de instrucciones de Clam Corp Fish Trap X 8236

Resumen del contenido incluido en la página 1

model No.
-8236-
Specifications
H e ig h t - 68 inches

Length - 79 inches

W i d t h - 62 inches

Weight - 120 lbs.

p/n 108236
Instruction No. 101914
- Clam Customer Service Information -
NOTICE!! - ONCE USED, THIS SHELTER CANNOT BE RETURNED TO THE STORE. IF YOU HAVE
A WARRANTY CLAIM, PLEASE CONTACT CLAM CORP. CUSTOMER SERVICE BY EMAIL
INQUIREY OR DIRECT BY CALLING:
Customer Service Hrs: - 9am to 4pm, Mon. - Fri. Central Standard Time
Clam Corporation, Inc.
600 Clydesdale Trail

Resumen del contenido incluido en la página 2

- Bill of Materials - ITEM QTY P/N DESCRIPTION ITEM QTY P/NDESCRIPTION 1 4 101048 BLOCK, SLIDE 17 1 101811 BASE, MEDIUM XTR 2 18 101081 WASHER, 1/4" FLAT 18 2 101813 BRKT, RAIL HANGER 3 26 101082 LOCKNUT, 1/4" THIN 19 1 101817 BRKT, FRONT SEAT 4 8 101088 SCREW, 1/4-20 X 0.75 PHILLIPS 20 6 101829 POLE ASSY, STRAIGHT POLE 5 2 101146 ANGLE, 9" LONG ALUMINUM ANGLE 21 2 101830 POLE ASSY, BENT CANOPY 6 4 101147 SCREW, #10 X 1" LONG PHILLIPS 22 2 101836 POLE ASSY, FRONT SPREADER 7 1 101399 PLATE, 6" SQ

Resumen del contenido incluido en la página 3

- Shelter Parts Diagram (See pg. 4 for Assembly) - 3

Resumen del contenido incluido en la página 4

- Step 0ne - 4

Resumen del contenido incluido en la página 5

- Step Two - 5

Resumen del contenido incluido en la página 6

- Step Three - 6

Resumen del contenido incluido en la página 7

- Step Four - 7

Resumen del contenido incluido en la página 8

- Step Five - 8

Resumen del contenido incluido en la página 9

- Step Six - 9

Resumen del contenido incluido en la página 10

- Step Seven - 10

Resumen del contenido incluido en la página 11

- Step Eight - 11

Resumen del contenido incluido en la página 12

- Step Nine - 12

Resumen del contenido incluido en la página 13

- Step Ten - 13

Resumen del contenido incluido en la página 14

- Seating Installation - Angle the Seat Assembly slightly while placing the bottom lip of the Front Seat Bracket under the outside edge of the Base Lip. With the Latch Clip hanging freely, tilt the complete assembly downward until the interior of the Rear Seat Bracket surrounds the Support Tube. 14

Resumen del contenido incluido en la página 15

- Seating Installation (cont.) - Reach under the Rear Seat Bracket and slide the Latch Clip outwards and then up against the underside of the Support Tube. Squeeze the Latch Clip into the horizontal slot of the Rear Seat Bracket. Secure the position of the Latch Clip by pushing it into the two holes located above the horizontal slot of the Rear Seat Bracket. WARNING: ALWAYS KEEP THE LATCH CLIP IN THE SECURED POSITION DURING USE. FAILURE TO DO SO COULD RESULT IN INJURY FROM THE SEAT COMING O

Resumen del contenido incluido en la página 16

- Safety Instructions - Please fully understand and follow all safety instructions as outlined. Failure to do so could result in severe injury or death. Do not use open flame heaters in your ice shelter. Injury or death may result from fire if tent fabric is exposed to open flame. The tent is not fireproof, but the fabric is treated with a fire retardant that meets CPAI-84 specifications. Application of any foreign substance may render the flame retardant properties ineffective. Ice Armo