Resumen del contenido incluido en la página 1
ÖKO-SANTO
1454-6 iU
Built-In Refrigerator
Operating and Installation Instructions
Resumen del contenido incluido en la página 2
Dear customer, Before placing your new refrigerator/freezer into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. These operating instructions are for use with several technically compa- rable models with varying accessories. Please observe the notes which apply to your mo
Resumen del contenido incluido en la página 3
Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Appliance Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disposal of old Appliances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Remove transport packaging . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 4
Important Safety Instructions These warnings are provided in the interests of your safety. Ensure you fully understand them before installing or using the appliance. Your safety is of paramount importance. If you are unsure about the meaning of these warnings contact the Customer Care Department for assistance. Intended use • The refrigerator is intended for use in the home. It is suitable for the cooling, freezing and storing of frozen food, as well as for making ice. If the appliance is used
Resumen del contenido incluido en la página 5
themselves in the appliance when playing (there is risk of suffocation!) or get themselves into other dangerous situations. • Often children cannot recognise the hazards present in household appliances. It is therefore important that you ensure adequate supervision and never let children play with the appliance! Daily Operation • Containers with flammable gases or liquids can leak at low temperatures. There is a risk of an explosion! Do not store any containers with flammable materials such as
Resumen del contenido incluido en la página 6
Disposal Appliance Packaging Information All materials are environmentally friendly. They can be dumped or burned at an incinerating plant without danger. About the materials: The plastics can be recycled and are identified as follows: >PE< for polyethylene, e.g. the outer covering and the bags in the interior. >PS< for polystyrene foam, e.g. the pads, which are all free of chlo- rofluorocarbon. The carton parts are made from recycled paper and should be disposed of at a waste-paper recycling co
Resumen del contenido incluido en la página 7
You can remove any remnants of adhesive using white spirit. Remove all adhesive tape and packing pieces from the interior of the + appliance. Installation Installation Location The appliance should be set up in a well ventilated, dry room. Energy use is affected by the ambient temperature. The appliance should therefore – not be exposed to direct sunlight; – not be installed next to radiators, cookers or other sources of heat; – only be installed at a location whose ambient temperature correspo
Resumen del contenido incluido en la página 8
Reversing the door The side at which the door opens can be changed from the right side (as supplied) to the left side, if the installation site requires. Warning! When changing the side at which the door opens, remove plug from the mains. Left door opening: Remove the grid from the appliance + by pulling it towards. Remove the left side (A) of the grid + cutting it from the rear (see figure). A Re-install the grid to the base of the + appliance by pushing the clasps (a) until they click. a
Resumen del contenido incluido en la página 9
To reverse the opening direction of the door, proceed as shown in the figures: 9
Resumen del contenido incluido en la página 10
600 550 min. Changing over the freezer compartment door Open the freezer compartment door a little way. + Using a small screwdriver, press the + spring in the opening of the lower door bearing slightly upwards and take the door bearing out complete with the door. Position the covering cap (M) on + the opposite side. Turn the freezer compartment door + through 180° and fit the lower door bearing into the lower bearing cavity of the freezer compartment door. Lift the freezer compartment door
Resumen del contenido incluido en la página 11
Remove covering and adjust the + bracket locking nuts. Push the appliance into place. + The plug socket necessary for connection of the appliance to the electricity supply should be positioned, so that the plug is not placed in the recess. Adjust height. + 11
Resumen del contenido incluido en la página 12
Mounting furniture door + 12
Resumen del contenido incluido en la página 13
Screw appliance into + place. Place the covering strip. + 13
Resumen del contenido incluido en la página 14
25 80 Fitting the plinth Important! For the efficient operation of the appliance, it is important that the original ventilation grid is used. • For an opening height dimension A=820 mm and a plinth height dimension a=100 mm, the plinth may be fitted without adjustments. The same applies to an opening height dimension B=870 mm and a plinth height dimension b=150 mm. • For plinth heights greater than a=100 mm, b=150 mm, a cut should be made in the plinth, 580 mm wide, ‚ in the centre of t
Resumen del contenido incluido en la página 15
The mains cable may only be changed by a qualified electrician or competent person. If your appliance needs repairing, please contact your local AEG Service Force Centre. Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED The manufacturer declines any liability should these safety mea- sures not be observed. Before switching on, make sure the electricity supply
Resumen del contenido incluido en la página 16
Description of the appliance View of the appliance ˘ ¯ ` ˜ ˆ ´ Butter/cheese compartment Sliding shelf ` Bottle shelf ´ Vegetable drawers ˆ Storage shelves ˜ ¯ Thermostat ˘ Frozen food storage/freezing food, icemaking. Prior to Initial Start–Up Please clean the appliance interior and all accessories prior to initial + start-up (see section: “Cleaning and Care”). 16
Resumen del contenido incluido en la página 17
Starting up and temperature regulation Connect the appliance to the mains electricity supply. + When the refrigerator compartment door is opened, the internal light- ing is switched on. The temperature selector knob is located on the right hand side of the refrigerator compartment. Setting “0” means: Off. Turning clockwise in direction “1”: Refrigerating unit on, the latter then operates automatically. Setting “1” means: Hightest temperature, warmest set- ting. AEG62 Setting “6” (end-stop) means
Resumen del contenido incluido en la página 18
Interior Accessories Storage shelves/wire trays Various glass or plastic storage shelves and wire trays are included with your appliance - different models have different combinations. You should always slide one of the full size glass storage shelves into + the lowest set of guides, above the fruit and vegetable drawers, and keep it in this position. The height of the storage shelves can be adjusted: To do this pull the storage shelf forward until it can be swivelled + upwards or downwards a
Resumen del contenido incluido en la página 19
Freezing and storing frozen food The freezer compartment is for freezing and storing food. Important! • The temperature in the freezer compartment must be –18°C or col- der before freezing fresh food or storing food already frozen. • Do not freeze too large a quantity at any one time (max. 2 kg per 24 hrs). The quality of the food is best preserved when it is frozen right through to the core as quickly as possible. • Allow warm food to cool down before freezing. The warmth will cause increas
Resumen del contenido incluido en la página 20
Preparation of Ice Cubes Fill the ice cube tray 3/4 full with cold water, place it in the freezer + compartment and leave to freeze. To loosen the frozen cubes, either bend the ice cube tray or hold it + under running water for a few seconds. Important! Never try to free an ice tray that is frozen to the freezer compartment using pointed or sharp edged objects, since you may damage the refrigerating circuit. Use the plastic scraper. Defrosting The fridge defrosts automatically The rear wall of
