Resumen del contenido incluido en la página 1
Operator’s Manual
™
HomeFill
Oxygen Conserving
Cylinder
HF2PCM2KIT
Dealer: This manual MUST be given to the end
user.
User: Before using this cylinder, read this
manual and save for future reference.
For more information regarding
Invacare products, parts, and services,
please visit www.invacare.com
Resumen del contenido incluido en la página 2
WARNING WARNING DO NOT OPERATE THIS EQUIPMENT WITHOUT FIRST READING AND UNDERSTANDING THIS MANUAL. IF YOU ARE UNABLE TO UNDERSTAND THE WARNINGS, CAUTIONS, AND INSTRUCTIONS, CONTACT A HEALTHCARE PROFESSIONAL, DEALER OR A QUALIFIED TECHNICIAN BEFORE ATTEMPTING TO USE THIS EQUIPMENT - OTHERWISE INJURY OR DAMAGE MAY RESULT. WARNING Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers
Resumen del contenido incluido en la página 3
TABLE OF CONTENTS TABLE OF CONTENTS SPECIAL NOTES .............................................. 4 RECEIVING INSPECTION ..................................4 INTENDED USE ................................................4 SECTION 1—GENERAL GUIDELINES ..................5 SECTION 2—FEATURES ....................................8 SECTION 3—TYPICAL PRODUCT PARAMETERS .................................................9 SECTION 4—INSPECTION AND COMPRESSOR INTERFACE .......................................
Resumen del contenido incluido en la página 4
SPECIAL NOTES SPECIAL NOTES Signal words are used in this manual and apply to hazards or unsafe practices which could result in personal injury or property damage. Refer to the following table for definitions of the signal words. SIGNAL WORD MEANING DANGER Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury
Resumen del contenido incluido en la página 5
SECTION 1—GENERAL GUIDELINES SECTION 1—GENERAL GUIDELINES WARNING SECTION 1 - IMPORTANT SAFEGUARDS contains important information for the safe operation and use of this product. DO NOT use this product or any available optional equipment without first completely reading and understanding these instructions and any additional instructional material such as Owner’s Manuals, Service Manuals or Instruction Sheets supplied with this product or optional equipment. If you are unable to underst
Resumen del contenido incluido en la página 6
SECTION 1—GENERAL GUIDELINES WARNING DO NOT attempt to repair product. DO NOT immerse product in any kind of liquid. Store product in a clean area when not in use. Only use Invacare Corporation HF2PCM2 carrying bag. NEVER smoke in an area where oxygen is being administered. ALWAYS confirm prescribed dose before administering to patient and monitor on a frequent basis. DO NOT use if dirt or contaminants are present on or around cylinder, valve, product or connecting devices. NEVER use nea
Resumen del contenido incluido en la página 7
SECTION 1—GENERAL GUIDELINES WARNING DO NOT allow cylinders to tip or fall. Secure gas cylinders so they cannot fall. For storage, ensure cylinder is ALWAYS in upright position. DO NOT store cylinders near sources of heat or flame. This product is equipped with a relief valve. If you hear a loud hissing or popping sound coming from the product, discontinue use of product, turn the flow selector to the “Off” position, and contact your dealer/Home Care equipment provider. DO NOT use while
Resumen del contenido incluido en la página 8
SECTION 2—FEATURES SECTION 2—FEATURES DANGER This product is not intended as a life-sustaining or life-supporting device. Outlet Connection Cannula Indicator Flow Dial Pointer Cylinder Gauge Cylinder Fill Port FIGURE 2.1 Product Diagram Oxygen Conserving Cylinder 8 Part No 1143247
Resumen del contenido incluido en la página 9
SECTION 3—TYPICAL PRODUCT PARAMETERS SECTION 3—TYPICAL PRODUCT PARAMETERS CONSERVER S/N RANGE: 75,000+ INLET PRESSURE RANGE: 300 - 2100 psig INTERNAL REGULATED PRESSURE: 50 psig DIMENSIONS: HF2PCM2KIT: Weight 2.0 lbs (.90 kg) HF2PCM2KIT: Overall Length 8.9 in (22.2 cm) HF2PCM2KIT: Diameter 3.2 in (8.13 cm) PULSE SETTINGS: 1,2,3,4, & 5 FLOW SETTINGS: 2 LPM Continuous SAVINGS RATIO: Up to 5.7:1 CANNULA 4 ft recommended (MS0204) REQUIREMENT: (7 ft long max) std. adult single lumen oxygen nasal
Resumen del contenido incluido en la página 10
SECTION 4—INSPECTION AND COMPRESSOR INTERFACE SECTION 4—INSPECTION AND COMPRESSOR INTERFACE NOTE: Refer to the HomeFill Compressor Owner’s Manual for compressor operating instructions. Cylinder Prefill Inspection WARNING All cylinders MUST be inspected before attempting to fill; otherwise, injury or damage may occur. NEVER smoke in an area where oxygen is being administered. NEVER use near any type of flame or flammable/explosive substances, vapors or atmosphere. NOTE: For this procedure
Resumen del contenido incluido en la página 11
SECTION 4—INSPECTION AND COMPRESSOR INTERFACE External Examination 1. Examine the outside of the cylinder for the following conditions, and replace the cylinder if they exist: • Dents or dings •Arc Burns • Oil or Grease • Any other signs of damage that might cause a cylinder to be unacceptable or unsafe for use. 2. Examine the cylinder for evidence of fire or thermal damage. Evidence includes charring or blistering of the paint, or other protective coating or heat sensitive indicator. If fi
Resumen del contenido incluido en la página 12
SECTION 4—INSPECTION AND COMPRESSOR INTERFACE ! DANGER Improper filling or abuse of this cylinder, or failure to follow these safety instructions may cause serious bodily injury or death. High pressure oxidizing gas vigorously accelerates combustion. DO NOT alter or modify cylinder or related components. DO NOT use Oil or Grease. Keep cylinder, cylinder valve, all equipment and connections free of oil and grease to avoid violent ignition resulting in serious bodily injury or death. ! WARNING F
Resumen del contenido incluido en la página 13
SECTION 4—INSPECTION AND COMPRESSOR INTERFACE Connecting/Disconnecting the Cylinder to/from the Compressor Connecting the Cylinder to the Compressor WARNING NEVER use tools of any kind to connect/disconnect the cylinder and the compressor. Otherwise, severe injury and/or damage may occur. DO NOT drop oxygen cylinders. Use two hands when handling/transporting oxygen cylinders. Otherwise, injury or damage may occur. DO NOT use a liquid leak detector to test for leaks. NOTE: For this procedu
Resumen del contenido incluido en la página 14
SECTION 4—INSPECTION AND COMPRESSOR INTERFACE 4. Momentarily push DOWN on the outer ring (sleeve) of the connector fillport to reset the connector as shown in FIGURE 4.2. NOTE: If the outer ring (sleeve) is in the UP position (GREEN dots not visible), the connector fillport will not be able to accept the cylinder fillport. Pushing DOWN momentarily will reset the connector fillport (GREEN dots visible) to accept the cylinder fillport. PUSH Outer Ring (Sleeve) DOWN Connector Fillport GREEN
Resumen del contenido incluido en la página 15
SECTION 4—INSPECTION AND COMPRESSOR INTERFACE Compressor Cylinder/Regulator Assembly Cylinder Fillport Connector Fillport Outer Ring (Sleeve) Cylinder Gauge PULL UP Regulator Regulator Cylinder Flow Dial Cylinder Outlet (Cannula) Gauge Connection Cylinder Fillport Power Switch Compressor Cradle Connector Outer Ring Fillport (Sleeve) NOTE: Cylinder bag, cylinder fillport cover and connector fillport cover are not shown for clarity. FIGURE 4.3 Connecting the Cylinder to the Compress
Resumen del contenido incluido en la página 16
SECTION 4—INSPECTION AND COMPRESSOR INTERFACE Disconnecting the Cylinder from the Compressor WARNING NEVER use tools of any kind to connect/disconnect the cylinder and the compressor. Otherwise, severe injury and/or damage may occur. NOTE: For this procedure, refer to FIGURE 4.4 on page 16. 1. Press the compressor power switch to the Off (O) position. 2. Grasp the cylinder/regulator assembly in the area behind the cylinder gauge. 3. With the other hand, grasp the outer ring (sleeve) of the
Resumen del contenido incluido en la página 17
SECTION 4—INSPECTION AND COMPRESSOR INTERFACE 5. When the cylinder fillport is disconnected from the connector fillport, release the outer ring (sleeve) of the connector fillport and use two hands to remove the cylinder from the compressor cradle. WARNING The fillport cover on the connector fillport and the cylinder fillport MUST be replaced after filling and whenever not in use. If either of the fillport covers are missing contact your healthcare provider before using. 6. Place the fill
Resumen del contenido incluido en la página 18
SECTION 4—INSPECTION AND COMPRESSOR INTERFACE Changing the Carrying Position of the Cylinder NOTE: For this procedure, refer to FIGURE 4.6 on page 19. The cylinder MUST be kept in the cylinder bag at all times except when cleaning. The cylinder MUST be in the bag to ensure the cylinder couples with the HomeFill properly. 1. Unhook and remove the cylinder bag and belt from body. 2. Re-attach the buckle. NOTE: Either end of the belt can be used in this procedure. 3. Unthread one end of the belt
Resumen del contenido incluido en la página 19
SECTION 4—INSPECTION AND COMPRESSOR INTERFACE ii. Thread the end of the belt that has no buckle and retaining loop through the two loops on the cylinder bag. See Detail “B”. NOTE: The web material on the belt should be facing away from the cylinder bag. 7. Insert the retaining loop onto the belt. 8. Slide the belt through the buckle. 9. Adjust the belt to your waist size. 10. Secure the loose end of the belt with the retaining loop. Use these loops for carrying the VIEW OF CYLINDER HFII bot
Resumen del contenido incluido en la página 20
SECTION 4—INSPECTION AND COMPRESSOR INTERFACE Cleaning the Cylinder Bag NOTE: Skip STEP one if the belt is to be cleaned with the cylinder bag. 1. Unhook and remove the cylinder bag and belt from body. 2. Re-attach the buckle. NOTE: Either end of the belt can be used in this procedure. 3. Unthread one end of the belt from one side of the buckle. 4. Slide the retaining loop off the belt. 5. Pull the end of the belt that has no buckle and retaining loop through the two retaining loops on the cyl
