Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
ΣΕ435_ΙΦΥ_ΕΝ.βοοκ Παγε 3 Φριδαψ, ∆εχεµβερ 16, 2005 1:15 ΠΜ
Resumen del contenido incluido en la página 3
Contents EN 4 Important Information 4 For your safety 4 Installation requirements 4 Need Help? 5 What’s in the box? 6Your SE735 6 Overview of the handset 9 Overview of the base station 10 Main features of your SE735 12 Connect 13 Install 17 USB Connection 21 Call 26 Phonebook 31 Call log 33 SMS 41 Clock & Alarm 43 Personal Settings 49 Advanced Settings 55 Network Services 58 Games 59 Telephone Answering Machine (TAM) 66 Troubleshooting 69 Information 70 Index 3
Resumen del contenido incluido en la página 4
Important Information EN For your safety This equipment is not designed to make emergency calls in the event of a power failure. Alternative arrangements should be made for access to emergency calls. To avoid damage or malfunction: - Do not allow the product to come into contact with liquid. - Do not open it as you could be exposed to high voltages. - Never use any battery type other than the one supplied. - Do not hold the handset too close to your ear when the phone is ringing or when activat
Resumen del contenido incluido en la página 5
What’s in the box? EN The following accessories are included with your SE735: 2 AAA Base station Power supply for Line cord Handset rechargeable base station batteries Battery door Headset USB cable Belt clip User Guide Quick Start Installation CD Warranty card Guide The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket. In multihandset packs, you will find one or more ad
Resumen del contenido incluido en la página 6
Your SE735 EN Overview of the handset Earpiece LCD Screen Up/Down Navigation keys Event LED Right Soft key Left Soft key headset jack Talk key Hang-up key Alphanumeric keypad Case key / Pause key / Keypad lock Ringer off key key Loudspeaker Intercom key key Microphone USB socket USB socket 6
Resumen del contenido incluido en la página 7
Your SE735 EN Handset keys Press To Enter the main menu from stand-by mode. m Select the function displayed on the handset screen directly above it. (Left soft key) Activate mute function during a call. Switch on the backlight. Go to redial list from stand-by mode. > Select the function displayed on the handset screen directly above it. (Right soft key) Initiate a second call, call transfer or consult the phonebook during a call. Switch on the backlight. Answer an incoming external or internal c
Resumen del contenido incluido en la página 8
Your SE735 EN Display icons & symbols In stand-by mode, several icons & symbols may be displayed on the handset. The handset is registered and within range of the base station. It blinks when the handset is out of range or is searching for a base. Battery symbol indicating 3 different battery levels. The ringer volume is set to zero. The keypad is locked. There is an external incoming call, an external call is connected or an external call is held. There is an internal incoming call, an internal
Resumen del contenido incluido en la página 9
Your SE735 EN Overview of the base station Volume keys Time Message number Delete key Next message key Paging key SIM card tray Answer Machine Previous message/ Play/Stop key On/Off key Replay message key Base station keys Page handset. c Long press to start registration procedure. Short press to turn the answering machine On/Off. o Increase speaker volume during message playback. v Reduce speaker volume during message playback. Delete current message during message playback. x Long press to del
Resumen del contenido incluido en la página 10
Your SE735 EN LCD Message counter Displays current time when the answering machine is switched off or in stand-by mode. Displays date & time of recording and message number during playback. Blinking: Indicates number of new messages. Steady: Indicates number of old messages. 2 bars flashing: Indicates that there is no more memory left. Indicates the volume level (L0 - L9) when v is pressed. Indicates the current message number during playback. Main features of your SE735 The following is an over
Resumen del contenido incluido en la página 11
Your SE735 EN Menu navigation The basic steps of navigating through the menus and options are as follows: Task Action Illustration Enter main menu/menu options Choose MENU by pressing the key directly below it (left soft key m) Philips 1 18:00 08-08 REDIAL MENU : m > • Go to a specific menu/option 1. Press : key to scroll to your desired menu/option • Confirm your selection 2. Choose SELECT by pressing the key directly below it (left soft key m) m : > 1 2 In this example, the alarm is On Once.
Resumen del contenido incluido en la página 12
Connect EN The location of your base station can have an effect on the range and performance of your SE735 (see TIP below). Connecting the Base Station 1. Place the base station in a central location near the telephone line socket and electricity sockets. 2. Connect the line cord and the power cable to the proper connector at the back of the base station. 1. 2. B A Connect the power supply A Connect the line cord to the line socket B 3. Connect the other end of the line cor
Resumen del contenido incluido en la página 13
Install EN Install battery Your SE735 is supplied with 2 rechargeable batteries allowing approximately up to 12 hours of talk-time and up to 168 hours stand-by time. Before using the handset, the batteries have to be installed and fully charged. 1. Slide out the battery cover. 2. Place the batteries as indicated and replace the cover. Charge battery 1. Place the handset on the charging cradle of the base station. A beep is emitted if the handset is placed correctly. 2. A charging animation on t
Resumen del contenido incluido en la página 14
Install EN Out of range warning The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively. When the handset moves beyond operation range, the antenna icon will blink. Attach/Remove belt clip A belt clip allows you to carry your handset on your belt. 1. To attach the belt clip to your handset, fit the tabs on the belt clip into the slots at the back of the handset and push into place. 2. To remove the belt clip, simply pull the clip away from the handset. Configur
Resumen del contenido incluido en la página 15
Install EN 3. Press mSELECT to enter Set Date/Time. 4. Enter current time (HH:MM) and current date (DD/MM/YY) and press mOK. WARNING If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. The availability of date & time update is dependent on your network provider. Please check the date & time settings in your ISDN system or contact your network provider. Now, you are ready to use your phone. Basic operations of your SE735 Make a call Ente
Resumen del contenido incluido en la página 16
Install EN Screen and keypad backlight The backlight remains on for 20 seconds after each activation such as an incoming call, key presses, lifting up the handset off the base station, etc. The colour of the LCD and keypad backlight is WHITE. For setup details, please refer to "Backlight time" on page 48. Event LED The event LED on your handset blinks when there is a new message recorded on your telephone answering machine. If you have subscribed to Caller Line Identification, the event LED al
Resumen del contenido incluido en la página 17
USB Connection EN USB connection Your SE735 is able to download melodies (maximum 20 KB, in MIDI format), wallpapers (128 x 160 pixels), as well as portrait pictures for fotocall (96 x 64 pixels) from your PC to your handset via USB connection. There are also a number of ring melodies, wallpaper and fotocall pictures pre-installed in your handset and the installation CD. Before you can download PC files to your handset, you need to install the Download Software. Install USB download software 1.
Resumen del contenido incluido en la página 18
USB Connection EN Connect the handset to your PC USB connection can only be established when the handset is in stand-by mode and the backlight is switched on. If the handset is in menu mode or goes into screensaver mode, press e key or any key to return to stand-by mode before you connect the handset to the PC. To connect the handset to your PC, plug one end of the USB jack into the USB socket at the bottom of the handset, and then plug the other end of the USB jack to the USB port of your PC. W
Resumen del contenido incluido en la página 19
USB Connection EN Ringtone Selection icon window Download button Play button Progress bar 3. Select the MIDI file you wish to download from the selection window and click the PLAY button to listen to the MIDI file to make sure it is the correct ring melody you wish to download onto your handset. 4. Make sure that the handset is connected to the PC and click the Download button. A progress bar is displayed to indicate the download progress. 5. When the download is completed, safely remove your ha
Resumen del contenido incluido en la página 20
USB Connection EN 4. The image will appear in the Image window and the actual size will be displayed. You may resize the image in the Image window and select which part of the image to be used as wallpaper. You can also preview the image in the Preview window to make sure this is how you would like your wallpaper to appear on your handset. 5. Make sure that the handset is connected to the PC and click the Download button. A progress bar is displayed to indicate the download progress. 6. When t
