Resumen del contenido incluido en la página 1
ACCUSPLIT EAGLE 920HRM
Heart Rate Monitor
1.0 Introduction
Thank you for your purchase. This watch includes 5 functional modes: Current Time, Heart
Rate Alert, Daily Alarm, Chronograph and Timer Mode.
With this watch, you also get ECG accurate heart rate readings without the use of a chest
strap! How? Simply put the watch on your wrist, place two fingers on the sensors located on
the face of the watch, and watch your heart rate display in the digital window within
seconds!
WA
Resumen del contenido incluido en la página 2
4.0 Button Operation Summary [mode] Button • Press the button to select one of the 5 functional modes • In functional modes: Press and hold the button to select setting display • In any setting display: Press the button to choose between different settings. Press and hold the button to exit setting sequence. [start/stop] Button • In Current Time Mode: press the button to select between the Date Display and Time Display • In Daily Alarm Mode: Press the button to select between ON a
Resumen del contenido incluido en la página 3
Functional Modes This watch includes 5 functional modes: 1) Current Time Mode 2) Heart Rate Alert Mode 3) Daily Alarm Mode 4) Chronograph Mode 5) Timer Mode. Every functional mode has one or more functional displays; these functional displays provide the supplementary information to the corresponding functional mode. To Switch among the Functional Modes and Displays To select among the above functional modes, press the [mode] button following the adjacent diagram. 6.0 Current
Resumen del contenido incluido en la página 4
6.1 Setting the Current Time Mode To Set the Current Time Mode To set the current time and date, and their display formats, press and hold the [mode] button for about 2 seconds to select the setting display (the second digits will start flashing). The Setting Sequence • When the seconds digits start to flash, press the [mode] button to move the flashing following the setting sequence of the adjacent diagram or press the [start/stop] or [reset] button to reset the second digits to
Resumen del contenido incluido en la página 5
7.0 About Heart Rate Measurement In exercise or sports, your heart naturally speeds up in pumping blood to the body in accordance with your increased energy level. This watch can calculate that increase expressed as the number of beats per minutes (bpm) to determine a safe target heart rate for each individual. PRECAUTIONS/TIPS 1. A heart rate sensor is located on the back of the watch. The back sensor must make firm contact with the user's skin during measurement. 2. DO N
Resumen del contenido incluido en la página 6
7.1 Heart Rate Measurement Heart Rate Measurement • In any functional mode, press the 6:00 sensor with your index finger and your middle finger place on the 12:00 sensor located on the face of the watch. • Rest your thumb on the side of your wrist. Make sure the sensor on the back of the watch sits firmly on your skin. • You will hear a beep tone once your heart rate has been acquired (this usually take 5-8 seconds). • Remove your fingers from the sensors and view your heart
Resumen del contenido incluido en la página 7
8.0 Heart Rate Alert Function About the Heart Rate Alert Function • By presetting a target heart rate range, you can activate the heart rate alert function. This function helps prevent the user from going over or under a target heart rate. • In course of doing exercise or sports: When the user takes a heart rate measurement that is out of the preset desirable range, this watch will beep twice. Hence, the user could render the appropriate actions such as slow-down or speed up the ex
Resumen del contenido incluido en la página 8
8.1 Heart Rate Alert Mode When Heart Rate Alert Function is ON The following displays will be appeared on the display every 2 seconds: 1) Upper Limit Display - the preset upper limit that set for the heart rate alert function 2) Lower Limit Display - the preset lower limit that set for the heart rate alert function 3) Age and Gender Display (see note 1) - the age and gender that set for the upper and lower limit calculation. When Heart Rate Alert Function is OFF The '---' and '
Resumen del contenido incluido en la página 9
8.2 Setting the Heart Rate Alert Mode To Set the Heart Rate Alert Mode To preset your target heart rate: 1) Input your target heart rate range (lower and upper limits), or 2) Input your age and gender (lower and upper limits will be automatically calculated). To set the heart rate alert mode, press and hold the [mode] button for about 2 seconds to select the setting display (the 'age' digits will start flashing). The Setting Sequence • When the 'age' digits start to flash, press
Resumen del contenido incluido en la página 10
9.0 Daily Alarm Mode Daily Alarm Mode • The Alarm Time (hours, minutes) appears on the display. To Turn the Daily Alarm ON and OFF • Press the [start/stop] button once to choose ON or OFF. • When the Daily Alarm Indicator ' ' appears (the daily alarm is ON), the watch starts beeping at the alarm time for about 30 seconds. To Turn the Hourly Chime ON and OFF • Press the [reset] button once to choose ON or OFF. • When the Hourly Chime Indicator ' ' appears (the hourly chime is ON)
Resumen del contenido incluido en la página 11
9.1 Setting the Daily Alarm Mode To Set the Daily Alarm Mode To set the Daily Alarm Mode: press and hold the [mode] button to select the setting display (the 'hour' digits will start flashing). The Setting Sequence • When the 'hour'' digits start to flash, press the [mode] button to select between hour and minute setting, or press the [start/stop] or [reset] button to scroll through the setting (hold the button down to scroll the setting at a faster pace). • When the 'minute' d
Resumen del contenido incluido en la página 12
10.0 Chronograph Mode Chronograph Mode Chronograph Mode measures 2 different periods of time: 1) Elapsed time 2) Cumulative elapsed time Chronograph Display • The display shows the 'Zero' display, if the watch or the chronograph has been reset. • The Chronograph Mode Indicator 'CHR' exhibits on the upper row of the display. • The chronograph time (hours, minutes, seconds and 1/100 second) exhibits on the lower row of the display. • The maximum counting range of the chronograph i
Resumen del contenido incluido en la página 13
10.1 Using the Chronograph Mode To Use the Chronograph Mode • In 'Zero' Display, press the [start/stop] button once to start the counting. When it is counting, press the [start/stop] button once again to stop the counting, and the elapsed time of which the chronograph is counting will appear. • When the elapsed time is displaying, repeat the above mentioned key operations to get the accumulative elapsed time or press the [reset] button to reset the chronograph (ready for a new coun
Resumen del contenido incluido en la página 14
11.0 Timer Mode Timer Mode • This Watch has a countdown timer to keep track of a faxed period of time (target time) entered by the user. The Target Time • The user can set a target time of up to 99 hours, 59 minutes 59 seconds. Timer Display • The Timer Mode Indicator 'TMR' exhibits on the upper row of the display. • The target time (hours, minutes and seconds) exhibits on the lower row of the display. ACCUSPLIT EAGLE 920HRM Instructions 14 of 18
Resumen del contenido incluido en la página 15
11.1 Setting the Timer Mode To Set the Timer Mode • To set the target time in timer mode, press and hold the [mode] button for about 2 seconds (the 'hour' digits will start flashing) The Setting Sequence • When the 'hour' digits start to flash, press the [mode] button to move the flash following the sequence of the adjacent diagram, or press the [start/stop] or [reset] button to scroll through the setting (hold the button down to scroll the setting at a faster). • When one
Resumen del contenido incluido en la página 16
11.2 Using the Timer Mode To Use the Timer Mode • Once a target time has been set (for example 30 minutes), press the [start/stop] button once to start the countdown. The countdown time will be displayed continuously throughout the countdown. • To stop countdown, press the [start/stop] button once. To Reset the Timer • To reset the timer to the preset target time before the countdown reaches zero, press the [reset] button once (when the timer has stopped counting). • To start t
Resumen del contenido incluido en la página 17
12.0 Specifications Current Time Mode • Hour, minute and second • Month, day, day of week and year • 12 / 24 hour format selectable • Month-day/Day-month selectable • Auto calendar from year 2000 to 2099 • Hourly Chime on the hours Hearth Rate Alert Mode • Measuring range: 43 to 200 beats per minute • 1 Heart Rate Alert (upper and lower limit) Daily Alarm Mode • Daily Alarm: 1 daily alarm • Alarm Duration: about 30 seconds Chronograph Mode • Resolution: 1/100 second • Cou
Resumen del contenido incluido en la página 18
13.0 Potential Causes for: NO Heart Rate Reading or Long Response Time 1) Cause: Dry Skin. Solution: Apply conductive gel or saliva thoroughly to fingers and wrist area. (Even water will help if conductive gel is not available). 2) Cause: Fingers are not placed firmly over the sensors. Solution: Make sure fingers (not the tips) lay flat and firmly over the sensors and watch is placed securely on wrist. Do not use the very tips of your fingers (i.e. visualize tip toeing with your
