Manual de instrucciones de Cornelius 45098

Resumen del contenido incluido en la página 1

Pump Tubing Replacement Instructions
INSTALLATION INSTRUCTIONS
PUMP TUBING REPLACEMENT (KIT PART NO. 45098)
!
WARNING:
TDisconnect power to the unit before servicing. Follow all lock out/tag out procedures established by the user. Verify
all power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
Perform the following procedure to remove the platform (See Figure 1.):
1. Remove the concentrate container from the dis

Resumen del contenido incluido en la página 2

Pump Tubing Replacement Instructions 5. Remove the old tubing from the pump body. If any of the rollers come out with the tubing, place them back into the housing. Be sure to align the roller assembly shaft keyway to the motor shaft key so that the two interlock. (see Figure 3 or Figure 4 for step by step pictorial instructions). 6. Firmly press the new tubing into the pump body around the roller assembly, being sure to keep the protrud- ing ends of the tubing even with each other. 7. Once the

Resumen del contenido incluido en la página 3

Pump Tubing Replacement Instructions Figure 3. Three Roller Pump Assembly © 1999-2010, IMI Cornelius Inc. - 3 - Publication Number: 7285285

Resumen del contenido incluido en la página 4

Pump Tubing Replacement Instructions Figure 4. Two Roller Pump Assembly Publication Number: 7285285 - 4 - © 1999-2010, IMI Cornelius Inc.