Resumen del contenido incluido en la página 1
USER’S MANUAL
FX4 MOTORIZED TREADMILL
MODEL NUMBER: FX4M
USER WEIGHT LIMITATION: 350lbs.
TOLL FREE CUSTOMER SERVICE NUMBER: 1.888.800.1167
SERIAL NUMBER (found on frame):
Resumen del contenido incluido en la página 2
2 FX4M MOTORIZED TREADMILL PRECAUTIONS For future service or related questions: Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your Smooth Fitness treadmill. Name: ______________________________ Phone Number: ___________________ Receipt: ______________________ Precautions: WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and informatio
Resumen del contenido incluido en la página 3
3 FX4M MOTORIZED TREADMILL POWER REQUIREMENTS Power Requirements: IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. This treadmill can be seriously damaged by sudden volta
Resumen del contenido incluido en la página 4
4 FX4M MOTORIZED TREADMILL PREASSEMBLY Open the boxes: You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this product to be assembled properly. If you are missing any parts or have any assembly questions call your local Smooth Retailer. Gather your tools: Before starting the assembly of your unit, make su
Resumen del contenido incluido en la página 5
5 FX4M MOTORIZED TREADMILL HARDWARE COMPARISON CHART Hardware chart: For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help you identify those items that may be unfamiliar to you. NO. DESCRIPTION QTY. 2 Safety Key 1 4 M6 x 15mm Console Screw 2 11 #8 x 15mm Screw 4 12 #4 x 19mm Screw 4 18 M8 x 19mm Screw 4 19 M8 x 78mm Bolt 2 20 Metal Cap 2 26 Plastic Cap 2 27 M8 x 15mm Screw 4 34 M6 x 20mm Screw 2
Resumen del contenido incluido en la página 6
6 FX4M MOTORIZED TREADMILL PARTS LIST No. Description Qty. Order No. No. Description Qty. Order No. Base Frame End Cap – 1 Computer 1 FX4M-01 30 1 FX4M-30 Left 1 Base Frame End Cap – 2 Safety Key 1 FX4M-02 31 1 FX4M-31 Left 2 Base Frame End Cap – 3 Computer Support 1 FX4M-03 32 1 FX4M-32 Right 1 Base Frame End Cap – 4 M6 x 15mm Console Screw 2 FX4M-04 33 1 FX4M-33 Right 2 5 Plastic Ring 1 FX4M-05 34 M6 x 20mm Screw 2 FX4M-34 6 M5 x 10mm Screw 1 FX4M-06 35 Base F
Resumen del contenido incluido en la página 7
7 FX4M MOTORIZED TREADMILL PARTS LIST No. Description Qty. Order No. No. Description Qty. Order No. 59 M10 x 35mm Screw 1 FX4M-59 89 Transfer Board 1 FX4M-89 60 Elevation Motor 1 FX4M-60 90 Frame 1 FX4M-90 61 Tube Clamp 2 FX4M-61 91 Micro Switch 1 FX4M-91 62 M5 x 12mm Screw 2 FX4M-62 92 Metal Plate 2 FX4M-92 63 Gear Sleeve 1 FX4M-63 93 M8 x 30 Screw 4` FX4M-93 64 Bumper 1 FX4M-64 94 Cushion 10 FX4M-94 65 U Bracket 1 FX4M-65 95 13 x 6.5 Washer 3 FX4M-95 66 M16 x 54 Screw
Resumen del contenido incluido en la página 8
8 FX4M MOTORIZED TREADMILL PARTS LIST No. Description Qty. Order No. No. Description Qty. Order No. 119 22 x 10 Washer 2 FX4M-119 120 14 x 10 x 8 Bushing 2 FX4M-120 121 Pivot Shaft 1 FX4M-121 122 Shock 1 FX4M-122 123 14 x 10 x 18.5 Bushing 2 FX4M-123 124 M10 x 120mm Screw 1 FX4M-124 125 Cushion 2 FX4M-125 126 Spring Bracket 2 FX4M-126 127 Motion Control Sensor 2 FX4M-127
Resumen del contenido incluido en la página 9
9 FX4M MOTORIZED TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY. Visit us at: www.evofitness.com
Resumen del contenido incluido en la página 10
10 FX4M MOTORIZED TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY. Visit us at: www.evofitness.com
Resumen del contenido incluido en la página 11
11 FX4M MOTORIZED TREADMILL ASSEMBLY STEP 1: Remove your treadmill from the carton and place it on the floor in an open area as shown in FIG-1. First make sure to connect the wires. Then insert the Left and Right Handle Uprights (21 and 22) into the base Frame (46) and secure with 6 x 13mm Washers (25), M6 x 55mm Screws (24), Plastic Caps (26) and M8 x 15mm Screws (27). Visit us at: www.evofitness.com
Resumen del contenido incluido en la página 12
12 FX4M MOTORIZED TREADMILL ASSEMBLY STEP 2: Remove the M5 x 10mm Screw (6) then rotate the Computer Support (3) up to the correct position as shown and secure with the M5 x 10mm Screw (6). Visit us at: www.evofitness.com
Resumen del contenido incluido en la página 13
13 FX4M MOTORIZED TREADMILL ASSEMBLY STEP 3: Rotate the Computer (1) up to its proper angle and secure with M6 x 15mm Console Screws (4). Visit us at: www.evofitness.com
Resumen del contenido incluido en la página 14
14 FX4M MOTORIZED TREADMILL ASSEMBLY STEP 4: Attach the Cross Tube (48) to the Left and Right Handle Uprights (21 and 22) and secure with the Metal Caps (20) and M8 x 78mm Bolts (19). Secure the Computer Support (3) to the Left and Right Handle Uprights (21 and 22) by tightening the M8 x 25mm Screws (17). Visit us at: www.evofitness.com
Resumen del contenido incluido en la página 15
15 FX4M MOTORIZED TREADMILL ASSEMBLY STEP 5: Fully tighten M5 x 10mm Screws (6), M8 x 25mm Screws (17) and M8 x 78mm Bolts (19) at this time. Visit us at: www.evofitness.com
Resumen del contenido incluido en la página 16
16 FX4M MOTORIZED TREADMILL ASSEMBLY STEP 6: Connect the Sensor Wires then attach the Right and Left Handlebars (16 and 15) to the Right and Left Handle Uprights (22 and 21) and secure using M8 x 19mm Screws (18). Visit us at: www.evofitness.com
Resumen del contenido incluido en la página 17
17 FX4M MOTORIZED TREADMILL ASSEMBLY STEP 7: Mount the Handle Cover Right - 1 (10) and the Handle Cover Right - 2 (9) to the Right Handle Upright (22) and secure with #8 x 15mm Screws (11) and #4 x 19mm Screws (12). Mount the Handle Cover Left - 1 (7) and the Handle Cover Left - 2 (8) to the Left Handle Upright (21) and secure with #8 x 15mm Screws (11) and #4 x 19mm Screws (12). Visit us at: www.evofitness.com
Resumen del contenido incluido en la página 18
18 FX4M MOTORIZED TREADMILL ASSEMBLY STEP 8: Attach the Base Frame End Caps (35) to the Left and Right Handle Upright (21 and 22) and secure using the M6 x 20mm Screws (34). Visit us at: www.evofitness.com
Resumen del contenido incluido en la página 19
19 FX4M MOTORIZED TREADMILL FOLDING INSTRUCTIONS FOLDING INSTRUCTIONS: Your treadmill can be folded up for space saving storage. To do this first be sure that the deck is at the lowest incline level. Simply lift the deck up from the rear of the treadmill and fold up until it locks in place. TO PREVENT INJURY BE SURE YOU HAVE A FIRM HOLD WHEN RAISING THE DECK. You will hear a “click” sound as the lock engages. Visit us at: www.evofitness.com
Resumen del contenido incluido en la página 20
20 FX4M MOTORIZED TREADMILL TRANSPORT INSTRUCTIONS HOW TO ROLL AWAY THE FX4 TREADMILL: After folding the treadmill tilt it to one side (you may need the help of a friend), reach under the Base Frame (46) and pull down the Caster Bracket (43). Repeat this procedure on the other side. Then to roll away for storage simply grab the handlebars and push as shown below. NOTE: After moving the treadmill to the desired location, make sure to put the Caster Brackets (43) back into t
