Resumen del contenido incluido en la página 1
s
TC63
Siemens Cellular Engine
Version: 00.490
DocId: TC63_ATC_V00.490
AT Command Set
Resumen del contenido incluido en la página 2
TC63 AT Command Set s Document Name: TC63 AT Command Set Version: 00.490 Date: May 24, 2005 DocId: TC63_ATC_V00.490 Status Confidential / Draft - Do not copy General Notes Product is deemed accepted by Recipient and is provided without interface to Recipient´s products. The Product constitutes pre-release version and code and may be changed substantially before commercial release. The Product is provided on an “as is” basis only and may contain deficiencies or inadequacies. The Produ
Resumen del contenido incluido en la página 3
TC63 AT Command Set s Contents Contents 1. Introduction............................................................................................................................................ 14 1.1 Scope of the document ................................................................................................................. 14 1.2 Related documents ....................................................................................................................... 15 1.3 Docume
Resumen del contenido incluido en la página 4
TC63 AT Command Set s Contents 2.13 AT+CSCS Select TE character set ............................................................................................. 51 2.14 AT^SCFG Extended Configuration Settings ............................................................................... 52 2.15 AT^SM20 Set M20 compatibility mode ....................................................................................... 65 3. Status Control Commands ..............................................
Resumen del contenido incluido en la página 5
TC63 AT Command Set s Contents 5.6 AT+CPWD Change Password .................................................................................................. 124 5.7 AT^SPWD Change Password................................................................................................... 128 5.8 AT^SCSL Customer SIM Lock .................................................................................................. 130 6. Identification Commands.............................................
Resumen del contenido incluido en la página 6
TC63 AT Command Set s Contents 7.26 AT^SCNI List Call Number Information..................................................................................... 175 7.27 AT^SLCD Display Last Call Duration ........................................................................................ 176 7.28 AT^STCD Display Total Call Duration....................................................................................... 177 7.29 ATP Select pulse dialing ........................................
Resumen del contenido incluido en la página 7
TC63 AT Command Set s Contents 9.14 AT+CUSD Supplementary service notifications........................................................................ 233 10. Internet Service Commands ............................................................................................................... 235 10.1 AT^SICS Internet Connection Setup Profile.............................................................................. 237 10.1.1 Example: Default values of a CSD connection profile........
Resumen del contenido incluido en la página 8
TC63 AT Command Set s Contents 11.17 ATA Manual response to a network request for PDP context activation................................... 303 11.18 ATD*99# Request GPRS service.............................................................................................. 304 11.19 ATD*98# Request GPRS IP service ......................................................................................... 305 11.20 ATH Manual rejection of a network request for PDP context activation..............
Resumen del contenido incluido en la página 9
TC63 AT Command Set s Contents 13.24 AT^SMGO Set or query SMS overflow presentation mode or query SMS overflow ................. 357 13.25 AT^SMGR Read SMS message without setting status to REC READ ..................................... 359 13.26 AT^SSCONF SMS Command Configuration ........................................................................... 360 13.27 AT^SSDA Set SMS Display Availability .................................................................................... 361 13
Resumen del contenido incluido en la página 10
TC63 AT Command Set s Contents 18.3 ATM Set monitor speaker mode................................................................................................ 412 18.4 AT+CLVL Loudspeaker volume level........................................................................................ 413 18.5 AT+CMUT Mute control ............................................................................................................ 414 18.6 AT+VTD Tone duration .....................................
Resumen del contenido incluido en la página 11
TC63 AT Command Set s Contents 21.2 Star-Hash (*#) Network Commands............................................................................................ 463 21.3 Available AT Commands and Dependency on SIM PIN ............................................................. 466 21.4 Availability of AT Commands Depending on Operating Mode of ME.......................................... 473 21.5 AT Command Settings storable with AT&W..........................................................
Resumen del contenido incluido en la página 12
TC63 AT Command Set s List of Tables List of Tables Table 1.1: Symbols used to mark the type of parameters ...........................................................................17 Table 1.2: Symbols used to indicate the correlations with other commands............................................... 17 Table 1.3: Symbols used to mark different types of default values of parameters .....................................17 Table 1.4: Types of AT commands and responses ........................
Resumen del contenido incluido en la página 13
TC63 AT Command Set s List of Figures List of Figures Figure 1.1: Main character table of GSM 03.38 alphabet ............................................................................. 22 Figure 1.2: Extension character table of GSM 03.38 alphabet ..................................................................... 23 Figure 15.1: Basic Remote SIM Access Usage Scenario............................................................................. 373 Figure 15.2: SIM usage states of SAP serve
Resumen del contenido incluido en la página 14
TC63 AT Command Set s 1. Introduction 1. Introduction 1.1 Scope of the document This document presents the AT Command Set for the Siemens Cellular Engine TC63 Version 00.490. Before using the Cellular Engine or upgrading to a new firmware version please read the latest product informa- tion provided in the Release Notes [1]. More information is available at the Siemens Website: http://www.siemens.com/wm. TC63_ATC_V00.490 Page 14 of 501 5/24/05 Confidential / Draft - Do not copy
Resumen del contenido incluido en la página 15
TC63 AT Command Set s 1.2 Related documents 1.2 Related documents [1] TC63 Release Notes, Version 00.490 [2] TC63 Hardware Interface Description, Version 00.490 [3] GPRS Startup User's Guide [4] Remote-SAT User's Guide [5] Multiplexer User's Guide [6] Multiplex Driver Developer's Guide for Windows 2000 and Windows XP [7] Multiplex Driver Installation Guide for Windows 2000 and Windows XP [8] Application Note 02: Audio Interface Design [9] Application Note 16: Updating TC63 Firmware [10] Applic
Resumen del contenido incluido en la página 16
TC63 AT Command Set s 1.3 Document conventions 1.3 Document conventions Throughout the document, the GSM engines are referred to as ME (Mobile Equipment), MS (Mobile Station), TA (Terminal Adapter), DCE (Data Communication Equipment) or facsimile DCE (FAX modem, FAX board). To control your GSM engine you can simply send AT Commands via its serial interface. The controlling device at the other end of the serial line is referred to as TE (Terminal Equipment), DTE (Data Terminal Equipment) or pl
Resumen del contenido incluido en la página 17
TC63 AT Command Set s 1.3 Document conventions 1.3.2 Superscript notation for parameters and values Table 1.1: Symbols used to mark the type of parameters Parameter type Meaning (num) Parameter value must be numeric type (str) Parameter value must be string type Table 1.2: Symbols used to indicate the correlations with other commands Parameter option Meaning (&W) Parameter value will be stored with AT&W (&V) Parameter value will be displayed with AT&V (ˆSNFW)
Resumen del contenido incluido en la página 18
TC63 AT Command Set s 1.4 AT Command Syntax 1.4 AT Command Syntax The "AT" or "at" prefix must be set at the beginning of each command line. To terminate a command line enter . Commands are usually followed by a response that includes "". Through- out this document, only the responses are presented, are omitted intentionally. Table 1.4: Types of AT commands and responses AT command type Syntax Function Test command AT+CXXX=? The mobile equipment returns
Resumen del contenido incluido en la página 19
TC63 AT Command Set s 1.4 AT Command Syntax 1.4.2 Combining AT commands on the same command line You may enter several AT commands on the same line. This eliminates the need to type the "AT" or "at" prefix before each command. Instead, it is only needed once at the beginning of the command line. Use a semicolon as command delimiter. The table below lists the AT commands you cannot enter together with other commands on the same line. Oth- erwise, the responses may not be in the expected order.
Resumen del contenido incluido en la página 20
TC63 AT Command Set s 1.5 Supported character sets 1.5 Supported character sets The ME supports two character sets: GSM 03.38 (7 bit, also referred to as GSM alphabet or SMS alphabet) and UCS2 (16 bit, refer to ISO/IEC 10646). See AT+CSCS for information about selecting the character set. Character tables can be found below. Explanation of terms • International Reference Alphabet (IRA) IRA means that one byte is displayed as two characters in hexadecimal format. For example, the byte 0x36 (d
