Manual de instrucciones de Bunn Autopod Brewer 411701

Resumen del contenido incluido en la página 1

PROGRAMMING MANUAL
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
41170.0000B 05/12 ©2010 Bunn-O-Matic Corporation

Resumen del contenido incluido en la página 2

BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal servers and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor. 2) All other equipment - 2 years parts and 1 year labor plus added warranties as specifi ed below: a) Electronic circuit and/or control boards - parts and labor for 3 years. b) C

Resumen del contenido incluido en la página 3

CONTENTS LOCKOUT SWITCH .............................................................................................4 PROGRAMMING SWITCHES...............................................................................5 PROGRAMMING .................................................................................................6 411701 061308 Page 3

Resumen del contenido incluido en la página 4

ADJUSTMENTS & PROGRAMMING PROGRAMMING THE BREWER The programming of the brewer is divided into two levels. Brewing adjustments are in Level 1. Service func- tions are accessed in Level 2. The following function screens are in order of appearance. Each screen will have instructions on how to access, and the procedures to program the various functions of the brewer. IMPORTANT PROGRAMMING NOTES - READ CAREFULLY - To exit the programming mode at any time, press and hold "Hidden" switch located

Resumen del contenido incluido en la página 5

PROGRAM FUNCTIONS MAIN SCREEN HIDDEN SWITCH Press until display reads "BREW LOCKOUT" Press/hold to exit program SMALL BREW L LL L BR BRE E Step backwards through screens BREW LOCKOUT: NEXT BREW LOCKOUT ? Prevents brewing if the water temperature is less than NO DONE YES the "SET READY" temperature. To access this function screen press and hold the hidden switch. Release when the display reads: "BREW LOCKOUT". The YES or NO should be fl ashing. Select YES to prevent brewing if the water

Resumen del contenido incluido en la página 6

PROGRAM FUNCTIONS BREW TYPE (A/B) (Tea/Coffee) BREW TYPE A Tea setting provides half the "purge" pressure as coffee at the end of brew TEA DONE COFFEE cycle. BREW OZ. (A/B) (1-16) BREW OZ A: 8.0 Adjust brew volume. (-) DONE (+) BREW METER (A/B) (1-5) BREW METER A: 2 Simplifi ed pulse brew adjustment. 1=Preinfusion. 2-5=pulse brew, - + 2 being the shortest pulse brew cycle, 5 the longest pulse brew cycle. ENTER SERVICE # ENTER

Resumen del contenido incluido en la página 7

PROGRAM FUNCTIONS DRIP TIME (A/B) (OFF/1-50 seconds) DRIP TIME A/B: 15 Time between brew cycle and pod ejection. (-) DONE (+) BREWS TO EMPTY (OFF/15-25) BREWS TO EMPTY Set number of used pods in bin to turn on "EMPTY BIN" message. (-) 25 (+) ENABLE ENERGY SAVER Enabl EnergySavr Choose to have the tank heaters turn off, or reduce the tank temp to (140° F) NO DONE YES or (60° C) once the "SET IDLE TIME" has expired. .5-50.0 hrs. AIR PUMP POWER (1

Resumen del contenido incluido en la página 8

WATER INLET WaterInIet # Activates the water inlet valve for the brew tank, and fl ow meter count. ON NEXT OFF AIR PUMP AIR PUMP Activates the air pump motor for the brew tank. ON NEXT OFF HOT WATER HOT WATER Activates the water inlet solenoid for the hot water tank. ON NEXT OFF VENT VALVE VENT VALVE Activates the vent solenoid for the hot water tank. ON NEXT OFF WATER PUMP WATER PUMP N/A ON NEXT OFF HOT WATER AIR PUMP HotWaterAir PUMP Activ

Resumen del contenido incluido en la página 9

411701 061308 Page 9