Resumen del contenido incluido en la página 1
Vermont Castings Gas Patio Fire
INSTALLER / CONSUMER
SAFETY INFORMATION
PLEASE READ THIS MANUAL
BEFORE INSTALLING AND
USING APPLIANCE
IMPORTANT: Installation of natu-
ral gas should be completed by a
Gas Patio Fire
qualified installer, service agency
or gas supplier.
Models: GPFMN, GPFMP
WARNING: If the information in
this manual is not followed ex-
actly, a fire or explosion may
result causing property damage,
personal injury or loss of life.
FOR YOUR SAFETY
• Installation and service must be
Resumen del contenido incluido en la página 2
Vermont Castings Gas Patio Fire General Information Model GPF is a decorative gas log set for outdoor use • Clothing or other flammable materials should not be hung from the appliance, or placed on or near the only. This appliance must not be used for cooking. appliance. IMPORTANT: Read all instructions and warnings • Installation and repair should be done by a qualified carefully before starting installation. Failure to follow service person. The appliance should be inspected these instructions
Resumen del contenido incluido en la página 3
Vermont Castings Gas Patio Fire GPF Dimensions 11³⁄₈" (289mm) 12" (305mm) 8¹⁄₄" Burner (210mm) 5" (127mm) 3¹⁄₄"(83mm) 11¹⁄₂" (292mm) 16¹⁄₄" (413mm) 4237 Fig. 1 Physical dimensions. Burner Assembly Gas Specifications Max. Input Model Fuel Btu/Hr GPFMN Natural Gas 75,000 GPFMP Propane Gas 65,000 Gas Inlet Pressures Flex Line Natural LP (Propane) Minimum Inlet Pressure 5.5” w.c. 11.0” w.c. Maximum Inlet Pressure 14.0”w.c. 14.0” w.c. Valve Natural Gas Hose Propane Regulator/Hose Minimum Clearance t
Resumen del contenido incluido en la página 4
Vermont Castings Gas Patio Fire Assembly and Installation 4. Check tank valve features to ensure it has proper The logs and burner assembly are shipped together. external mating threads. (Tank valve marked: USE 1. Remove the gas log set and burner assembly and WITH TYPE 1) check for damage. DO NOT install damaged compo- 5. Inspect hose shipped with the unit for damage. nents. The logs are fragile - handle with care. Never attempt to use damaged or plugged equip- 2. Place the burner assembly on a
Resumen del contenido incluido en la página 5
Vermont Castings Gas Patio Fire 4. There shall be a minimum clearance of 2 inches Enclosures for LP Gas Supply Systems (50.8mm) between the lower surface of the floor of If you build an enclosure for an LP gas cylinder, follow the LP gas supply cylinder enclosure and the these recommended specifications. You must also ground. follow local codes. 5. The design of the enclosure shall be such that (1) Enclosures for LP gas supply cylinders shall be the LP gas supply cylinder(s) can be connected,
Resumen del contenido incluido en la página 6
Vermont Castings Gas Patio Fire the valve and bracket assembly to the villa using the Two optional bases are available for the Gas Patio Fire. 1/4-20 x 3/8” fasteners and washers removed in Step 2. The Villa and the Chalet are available from your Ver- Reconnect the fuel supply line to the valve and tighten. mont Castings, Majestic Products dealer. You may also Feed the fuel line from the gas supply through the fuel construct your own base from noncombustible materi- line opening in the base. (Fi
Resumen del contenido incluido en la página 7
Vermont Castings Gas Patio Fire Installation of GPF on GPF Burner Assembly Optional Chalet Base The Chalet Base is designed as a decorative enhance- Octagonal Plate ment for use with the Gas Patio Fire. Tools required: 7/16”, 3/4” and 11/16” wrenches, phillips screwdriver. Cast Valve Panel Installation Instructions 1. Remove Chalet Base assembly from shipping carton. Remove two (2) 1/4-20 fasteners and two (2) washers from the cast valve panel, set aside. 2. Remove the four (4) sheet metal scre
Resumen del contenido incluido en la página 8
Vermont Castings Gas Patio Fire 3. Place volcanic rock evenly around and on burner Log C4 pan if you have not already done so. (Fig. 10) 4. Place log C1 on burner, using locator pins and Log C2 Log C1 holes in bottom of log. (Fig. 11) Log C1 Log C3 LG164a Fig. 13 Logs C3 & C4 placement. LG162a Log C5 Fig. 11 Place log C1 on locator pins onburner. Log C4 5. Move around so that flex line is now on your right. Place log C2 with “Y” part of log toward the outside Log C1 of the burner ring. (Fig.
Resumen del contenido incluido en la página 9
Vermont Castings Gas Patio Fire 4. Use the three inside velcro straps to hold the vinyl Optional GPF Cover Assembly cover to the frame. (Fig. 18) 1. Lay all parts on the floor. 5. Turn the cover with the frame over and it is ready to 2. Attach all three frame stands to the top and bottom use. rings using bolts and nuts provided. (Fig. 16) Before using the vinyl cover turn the GPF flame to OFF and wait unit the unit is completely cool. Top Ring When using the optional screen mesh on the GPF, the
Resumen del contenido incluido en la página 10
Vermont Castings Gas Patio Fire Operation Upon completing the gas line connection, a small WARNING: Read and follow the Safety and Lighting amount of air will be in the lines. When first lighting the Instructions page in this manual and on labels on the burner, it will take a few seconds for the lines to purge appliance. IF YOU DO NOT FOLLOW THESE IN- themselves of this air. Once the purging is complete, STRUCTIONS PRECISELY, A FIRE OR EXPLOSION the burner will light and operate as indicated in
Resumen del contenido incluido en la página 11
Vermont Castings Gas Patio Fire Maintenance 1. The appliance should be inspected before initial use and inspected and cleaned at least annually by a qualified field service person. 2. Tampering is DANGEROUS and voids all warran- ties. Any component that is found to be faulty, must be replaced with an approved component. 3. To obtain proper operation, it is imperative that the burner flame characteristics are steady, not lifting or floating. Check the burner flame patterns with Figure 19. LG169 F
Resumen del contenido incluido en la página 12
Vermont Castings Gas Patio Fire 2 4 1 3 ab c 5 6 9 7a,b 8 d f e 4237 Vermont Castings, Majestic Products reserves the right to make changes in design, materials, specifications, prices and discontinue colors and products at any time, without notice. GPF Item / Model Number Part Number 1. Complete Log Set 20004457 1a. Log C1 20004451 1b. Log C2 20004452 1c. Log C3 20004454 1d. Log C4 20004453 1e. Log C5 20004455 1f. Log C6 20004456 2. Burner Assy. 20003733 3. Hose/Regulator Assy. - LP 20004640 4.
Resumen del contenido incluido en la página 13
Vermont Castings Gas Patio Fire Accessories The following accessories for these appliances are available from your local Vermont Castings, Majestic Products distributor. Each accessory comes with a separate installation instructions for the particular appliance. Be sure to read each instruction thoroughly before installing. Description Model Number Patio Fire Optional Screen Kit PFOSK Villa Patio Fire (Urn) Base PFCBVMB Chalet Patio Fire (Octagonal) Base PFCBCMB CAUTION: This appliance is a high
Resumen del contenido incluido en la página 14
Vermont Castings Gas Patio Fire 14
Resumen del contenido incluido en la página 15
Vermont Castings Gas Patio Fire LIMITED WARRANTY & EXTENDED LIFE TIME PROTECTION For Vermont Castings Gas Appliance Products* BASIC WARRANTY GARANTIE DE BASE: Vermont Castings, Majestic Products (aux présentes nommée la "Société") The Vermont Castings Majestic Products company (hereinafter referred to collectively as the “Company”) warrants that your new Vermont Castings Gas garantit votre nouveau foyer au gaz Vermont Castings contre tous défauts de fabrication et de matières premières pour une
Resumen del contenido incluido en la página 16
Vermont Castings Gas Patio Fire Vermont Castings, Majestic Products 410 Admiral Blvd. • Mississauga, Ontario, Canada L5T 2N6 • 905-670-7777 www.majesticproducts.com • www.vermontcastings.com 16
