Resumen del contenido incluido en la página 1
GZ Owner’s Manual
BILLY GOAT GRAZER
Owner's Manual
GZ401H & GZ451S
Accessories
8" HEAVY DUTY
DRIVE BELT ENGINE BRUSH DRIVE
REPLACEMENT
PULLEY PULLEY
BRUSH
OEM quality Original Original Original
replacement wire Equipment Belt Equipment Equipment
brush. for replacement. Pulley Pulley
for replacement. for replacement.
P/N 600172 P/N 610420 P/N 610417 P/N 610403
Part No 610428 Form No F022508A
1
Resumen del contenido incluido en la página 2
GZ Owner’s Manual ABOUT THIS MANUAL ® THANK YOU for purchasing a BILLY GOAT Grazer. Your new machine has been carefully designed and manufactured to provide years of reliable and productive service. This manual provides complete operating and maintenance instructions that will help to maintain your machine in top running order. Read this manual carefully before assembling, operating, or servicing your equipment. CONTENTS
Resumen del contenido incluido en la página 3
GZ Owner’s Manual SERIAL PLATE DATA Record the model number, serial number, date of purchase, and where purchased. Purchase Date: Purchased From: Specifications GZ401H GZ451S Engine: HP 4.0 (2.98 kW) 4.5 (3.36 kW) Engine: Model GX120T1QA2 EX130D50031 Engine: Type HONDA OHV SUBARU OHV Engine: Fuel Capacity 2.1 qt. (2.0 L) 3.0 qt (2.9 L) Engine: Oil Capacity 0.63 qt. (0.6 L) 0.63 qt. (0
Resumen del contenido incluido en la página 4
GZ Owner’s Manual GENERAL SAFETY INSTRUCTIONS and SYMBOLS The safety symbols shown below are used throughout this manual. You should become familiar with them before assembling, operating, or servicing this equipment. This symbol indicates important information that will prevent injury to yourself or others. This symbol indicates ear protection is recommended when operating this equipment. This symbol indicates eye protection is recommended when operating this equipment.
Resumen del contenido incluido en la página 5
GZ Owner’s Manual DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended. DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling. DO NOT store gasoline near an open flame. DO NOT remove gas cap while engine is running. DO NOT start or operate engine if strong odor of gasoline is present. DO NOT start or operate engine if gasoline is spilled. Move equipme
Resumen del contenido incluido en la página 6
GZ Owner’s Manual INTENDED USE INTENDED USE: This machine is designed for cleaning and removing vegetation and debris from cracks in asphalt pavement. Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn brush, loose hardware, loose engine or lodged foreign objects. (See trouble shooting section on page 11). INSTRUCTION LABELS ® The labels shown below were installed on your BILLY GOAT Grazer. If
Resumen del contenido incluido en la página 7
GZ Owner’s Manual PACKING CHECKLIST Your Billy Goat is shipped from the factory in one carton, completely assembled except for the upper handle assembly, lower handles, handle brace, brush lift rod, and brush. READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box. PUT OIL IN ENGINE BEFORE STARTING PARTS BAG & LITERATURE ASSY Warranty card P/N- 400972, Owner’s Manual P/N-610428. Parts Bag Checklist Boxing Parts
Resumen del contenido incluido en la página 8
GZ Owner’s Manual OPERATION Like all mechanical tools, reasonable care must be used when operating machine. Inspect machine work area and machine before operating. Make sure that all operators of this equipment are trained in general machine use and safety. PUT OIL IN ENGINE BEFORE STARTING Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or worn brush, loose hardware, loose engine
Resumen del contenido incluido en la página 9
GZ Owner’s Manual OPERATING HINTS: A side-to-side sweeping motion is the quickest way to remove surface vegetation from crevices, even if deeper crevice cleaning is desired. After removing surface vegetation, the crevice will be more visible for a deeper cleaning. Power Brush Safety Requirements Warning – In normal power brushing operations, the material being removed such as burrs, scale, dirt, weld slat, or other residue, will fly off the brush with considerable force
Resumen del contenido incluido en la página 10
GZ Owner’s Manual MAINTENANCE PERIODIC MAINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every Use (daily) Every 5 hrs or (daily) Every 25 Hours Inspect for loose, worn or damaged parts. Check for excessive vibration. Inspect belt for wear. Engine (See Engine Manual) Lubricate front wheels and rear wheels. Grease brush arm mechanism. CHANGING BRUSH 1. Wait for engine to cool and disconnect spark plug
Resumen del contenido incluido en la página 11
GZ Owner’s Manual Troubleshooting Problem Possible Cause Solution Engine will not start. Stop switch of. Throttle in off position. Engine Check stop switches, throttle, choke not in full choke position. Out of gasoline. Bad position and gasoline. Connect spark or old gasoline. Spark plug wire disconnected. plug wire. Clean or replace air cleaner. Dirty air cleaner. Or contact a qualified service person. Abnormal vibration. Loose or out of balance brush or loose engine. Replace
Resumen del contenido incluido en la página 12
GZ Owner’s Manual PARTS DRAWING GZ Part No 610428 Form No F022508A 12
Resumen del contenido incluido en la página 13
GZ Owner’s Manual PARTS LIST item PARTS GZ401H QTY GZ451S QTY no. LIST Part No. Part No. 1 Bushing Pivot Frame 360183 2 360183 2 2 Label Hot Engine 400268 1 400268 1 3 Grip Handle 1" X 13" 400570 2 400570 2 4 Screw Self Tap 1/4-20 X 5/8 Type F 890359 5 890359 5 5 Label Danger 600117 1 600117 1 6 Brush 8" Wire Heavy Duty 600172 1 600172 1 7 Caster 5" Dia. X 2" 610101 1 610
Resumen del contenido incluido en la página 14
GZ Owner’s Manual MAINTENANCE RECORD Date Service Performed Part No 610428 Form No F022508A 14
Resumen del contenido incluido en la página 15
GZ Owner’s Manual BRUSH CUTTER FORCE BLOWER AERATOR If you liked this product please feel free to view our full line of quality lawn care, renovation, and debris removal products at www.billygoat.com DL VACUUM MULTI VACUUM POWER RAKE Part No 610428 Form No F022508A 15
Resumen del contenido incluido en la página 16
GZ Owner’s Manual Part No 610428 Form No F022508A 16
