Manual de instrucciones de Vulcan-Hart AGM36

Manual de instrucciones del aparato Vulcan-Hart AGM36

Aparato: Vulcan-Hart AGM36
Categoría: Plancha de cocina
Fabricante: Vulcan-Hart
Tamaño: 1.62 MB
Fecha de añadido: 11/20/2014
Número de páginas: 48
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato Vulcan-Hart AGM36. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con Vulcan-Hart AGM36.

Para tu comodidad

Si ver los manuales de instrucción de Vulcan-Hart AGM36 directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual Vulcan-Hart AGM36 en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de Vulcan-Hart AGM36 a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
Vulcan-Hart AGM36 Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 48 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de Vulcan-Hart AGM36, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para Vulcan-Hart AGM36. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

INSTALLATION & OPERATION MANUAL
HEAVY DUTY GAS GRIDDLES






MODELS

924RX

936RX
948RX
960RX
972RX


948RX




MSA24 ASA24
MSA36 ASA36
MSA48 ASA48
MSA60 ASA60
MSA72 ASA72

MSA48





AGM24
AGM36
AGM48
AGM60
AGM72

AGM48
ITW Food Equipment Group, LLC RETAIN THIS MANUAL FOR FUTURE USE
3600 North Point Blvd.
Baltimore, MD 21222 FORM F-38315 (rev. 08-10)

Resumen del contenido incluido en la página 2

IMPORTANT FOR YOUR SAFETY THIS MANUAL HAS BEEN PREPARED FOR PERSONNEL QUALIFIED TO INSTALL GAS EQUIPMENT, WHO SHOULD PERFORM THE INITIAL FIELD START-UP AND ADJUSTMENTS OF THE EQUIPMENT COVERED BY THIS MANUAL. POST IN A PROMINENT LOCATION THE INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE SMELL OF GAS IS DETECTED. THIS INFORMATION CAN BE OBTAINED FROM THE LOCAL GAS SUPPLIER. IMPORTANT IN THE EVENT A GAS ODOR IS DETECTED, SHUT DOWN UNITS AT MAIN SHUTOFF VALVE AND CONTACT THE LOCA

Resumen del contenido incluido en la página 3

TABLE OF CONTENTS GENERAL…………………………………………………………………………………………...…...… 4 Specifications……………………………………………………………………………………......... 4 INSTALLATION……………………………………………………………………………………………. 4 Unpacking………………………………………………………………………………………………. 4 Location…………………………………………………………………………………………………. 4 Installation Codes and Standards……………………………………………………………………. 5 Griddle Mounted On Stands with Casters…………………………………………………………… 5 Flue Connections………………………………………………………………………………………. 6

Resumen del contenido incluido en la página 4

INSTALLATION, OPERATION AND CARE OF HEAVY DUTY GAS GRIDDLES GENERAL Heavy Duty Gas Griddles are produced with quality workmanship and materials. Proper installation, usage and maintenance of your griddle will result in many years of satisfactory performance. Thoroughly read this entire manual and carefully follow all of the instructions provided BTU/hr Input Model Number of Burners Rating 924RX/MSA24/ASA24/AGM24 2 54,000 936RX/MSA36/ASA36/AGM36 3 81,000 948RX/MSA48/A

Resumen del contenido incluido en la página 5

Do not permit air to blow directly at the griddle. Avoid open windows next to the griddle wherever possible. Avoid wall-type fans which create air cross-currents within the room. This griddle is Design Certified for installation on a non-combustible counter with 4” legs, or combustible floor with 25” high stand. INSTALLATION CLEARANCES COMBUSTIBLE CONSTRUCTION NON-COMBUSTIBLE CONSTRUCTION Back: 6” 0” Right 6” 0” Left Side 6” 0” INSTALLATION CODES AND STANDARDS The griddle must be in

Resumen del contenido incluido en la página 6

If disconnection of the restraint is necessary, turn off the gas supply before disconnecting. Reconnect the restraint prior to turning the gas supply on and returning the griddle to its installation position. Casters are only supplied on a griddle stand. If the griddle is moved for any reason the griddle should be re-leveled (see LEVELING in this manual). FLUE CONNECTIONS Do not obstruct the flow of flue gases from the flue, located at the rear of the griddle. It is recommended that flu

Resumen del contenido incluido en la página 7

GAS PRESSURE REGULATOR INSTALLATION A gas pressure regulator is supplied with the griddle and must be installed. Install the regulator as close to the griddle on the gas supply line as possible. Make sure that the arrow on the underside of the regulator is oriented in the direction of gas flow to the griddle (Fig. 2) and the regulator is positioned with the vent plug and adjustment screw upright (Fig. 3). Check and set the gas pressure after the regulator is installed. The pressure sh

Resumen del contenido incluido en la página 8

OPERATION The griddle and its parts are hot. Use care when operating, cleaning or servicing the griddle. BEFORE FIRST USE Remove all packing material and protective plastic from the surfaces of the unit. Before leaving the factory the griddle is coated with vegetable oil as a rust inhibitor. Remove this film when the griddle plate is being cleaned prior to its first cooking use. Heat the griddle to 200-300°F to loosen and melt the coating, then clean the surface by adding water or

Resumen del contenido incluido en la página 9

This model features an electric ignition system that is controlled by a momentary power switch. The power switch turns the electric ignition system off and on only and will only supply power to the igniters when held down in the ON position. The burners and pilots will continue to work with power switch in the OFF position until the gas supply to the unit is cut off or the griddle gas shut-off valve is turned to the OFF position (Fig. 6). In the event of a failure of the electronic ignitio

Resumen del contenido incluido en la página 10

CONTROLS – MSA AND ASA MODELS pilot adjustment screw pilot and burner sight holes thermostat knob Fig. 7 pilot safety valve push button This model features a standing pilot that must be manually lit with an outside ignition source (such as a lit taper, etc). The pilot is monitored by a thermocouple and pilot safety valve. If the pilot goes out, the safety valve will shut-off the gas supply to the pilot and main burners. There is

Resumen del contenido incluido en la página 11

CONTROLS – AGM MODELS burner and pilot sight holes burner control knob Fig. 8 pilot adjustment screw The model is equipped with standing pilots. Gas will flow from the pilots as soon as the main gas supply to the unit is turned on. The pilots are lit with the use of an outside ignition source (such as a lit taper, etc). There is one pilot for every two burners except on the 36” and 60” models. The 36” and 60” models have an odd number of main bu

Resumen del contenido incluido en la página 12

PILOT LIGHTING PROCEDURE – 900RX MODELS 1. Turn the griddle shut-off valve to the OFF position (See Fig.6 on page 9). Wait 5 minutes to allow any gas that may have accumulated in the burner compartment to escape. 2. Turn the griddle shut-off valve to the ON position (See Fig. 5 on page 9). 3. Push and hold the power switch in the ON position. The switch will illuminate and you will hear a “clicking” sound. 4. While continuing to hold the power s

Resumen del contenido incluido en la página 13

PILOT LIGHTING PROCEDURE- MSA AND ASA MODELS 1. Turn the main gas shut-off valve to the OFF position. Wait 5 minutes to allow any gas that may have accumulated in the burner compartment to escape. 2. Turn the main gas shut-off valve ON. 3. Depress and hold the safety valve button while lighting the corresponding pilot. You will have to reach under the front of the unit to light with an outside ignition source(such as a lit taper, etc.) while viewing

Resumen del contenido incluido en la página 14

PILOT LIGHTING PROCEDURE – AGM MODELS 1. Turn the main gas shut-off valve and all burner control knobs to the OFF position. Wait 5 minutes to allow any gas that may have accumulated in the burner compartment to escape. 2. Turn the main gas shut-off valve ON. 3. While viewing through the pilot sight hole, you will have to reach under the front of the unit and through the pilot cutout to ignite the pilots with an outside ignition source(such as a lit taper, et

Resumen del contenido incluido en la página 15

USING THE GRIDDLE To preheat, turn the burners on about 20-25 minutes before cooking. A uniform and systematic approach to loading the griddle will produce the most consistent product results. The griddle plate is steel, but the surface is relatively soft and can be scored or dented by careless use of a spatula or scraper. Be careful not to dent, scratch, or gouge the plate surface. Do not try to knock off loose food that may be on the spatula by tapping the corner or the edge of the

Resumen del contenido incluido en la página 16

CLEANING THE GRIDDLE Empty the grease drawer as needed throughout the day and regularly clean at least once daily. Clean the griddle regularly. A clean griddle always looks better, lasts longer and performs better. To produce evenly cooked, perfectly browned griddle products keep the griddle plate clean and free of carbonized grease. Carbonized grease on the surface hinders the transfer of heat from the griddle surface to the food, resulting in spotty browning and loss of cooking effici

Resumen del contenido incluido en la página 17

ADJUSTMENTS CALIBRATION-900RX AND MSA MODELS 1. Each thermostat controls a 12” zone of the griddle. Using a Surface Probe temperature measurement device, observe the temperatures at the center points of the cooking zones. These points are located by starting 6” from the side splash (left or right) and every 12” across the width of the griddle, with all points located 12” back from the front edge of the griddle plate. NOTE: Use of infrared thermometers is not recommended. These de

Resumen del contenido incluido en la página 18

LEVELING The griddle must be level (side-to-side and front-to-back) during operation to ensure proper performance. Improper leveling can result in uneven temperature distribution, cold spots, and possibly damage electrical components. 1. Place a level on the griddle. 2. Adjust legs by turning the bullet feet at the bottom of each leg. Using pliers or a crescent wrench, turn the feet counter-clockwise to increase height, and clockwise to decrease height until leveling is achieved. Do not e

Resumen del contenido incluido en la página 19

SHUTDOWN OF GRIDDLE – MSA AND ASA MODELS 1. Turn thermostats to the OFF position to cut off burners. 2. The pilots will remain lit and monitored by the safety valve as long as the main gas supply is on. SHUTDOWN OF GRIDDLE WITH STANDING PILOT SYSTEM – AGM MODELS 1. Turn burner control knobs to the OFF position to cut off burners. 2. The pilots will remain lit as long as the main gas supply is on. EXTENDED SHUTDOWN – ALL MODELS 1. Turn the gri

Resumen del contenido incluido en la página 20

MAINTENANCE The griddle and its parts are hot. Use care when operating, cleaning or servicing the griddle. LUBRICATION All valves must be checked and lubricated periodically. Check with your service agency for details. VENT Daily, when the griddle is cool, check the flue and clear any obstructions. SERVICE AND PARTS INFORMATION Contact the Service Agency in your area to obtain service and parts information. For a complete listing of Service


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 Vulcan-Hart AGM48 Manual de instrucciones Plancha de cocina 1
2 Vulcan-Hart AGM60 Manual de instrucciones Plancha de cocina 0
3 Vulcan-Hart AGM72 Manual de instrucciones Plancha de cocina 0
4 Vulcan-Hart E48L Manual de instrucciones Plancha de cocina 0
5 Vulcan-Hart E36L Manual de instrucciones Plancha de cocina 1
6 Vulcan-Hart E24L Manual de instrucciones Plancha de cocina 4
7 Vulcan-Hart E60L Manual de instrucciones Plancha de cocina 0
8 Vulcan-Hart MGG24 Manual de instrucciones Plancha de cocina 15
9 Vulcan-Hart ML-135309-924RX Manual de instrucciones Plancha de cocina 0
10 Vulcan-Hart ML-135310-936RX Manual de instrucciones Plancha de cocina 3
11 Vulcan-Hart ML-135311-948RX Manual de instrucciones Plancha de cocina 0
12 Vulcan-Hart ML-135312-960RX Manual de instrucciones Plancha de cocina 0
13 Vulcan-Hart ML-135313-972RX Manual de instrucciones Plancha de cocina 0
14 Vulcan-Hart ML-135339-00024 Manual de instrucciones Plancha de cocina 0
15 Vulcan-Hart ML-135341-00048 Manual de instrucciones Plancha de cocina 0
16 Anetsberger Brothers A24X48GC Manual de instrucciones Plancha de cocina 1
17 APW Wyott 1848 Manual de instrucciones Plancha de cocina 1
18 APW Wyott EGD-1824 Manual de instrucciones Plancha de cocina 2
19 APW Wyott GGM-36H Manual de instrucciones Plancha de cocina 3
20 APW Wyott 2472 Manual de instrucciones Plancha de cocina 1