Manual de instrucciones de AMX HDDs in MMS Servers

Resumen del contenido incluido en la página 1

Installation Guide
Replacing HDDs in MMS Servers
Overview
The AMX line of MAX-MMS servers support hot-swappable hard disk drives (HDDs),
accessible behind the removable faceplate, on the front panel. Typically a new HDD
will be required only if an existing one has failed. Only HDDs provided by AMX can be
used as replacements in MMS servers, and in order to replace a HDD in an MMS
server, the drive must be installed and authenticated according to the steps outlined in
this document.
• The MM

Resumen del contenido incluido en la página 2

1. Remove the faceplate from the front panel of the server. 2. Remove the damaged HDD. Each HDD is mounted in a tray that slides in and out of the server. To remove the drive/tray assembly (FIG. 4): a. Push the tab on the front of the drive tray to the right to unlock the hinged front panel. Flip the hinged panel out and use it as a handle to gently pull the drive/tray assembly out of its slot. b. Remove the drive from the drive tray. The drive is secured to the tray with four screws on th