Manual de instrucciones de NEC VERSA BAY III

Resumen del contenido incluido en la página 1

®
NEC Versa LXi
VersaBay III DVD-ROM Drive
Congratulations on purchasing the NEC VersaBay III 6X DVD-ROM drive! The VersaBay III
DVD-ROM drive features the latest in DVD-ROM technology. It is fully compatible with
Kodak Multisession Photo CDs™ and standard audio CDs. You can use your drive to load and
start programs from compact discs or to play audio CDs while you work or relax. With
®
Windows 95 and Windows 98, you can also play full-length CD-i movies. Additionally, with
the NEC SoftDVD Play

Resumen del contenido incluido en la página 2

Removing a Device from the VersaBay III Use the following steps to remove a device from the VersaBay III. 1. Save your files. 2. Either shut down Windows and power off the NEC Versa, or use warm or hot swapping, which is available with the NEC VersaBay III Swapping Utility. The Swapping Utility is provided on the Application and Driver CD that ships with the system. 3. Close the LCD panel and locate the VersaBay III on the front of your system. Locating the NEC VersaBay III A - VersaBay III 4. T

Resumen del contenido incluido en la página 3

Installing the NEC VersaBay III DVD-ROM Drive Use the following steps to install the NEC VersaBay III DVD-ROM drive in the VersaBay III. 1. Save your files. 2. Shut down Windows and power off the NEC Versa. 3. Close the LCD panel and locate the VersaBay III on your system. For the location of the VersaBay III, see the previous section, “Removing a Device from the VersaBay III.” 4. If there is a VersaBay III device in the VersaBay III, refer to the instructions in the previous section to remove t

Resumen del contenido incluido en la página 4

Note For Windows 95 systems, this NEC SoftDVD Player Setup program installs DirectX Media, Internet Explorer 5.0, and DVD Player (this sequence is required). The total installation requires 50 MB. For Windows 98 systems, the Setup program installs DVD Player. The installation requires 2 MB. 1. Insert the NEC SoftDVD Player CD in the DVD-ROM drive or CD-ROM drive. 2. If you have auto-insert notification enabled, the installation program should launch automatically. If you do not have auto-inser

Resumen del contenido incluido en la página 5

Uninstalling the NEC SoftDVD Player For a Windows 95 system, each component that was installed with the NEC SoftDVD Player has one or more uninstall entries in the Add/Remove Programs window: ! for DirectX Media: — Microsoft Windows Media Player 5.2 (if IE5.0 was not yet installed) — Microsoft Windows Media Player 6.1 (if IE5.0 was installed) ! for Internet Explorer 5.0: — Microsoft Internet Explorer 5 and Internet Tools — Microsoft Outlook Express 5 ! for DVD Player: DVD Player For a Windows 98

Resumen del contenido incluido en la página 6

Diagnosing Incorrect Power Management Settings If your system goes into a timeout during a movie, one of the following conditions may occur when you bring the system out of the timeout. ! If you are playing a movie on your television set, the system might go into ‘Simultaneous mode’ (in which the movie displays on the television set and your computer’s LCD panel). ! The movie might restart from the beginning. ! The audio might cut out. ! The system might hang. See the following sections for inst

Resumen del contenido incluido en la página 7

Specifications NEC VersaBay III DVD-ROM drive safety specifications follow and are standard unless stated otherwise. ! Voltage +5 Vdc +5% ripple voltage (mV peak to peak) 50 maximum ! Safety Agency Approvals UL 1950 Second Edition CSA 22.2 no. 950 IEC Pub 950/EN 60950 SS-EN60950 ! Laser Safety 21 CFR Subchapter J as a Class 1 laser device NEC Versa LXi VersaBay III DVD-ROM Drive 7

Resumen del contenido incluido en la página 8

NEC Versa LXi VersaBay III DVD-ROM Drive 819-200645-000 01/2000 !"#$%&''()*%'''! 8 NEC Versa LXi VersaBay III DVD-ROM Drive