Manual de instrucciones de APC Smart Slot AP9620

Resumen del contenido incluido en la página 1

TM
Legacy Communications SmartSlot Card
(AP9620) — Installation and Start-up Guide
Warning: The Legacy Communications
SmartSlot Card must only be used in a
UPS that has an RJ-45 connector used
for serial communications. These units
RJ-45 connector
also have plastic tabs extending from the
SmartSlot.
Contents of Package

Smart Slot
Legacy Communications SmartSlot Card Serial Cable
Note: For USB operation, use the USB cable supplied with the UPS or a standard USB 2.0
compliant A-B cable.

Resumen del contenido incluido en la página 2

UPS Operations with SmartSlot card. The table documents how UPS devices operate with the card. UPS: UPS operational issue Smart Serial: DB-9F smart signaling interface Types of Interface Simple: Simple Signal interface via DB-9F USB: USB-B port on the card. INTER COMMAND HISTORIC OPERATION WITH LEGACY COMMUNICATIONS -FACE OR FUNCTION OPERATION SMARTSLOT CARD INSTALLED 1 Simple Remote On Not always supported. Some UPS devices Remote On is enabled when AC utility power is on OR allowed starting