Resumen del contenido incluido en la página 1
USER GUIDE
2-PORT USB 3.0 SUPERSPEED PCI EXPRESS CARD
Model: 29055
1
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS Introduction ........................................................................................................................................................................ 2 Features .............................................................................................................................................................................. 3 System Requirements .......................................................................................
Resumen del contenido incluido en la página 3
INTRODUCTION Thank you for purchasing the 2-Port USB 3.0 SuperSpeed PCI Express Card. The 2-Port USB 3.0 SuperSpeed PCI Express Card adds SuperSpeed USB capabilities to your computer. Simply install this card into an available PCI slot on your computer to add two USB 3.0 SuperSpeed ports. SuperSpeed USB supports transfer rates of up to 5 Gbps- up to 10 times faster than USB 2.0. The 2-Port USB 3.0 SuperSpeed PCI Express Card is ideal for quickly transferring large amounts of data from
Resumen del contenido incluido en la página 4
FEATURES Adds two USB 3.0 A-Male ports to a computer Connects internally via the PCI-e connector 5 Gbps signaling rate- 10X faster than USB 2.0 Backwards compatible with USB 2.0 Improved power efficiency over USB 2.0 Ideal for large data transfers from external hard drives, real-time video cameras, and other data intensive devices 3
Resumen del contenido incluido en la página 5
SYSTEM REQUIREMENTS Operating System: Windows 7, XP, or Vista™ 4
Resumen del contenido incluido en la página 6
PACKAGE CONTENTS 2-Port USB 3.0 SuperSpeed PCI Express Card Driver CD User Guide 5
Resumen del contenido incluido en la página 7
DEVICE OVERVIEW USB 3.0 Ports 6
Resumen del contenido incluido en la página 8
DRIVER INSTALLATION Before you install the device in your computer, you will need to install the necessary driver for proper operation. Please follow the procedure below. For Windows XP, Vista, Windows 7 Note: The following setup is an example shown using a Windows XP operating system. Some screenshots may vary slightly depending on your operating system. The setup wizard is designed to step you through each part of the driver installation process successfully. Step 1 Insert
Resumen del contenido incluido en la página 9
DRIVER INSTALLATION Step 2 After reading the End-User License Agreement, please select “I accept the terms in the License Agreement” and click Next. Step 3 Please click Browse to choose the destination folder, and then click Next. 8
Resumen del contenido incluido en la página 10
DRIVER INSTALLATION Step 4 Click Install to begin driver installation. The driver installation may take a few minutes. You may also get a software installation Windows security pop-up during this time. Click Continue Anyway when it appears to complete the installation. 9
Resumen del contenido incluido en la página 11
DRIVER INSTALLATION Step 5 When the installation has completed, click Finish to exit the setup wizard. 10
Resumen del contenido incluido en la página 12
DEVICE INSTALLATION Step 1 Turn off your computer and remove the cover/panel to expose the PCI slot. Step 2 Plug the 2-Port USB 3.0 Card into the PCI slot on the computer. Step 3 Replace the cover/panel and turn on your computer. When your computer starts up, a Found New Hardware Wizard will appear. Note: The following setup is an example shown using a Windows XP operating system. Some screenshots may vary slightly depending on your operating system. The setup wizard is des
Resumen del contenido incluido en la página 13
DEVICE INSTALLATION Step 4 When the Found New Hardware Wizard appears, select Yes, this time only, and click Next. Step 5 Choose Install the software automatically and click Next. The Windows security pop-up may appear during this process. Click Continue Anyway to continue with the installation. 12
Resumen del contenido incluido en la página 14
DEVICE INSTALLATION Step 6 Click Finish to complete the installation and exit the wizard. Step 7 The Found New Hardware Wizard will appear again. Repeat steps 4-6 for second USB 3.0 port installation. 13
Resumen del contenido incluido en la página 15
VERIFY DEVICE INSTALLATION After you have completed the driver and device installation, you can go to the Device Manager to verify the product is installed and recognized properly. Windows XP Windows Vista/Windows 7 14
Resumen del contenido incluido en la página 16
TECHNICAL SPECIFICATIONS Product No. 29055 Complies USB Rev. Ver. 3.0 Revision 2.0; PCI Bus Power PCI Express Base Management Interface Specification Specification: Revision 1.2 Connectors USB 3.0 Type A x2 (Downstream) Low-speed (1.5Mbps)/ Full-speed (12Mbps)/ Data Speed Support High-speed (480Mbps)/ Super- speed (5Gbps) Control/ Bulk/ Date Transfer Type Interrupt/ Support Isochoronous Power to Ports 500 mA (max.) Product Weig
Resumen del contenido incluido en la página 17
CABLES TO GO™ ONE YEAR WARRANTY At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 1-800-506-9606 or www.cablestogo.com. Cables To Go 3555 Kettering B
Resumen del contenido incluido en la página 18
IMPORTANT SAFETY INFORMATION ! Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this manual for power level of the unit. ! Liquid: If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit. Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the product. ! In case of a storm, it
Resumen del contenido incluido en la página 19
REGULATORY COMPLIANCE FCC Conditions This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received. Including interference that may cause undesired operation. CE This equipment is in compliance with the requirements of the following regulations: EN 55 022: CLASS B 18
Resumen del contenido incluido en la página 20
19
