Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
CL800BT MANUAL Safety Precautions Avoid long time expose to the direct light or heat. Faults may occur if kept in extreme of temperatures. May become damaged if dropped or knocked. Problems may occur if exposed to humid and/or dusty conditions. Do not use if power cable or plug are damaged. Use only dedicated cable/adapter. Do not disassemble. Do not look directly at the light source, as this can cause damage to the eye. 2
Resumen del contenido incluido en la página 3
CL800BT MANUAL Regulatory Information FCC compliance Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 o
Resumen del contenido incluido en la página 4
CL800BT MANUAL - Redirect or reposition the receiving antenna - Increase the separation between the equipment and receiver - Connect the equipment to a socket on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC WARNING: This equipment may generate or use radio- frequency energy. Changes or modifications to this equipment may cause harmful interference, unless such modifications are expressly a
Resumen del contenido incluido en la página 5
CL800BT MANUAL Laser Safety: Environmental Notice This product does not any materials specified harmful to the human body. At the end of this product’s service life, please separate with the life waste and discharge or go to the Celluon service center for environmental protection. 5
Resumen del contenido incluido en la página 6
CL800BT MANUAL Battery Information Battery service life: 220 minutes continuous use (max) Capacity: 830mAh (max) @ 3.7V Charging the Battery Use the adapter supplied for connection to the power supply. The battery will now start charging. Charging time: 150 min Caution - Use of any other adapter may cause the battery to explode. - After purchasing the product, charge the battery before use. - Charging time is dependent on ambient temperature i.e. it may be longer or shorter in
Resumen del contenido incluido en la página 7
CL800BT MANUAL Table Contents 1. FEATURES...................................................................................9 2. COMPONENTS..........................................................................10 3. PARTS AND THEIR FUNCTIONS .............................................11 3.1 FRONT..................................................................................11 3.2 REAR....................................................................................12 3.3
Resumen del contenido incluido en la página 8
CL800BT MANUAL 5.2 PALM OS............................................................................36 5.2.1 System Requirements .................................................36 5.2.2 Installation/Upgrading/Uninstalling...............................36 5.2.4 PK Settings..................................................................44 5.2.5 PK Tutorial...................................................................49 5.2.6 Shortcut Icon Keys.................................
Resumen del contenido incluido en la página 9
CL800BT MANUAL 1. Features Uses normal QWERTY keyboard layout. Compact size (convenient to carry). Includes function and shortcut icon keys. Robust and durable, uses optical technologies Bluetooth and serial port interface connections. Rapid entry keys. Economical, uses an integrated, rechargeable lithium battery. Compatible with Pocket PC, Palm OS and Windows. 9
Resumen del contenido incluido en la página 10
CL800BT MANUAL 2. Components Case Installation CD Laserkey Quick Install Guide Adapter Serial cable is optional. (refer to http://www.celluon.de.) CDs: - CL800BT Manual - Palm Driver Installation File - Pocket PC 2003 Driver (Widcomm Bluetooth Stack) Installation File) - Pocket PC 2003 Driver (Microsoft Bluetooth Stack) Installation File) 10
Resumen del contenido incluido en la página 11
CL800BT MANUAL 3. Parts and their Functions 3.1 Front Pattern Projector Sensor Module Infra Red Light Source Projector: projects the keyboard image. Infra Red Light Source: supplies the light source to allow the Sensor Module to recognize key strokes. Sensor Module: recognizes key strokes and transmits them to the processing device. 11
Resumen del contenido incluido en la página 12
CL800BT MANUAL 3.2 Rear Power Switch Comm. & Power Ports POWER UP / DOWN ON / OFF Switch Communication & Power Ports Serial Port RC232C Cable Power Port 1A @ 5V adaptor Only use the cable / adapter supplied. 12
Resumen del contenido incluido en la página 13
CL800BT MANUAL 3.3 Top Communication & Battery Power Status LED Status Battery Status LED o Charging Red o Fully Charged Green o Battery Power Low Orange o (Power off within 5 minutes.) Communication & Power Status LED o Bluetooth Mode Pairing : Blue flashing Link: Blue o Serial Mode LED Green 13
Resumen del contenido incluido en la página 14
CL800BT MANUAL * What is Bluetooth? Standard wireless communication between wireless communication devices using low power and over short distances. Note: When you want to exit from using Pocket PC and CL800BT with Bluetooth communication setting, exit by using Pocket PC own keyboard. (Due to operating error, it may reset Pocket PC). 4. How to Operate 4.1 Installation 1. Install software as described in “Manual 5”. 2. Turn power on. 3. Connect device to computer via cabl
Resumen del contenido incluido en la página 15
CL800BT MANUAL 4.2 In Bluetooth Mode 1. Install software as described in “Manual 5”. 2. Turn power on. 3. Set up Bluetooth environment as described in “Manual 5”. 4. Use laser keyboard. 5. How to install, remove and use software 5.1 Pocket PC 5.1.1 System Requirements 1. Microsoft Windows 2000/XP operating system. 2. Microsoft ActiveSync 3.6 or above. 3. Pocket PC based on Microsoft Windows Mobile 2003, with Bluetooth (Widcomm or Microsoft). 5.1.2 Installation/ Upgrading/ Unin
Resumen del contenido incluido en la página 16
CL800BT MANUAL 1. Installation 1) Connect PC to Pocket PC via ActiveSync. 2) Insert installation CD into the CD-ROM drive of your PC to start the installation program. 3) Follow installation program instructions. 2. Upgrading Download and install a new driver from http://www.celluon.de. 3. Uninstalling 1) Select Today Settings System Remove Programs as shown in Figure 1. 16
Resumen del contenido incluido en la página 17
CL800BT MANUAL Figure 1. Uninstalling the Driver 2) Choose Projection Keyboard and click Remove, as shown in Figure 2. Follow the on-screen instructions. Figure 2. Uninstalling the Driver 17
Resumen del contenido incluido en la página 18
CL800BT MANUAL 5.1.3 Connection Method To connect a Pocket PC to the Projection Keyboard follow the instructions below. 1. Turn on power to Pocket PC and Projection Keyboard. Note: Verify that sufficient battery power is supplied to the Projection Keyboard device 2. Run the program required to enter the keyboard as shown in Figure 3 (e.g. Note). Figure 3. Running the Program 18
Resumen del contenido incluido en la página 19
CL800BT MANUAL 3. Select Projection Keyboard from the options, as shown in Figure 4. Figure 4. Selecting a Device 19
Resumen del contenido incluido en la página 20
CL800BT MANUAL 4. When the Bluetooth Browser is open, choose CL800BT, as shown in Figure 5. Figure 5. Selecting a Bluetooth Device 20
