Resumen del contenido incluido en la página 3
Safety Precautions Attention, Consult accompanying documents Dangerous Voltage, Risk of electric shock To reduce the risk of electric shock, Do not remove the back cover. No-user serviceable parts inside, Refer to qualified service Personnel. FCC Information CE Certification FCC (U.S.Federal Communications Commission) This device complies with the This equipment has been tested and found requirements of the MDD directive to comply with the limits for a Class A digital 93/42/EEC "Medical
Resumen del contenido incluido en la página 4
Follow the instructions below for safety use of the color LCD monitor. -Read this user’s manual and properly use the unit. -You must agree that Kodak is not liable for any damage caused by any third party’s or your negligence of following the instructions of this user’s manual and misuse except those specified responsibilities for compensation accepted by law. ●Symbols -This user’s manual contains various symbols to Person could be at risk of severe guide users to properly use the p
Resumen del contenido incluido en la página 5
●Do not put the unit in such place where ●Do not use the attached AC adapter to other devices (models with attached AC it is subject to direct sunlight or near adapter). any heating device. It may lead to generation of fever and/or The cabinet and/or components may be fire. Also, do not use any other AC adapter to this unit. damaged, which may cause Caution generation of fever and ignition. ●During a long-hour use, take a break 10 to 15 minutes every one hour for your
Resumen del contenido incluido en la página 6
Notes ●Even if the unit is properly used, it may have an effect on radio and/or TV reception upon the condition of electric wave. If it is the case, give caution to the followings. 1) Ensure enough space between the unit and radio and/or TV. 2) Connect the unit and radio and/or TV to separate outlets. ●Color LCD monitor may have tiny spots and unevenness according to the displaying conditions, but they are not any sign of failure. ●LCD panel is produced with high-definition technolo
Resumen del contenido incluido en la página 7
Auxiliaries Confirm the auxiliaries listed below are included. □ AC adapter 1 □ USB cable 1 □ Power supply cord (3P wall type) 1 □ User’s Manual (this manual) 1 □ DVI-DVI cable 1 □ Communication cable 1 NOTES ＊ We recommend you to keep t
Resumen del contenido incluido en la página 8
Features ●Use of a 20.8-inch (53cm) QXGA ultra-high-definition color LCD panel A large screen size and clear image is obtained by using a 20.8-inch (diagonal 53cm) QXGA (2048 x 1536 ) ultra-high-definition color LCD panel. Note To display the maximum resolution on DV3MC, a graphics card that can display 2048 x 1536 or 1536 x 2048 is necessary. ●High-intensity, high contrast The 3 million pixels for displaying various medical images can be displayed at "high-resolution,"
Resumen del contenido incluido en la página 9
How to Operate 1. Names and Functions of Each Part Operating Section � � ① Power switch This turns the power of the color LCD monitor ON and OFF. ② Power indicator No. LED Status Power Status Color LCD Monitor Status 1 OFF Power is OFF 2 OFF The brightness stabilizing circuit is ON and ON the brightness is stable 3 The brightness stabilizing circuit is ON and Green lamp ON the brightness is being adjusted is lit 4 Orange lamp is lit ON Power saving mode -
Resumen del contenido incluido en la página 10
Connection Section Portrait (shorter side at the top) � � � � � � � Left side view ③ USB upstream port Connect this port to the upstream connector from the computer. For the connection, use a USB cable 2 meters or shorter in length. ④ USB downstream port x 2 Connect the ports to USB devices (a MOUSE, etc.) with a maximum current consumption of no greater than 100mA per port. Connect the color sensor when you operate color calibration. ⑤ DC power connector (DC IN 12V
Resumen del contenido incluido en la página 11
2. Adjusting the Display Angle The screen angle can be arranged by up to 70 degrees either to the right or left, bent down by up to 3 degrees and bent up by up to 17 degrees. As indicated in the drawing below, the adjustment is con- ducted by holding the color LCD display in both hands and slowly moving it. 17 degrees 70 degrees 70 degrees 3 degrees Caution Be careful not to catch your fingers when adjusting the angle holding the bottom of the LCD panel and turning the panel. - 11 -
Resumen del contenido incluido en la página 12
3. Rotating the LCD Panel When setting the color LCD monitor to horizontal display (landscape orientation), lift the LCD panel to the top of the tilt stand as shown in the figure below and rotate it by 90 degrees. Procedure ① Tilt the LCD panel upward. (Perform this procedure before sliding the panel upward.) ② Lift the LCD panel to the top (The tilt stand will slide about 60mm.). ③ Rotate the LCD panel by 90 degrees. ④ Replace the LCD panel to the bottom while in the horizontal position (la
Resumen del contenido incluido en la página 13
Connection Method 1. Confirm that the computer is turned off. 2. Connect the computer’s DVI digital video output connector and the LCD monitor's "SIGNAL" with the provided cable. When connecting the cable, do not forget to tighten the screw of the cable. 3. Connect the DC output connector of the attached AC adapter to the LCD monitor's "DC IN 12V" and the power plug to an inlet. 4. Turn on the LCD monitor and computer. Confirm that the monitor displays images. Example of Connection
Resumen del contenido incluido en la página 14
Handling the cable cover 1. Removing the cable cover Lifting the hook at the top of the cover, slowly remove the cable cover and expose the cable holders. Hook Cable cover 2. Installing the cable cover Secure cables to the cable holders on the back of the stand. (Refer to the figure on the right) Install the cable cover. It is free to arrange cable settings according to environment. Caution ●Do not give signal cables or the power cord a strong pull. ������������ ●A strong pu
Resumen del contenido incluido en la página 15
Antitheft security device slot This product has loaded an antitheft security device slot compliant with MicroSaver Security System of Kensington on the back of the color LCD monitor. MicroSaver security System can be purchased at PC supply shops. Antitheft security device slot * Kensington is a registered brand of Kensington. - 15 -
Resumen del contenido incluido en la página 16
Reference *1 DDC This unit has loaded a function compliant with DDC-2B, a VESA standard. This function reads into the set data written in the color LCD monitor internal device in advance on startup of Windows 95/98/Me/2000 or Windows XP and sets the detailed information of the color LCD monitor in the system file in order to achieve Plug&Play. Data reading from the color LCD monitor is done through a video signal cable, which needs to be connected when Windows 95/98/Me/2000 or Windows
Resumen del contenido incluido en la página 17
Assignment of Connector Pins Pin # Signal 24-pin DVI-D Connector (female) 1 T.M.D.S. Data2- 2 T.M.D.S. Data2+ 3 T.M.D.S. Data2/4 Shield 4 T.M.D.S. Data4- 5 T.M.D.S. Data4+ 6 DDC Clock 7 DDC Data DIGITAL Signal Connector 8 NC 9 T.M.D.S. Data1- 10 T.M.D.S. Data1+ 11 T.M.D.S. Data1/3 Shield 12 T.M.D.S. Data3- 13 T.M.D.S. Data3+ 14 +5V Power 15 Ground 16 Hot Plug Detect 17 T.M.D.S. Data0- 18 T.M.D.S. Data0+ 19 T.M.D.S. Data0/5 Shield 20 T.M.D.S. Data5- 21 T.M.D.S. Data5+ 22 T.M.D.S. Clock Shield 23
Resumen del contenido incluido en la página 18
Failure Diagnosis Check the followings before requesting repair. Countermeasure Symptom Verification Power doesn't turn on! a: Is the power cord a: Connect the power cord (see (POWER indicator doesn't connected? Pg.12). light!). b: Is the power switch ON? b: Turn the power switch on. a: Is the signal cable properly a: Properly connect the The screen is not displayed! connected? appropriate signal cable (see b: Is the POWER indicator Pg. 12). orange? b: Disengage the po
Resumen del contenido incluido en la página 19
Cleaning Cleaning the Cabinet and the Color LCD Monitor ●When cleaning, remove the AC adapter from the color LCD monitor and outlet for safety. ●Lightly wipe off dirt on the cabinet and LCD panel surface with a hard-wrung soft cloth soaked in a neutral cleaning solution. Follow its instruction when using a disposable cloth. ●Do not use thinner, benzine, alcohol or such on the cabinet that is made of plastic. These can damage the cabinet, alter its quality and cause the paint to peel
Resumen del contenido incluido en la página 20
Specifications Product name : Color LCD Monitor Model : DV3MC Items Specifications LCD display device 53 cm (20.8-inch) Color TFT Normally Black Pixel pitch Horizontal 0.207 mm × Vertical 0.207 mm Display area Horizontal 318.0 mm × Vertical 423.9 mm Pixel 1536 × 2048 pixels Display gradation 16.77million (8 bit each) Backlight 12 cold cathode fluorescent lamps (CCFL) Optical characteristics Horizontal ......... ± 85 deg (contrast ratio 10:1) of the LCD Vertical ............. ± 85
Resumen del contenido incluido en la página 1
Kodak DirectView
3MP Color Display
Model# DV3MC
CAT 802 6635
Contents
Thank you for purchasing our Color LCD Monitor.
1.Safety Precautions .................................3
◆ Carefully read this User's Manual and use the
2.Auxiliaries ...............................................7
product properly. Before using it, also read
3.Features .................................................8
"Safety Precautions."
4.How to Operate ......................................9
◆ Keep t
Resumen del contenido incluido en la página 2
