Resumen del contenido incluido en la página 1
LT2013s Wide Flat Panel
Monitor User’s Guide
Resumen del contenido incluido en la página 2
Product numbers 60AB-AAR1-WW First Edition (June 2013) © Copyright Lenovo 2013. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure. LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered pursuant a General Services Administration "GSA"
Resumen del contenido incluido en la página 3
Contents Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii General Safety guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Chapter 1. Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Shipping cont
Resumen del contenido incluido en la página 4
Safety information General Safety guidelines For tips to help you use your computer safely, go to: http://www.lenovo.com/safety Before installing this product, read the Safety Information. íí í iii
Resumen del contenido incluido en la página 5
Chapter 1. Getting started This User’s Guide contains detailed information on the your Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: • Setup Poster • Reference and Driver CD • Flat Panel Monitor •Power Cord • Analog Interface Cable Notice for use To set up your monitor, please see the illustrations below. Note: Do not touch the monitor within the screen area. The
Resumen del contenido incluido en la página 6
Product overview This section will provide information on adjusting monitor positions , setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. -5° 22° Monitor controls Your monitor has controls on the front which are used to adjust the display. For information on how to use these controls, please see "Adjusting your monitor image"on page 2-3. Chapter 1. 1-2
Resumen del contenido incluido en la página 7
Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower position). Chapter 1. 1-3
Resumen del contenido incluido en la página 8
Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety information located on page iii before carrying out this procedure. 1. Power off your computer and all attached devices, and unplug the computer power cord. 2. Connect the cables according to below icon indication. Chapter 1. 1-4
Resumen del contenido incluido en la página 9
3. Connect one end of the analog signal cable to the monitor D-SUB connector and the other end to the computer. Chapter 1. 1-5
Resumen del contenido incluido en la página 10
4. Insert the power cord into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G0.75mm2) shall be used. Alternative a flexible
Resumen del contenido incluido en la página 11
To install the monitor driver, insert the Reference and Driver CD, click Install driver, and 6. follow the on-screen instructions. To optimize your monitor image, press the Automatic Image Setup key. 7. Automatic image setup requires that the monitor is warmed up for at least 15 minutes. This is not required for normal operation. Note: If automatic image setup does not establish the image that you prefer, perform manual image setup. See "Manual image setup"on page 3-4. Registering your option T
Resumen del contenido incluido en la página 12
Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer. For more detailed inf
Resumen del contenido incluido en la página 13
• Use the monitor brightness, contrast controls, if equipped to optimize the image on your screen to meet your visual preferences. • Keep your monitor screen clean so you can focus on the screen’s contents. Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to periodically look away from your monitor screen and focus on a far object to allow your eye muscles to relax. If you have questions on eye fatigue or visual discomfort, consult a vision care specialist
Resumen del contenido incluido en la página 14
Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1. Direct access controls Icon Control Description Press and hold for 10 seconds to enable or disable DDC-CI the DDC-CI function Exit Exit from menu Image Setup Activates automatic image adjustment Brightness Direct access to Brightness adjustment Menu Enter men
Resumen del contenido incluido en la página 15
Using the On-Screen Display (OSD) controls To adjust the settings, the user controls can be viewed through the OSD. To use the controls: 1. Press to open the main OSD menu. 2. Use or to move among the icons. Select an icon and press to access that function. If there is a sub-menu, you can move between options using or , then press to select that function. Use or to make adjustments. Press to save. 3. Press to move backwards through the sub-menus and exit from the OSD. 4. Pr
Resumen del contenido incluido en la página 16
Table 2-2. OSD functions Controls and OSD Icon on Main Adjustments Menu Submenu Description (Analog) Adjusts overall screen brightness Brightness Brightness/ Adjusts difference between Contrast light and dark areas Contrast Moves image left or right. Horizontal Position Image Position Moves image up or down. Vertical Position Optimizes image (size, position, phase and clock). Automatic Image Setup Manually optimizes image. See "Manual image setup"on page 3-4. Manual •Clock •Phase • Save
Resumen del contenido incluido en la página 17
Table 2-2. OSD functions Controls and OSD Icon on Main Adjustments Menu Submenu Description (Analog) Shows resolution, refresh rate, and product details. Note: This screen does not allow any changes to Information Options the settings. Changes languages of menu. Note: The language chosen only affects the Menu Language language of the OSD. It has no effect on any software running on the computer. Adjusts menu location. Default Menu Position Default returns the menu position to the default
Resumen del contenido incluido en la página 18
Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flick
Resumen del contenido incluido en la página 19
Understanding power management Power management is invoked when the comp uter recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day. Table 2-4. Power indicator Restoring State Power Indicator Screen Operation Compliance On Green Normal Standby/Suspen
Resumen del contenido incluido en la página 20
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor. • Use solvents or abrasives. • Use flammable cleaning materials to clean your monitor or any other electrical equipment. • Touch the screen area of your monitor with sharp or abrasive items. This type of contact may cause permanent damage to your screen. • Use any cleaner which contains an anti-static solution or similar additives. Th
