Resumen del contenido incluido en la página 1
USER'S MANUAL
"
22
DiamondtronUWG
RDF225WG
20" Viewable Image Size
www.mitsubishidisplay.com
RDF225WGcover 1 5/4/04, 11:41 AM
Resumen del contenido incluido en la página 2
Index Warning .................................................................................................................... 1 Features .................................................................................................................. 2 Contents ................................................................................................................. 3 Quick Start ........................................................................................................
Resumen del contenido incluido en la página 3
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK • DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS IN
Resumen del contenido incluido en la página 4
Contents Your new RDF225WG monitor box* should contain the following: • RDF225WG monitor with tilt/swivel base • Power Cord • Video Signal Cable (D-Sub to D-Sub) • User’s Manual Video Signal Cable Power Cord User’s Manual * Remember to save your original box and packing material to transport or ship the monitor. 2 RDF225WGmanual051804.p65 2 5/18/04, 10:03 AM
Resumen del contenido incluido en la página 5
Quick Start To attach the monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. If necessary, install the display card into your system. For more information, refer to the display card manual. 3. For the PC: Connect the 15-pin mini D-SUB of the captive signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For the Mac: Connect the Macintosh cable adapter (not included) to the monitor connector on the Macintosh (F
Resumen del contenido incluido en la página 6
Quick Start –continued Figure C.1 Power Button Power Indicator Figure D.1 4 RDF225WGmanual051804.p65 4 5/18/04, 10:03 AM
Resumen del contenido incluido en la página 7
Controls OSD (On-Screen Display) control buttons on the front of the monitor function as follows: Main Menu Sub-Menu EXIT Exits the OSD menu. Exits to the OSD controls main menu. Note : Deactivates the OSD menu and activates the OSD menu when the OSD is turned off. CONTROL Moves the highlighted Moves the highlighted area / area left/right to select left/right to select one of the one of the sub-menus. controls. Note : When the OSD menu is off, it acts as a Hot key for Brightness. CONTROL Has
Resumen del contenido incluido en la página 8
Controls –continued Color Control System Color presets selects the desired color setting. The bar is replaced by the color setting choice. Each color setting is adjusted at the factory to the stated Kelvin. If a setting is adjusted, the name of the setting will change from Kelvin to Custom except sRGB mode. Red, Green, Blue: AccuColor Control System decreases or increases the monitor's red, green or blue color guns depending upon which is selected. The change in color will appear on screen an
Resumen del contenido incluido en la página 9
Controls –continued Corner Purity Control: Eliminates picture impurities that may result from the earth’s magnetic field. While in the sub-menus (TL: Top Left, TR: Top Right, BL: Bottom Left, BR: Bottom Right or L/R: Left/Right, use the –/+ control buttons to fine tune the Corner Purity corrections. NOTE: We recommend that you perform Corner Purity correction while running a typical application such as a spreadsheet or text document. Tools 2 Language: OSD controls menus are available in 6 langua
Resumen del contenido incluido en la página 10
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MITSUBISHI COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabinet sl
Resumen del contenido incluido en la página 11
Recommended Use –continued CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 16 inches and no further away than 24 inches from your eyes. The optimal distance is 20 inches. • Rest your eyes periodi
Resumen del contenido incluido en la página 12
Specifications Monitor RDF225WG Notes Specifications Monitor Picture Tube Diagonal: 22 inch/550mm 90° deflection, 0.24 mm grille pitch, Viewable Image Size: 20 inch/508mm wide color gamut phosphor, aperture Radius: 50,000 mm grille CRT, G-WARAS coating 2 Luminanace (peak) 100cd/m @ 9300K 2 80cd/m @ 6500K 2 70cd/m @ 5000K Color Coordinates Red: x=0.650, y=0.321 Green: x=0.208, y=0.690 – long phosphor persistance time Blue: x=0.151, y=0.070 Color Gamut 97.6% of Adobe RGB 93.3% of NTSC Input Signa
Resumen del contenido incluido en la página 13
Features Wide color gamut 22-inch CRT monitor that supports Adobe RGB. Designed for use in high-end graphics applications including Digital Still Camera and imaging, provides the highest level of color matching to other output devices. Flat Aperture Grille CRT: Delivers an unparalleled viewing experience with a virtually flat image, eliminating distortion and reducing glare so that what you see on-screen is what you get on your printed output. The striped phosphor alignment of the CRT delivers s
Resumen del contenido incluido en la página 14
Troubleshooting No picture • Display card should be completely seated in its slot. • Power Button and computer power switch should be in the ON position. • Signal cable should be completely connected to display card/computer. • Check connector for bent or pushed-in pins. Image is scrolling or unstable • Signal cable should be completely attached to the computer. • Check pin assignments and signal timings of the monitor and your display card with respect to recommended timings and pin assignments
Resumen del contenido incluido en la página 15
References NEC-Mitsubishi Monitor Customer Service & Support Customer Service and Technical Support: (800) 632-4662 Fax: (800) 695-3044 Parts and Accessories/Macintosh Cable Adapter: (888) NEC-MITS [888-632-6487] Customer Service Policies & Processes: http://www.necmitsubishi.com/ css/ServicePolicies/ServicePolicies.htm Online Technical Support Knowledge Base: http://www.necmitsubishi.com/ css/knowledgebase.cfm Customer Service & Technical Support Email: http://www.necmitsubishi.com/ css/tech
Resumen del contenido incluido en la página 16
Limited Warranty NEC-Mitsubishi Electronics Display of America, Inc. (hereinafter “NMD-A”) warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NMD-A’s sole option) any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase. Spare parts are warranted for ninety (90) days. Replacement parts or unit may be new or refurbished and wil
Resumen del contenido incluido en la página 17
AVERTISSEMENT AFIN D’ÉVITER TOUT RISQUE D’INCENDIE OU D’ÉLECTROCUTION, NE PAS EXPOSER CET APPAREIL À LA PLUIE OU À L’HUMIDITÉ. NE PAS UTILISER LA FICHE D’ALIMENTATION POLARISÉE AVEC UNE PRISE DE CORDON DE RALLONGE OU AUTRE PRISE SAUF SI LES BROCHES PEUVENT ÊTRE ENTIÈREMENT INTRODUITES. NE PAS OUVRIR LE BOÎTIER, LEQUEL CONTIENT DES COMPOSANTS À HAUTE TENSION. CONFIER TOUS TRAVAUX À DU PERSONNEL TECHNIQUE QUALIFIÉ. ATTENTION RISQUE DE DÉCHARGE ÉLECTRIQUE • NE PAS OUVRIR ATTENTION : POUR ÉVITER TOU
Resumen del contenido incluido en la página 18
Contenu La boîte* de votre nouveau moniteur RDF335WG contient : • Moniteur RDF225WG avec base pivotante/inclinable • Câble pour le signal vidéo • Cordon d’alimentation • Manuel de l’utilisateur Câble pour le signal vidéo Cordon d’alimentation Manuel de l’utilisateur * Ne pas oublier de conserver la boîte et le matériel d’emballage d’origine pour transporter ou expédier le moniteur. 16 RDF225WGmanual051804.p65 16 5/18/04, 10:03 AM
Resumen del contenido incluido en la página 19
Mise en marche rapide Pour raccorder le moniteur au système, suivre les directives ci-après : 1. Mettre l'ordinateur hors tension. 2. Si nécessaire, installer la carte vidéo dans le système. Pour plus d'informations, se reporter au guide de l’utilisateur de la carte vidéo. 3. Pour le PC : Connecter la mini-fiche D-SUB à 15 broches du câble de signal captif au connecteur de la carte vidéo du système (Figure A.1). Serrer toutes les vis. Pour le Mac : Connecter l'adaptateur de câble Macintosh (non
Resumen del contenido incluido en la página 20
Mise en march rapide (suite) Figure C.1 Commutateur d’alimentation Power Button Power Indicator Voyant d’alimentation Figure D.1 18 RDF225WGmanual051804.p65 18 5/18/04, 10:03 AM
