Resumen del contenido incluido en la página 1
ENGLISH
ESPAÑOL
Canon Inkjet Office All-In-One
Equipo multifunción para oficina Canon Inkjet
series
Getting Started
Read Me First
Guía de inicio
Léame en primer lugar
Make sure to read this manual before using the machine. Please keep it in hand for future reference.
Asegúrese de leer este manual antes de usar el equipo. Consérvelo a mano para utilizarlo como referencia en el futuro.
Resumen del contenido incluido en la página 2
■ Contents ■ Symbols Used in This ■ Contenido ■ Símbolos utilizados en este Document documento 1 Preparation P.4 1 Preparación P.4 Prohibited actions. Acciones prohibidas. 2 Install the FINE Cartridges P.10 2 Instalación de los cartuchos FINE (FINE Cartridges) P.10 3 Load Paper P.14 Instructions including important Instrucciones que incluyen 3 Carga del papel P.14 4 Set Up for Fax Reception P.15 information. información importante. 4 Configuración del equipo para la 5 Select Co
Resumen del contenido incluido en la página 3
■ Machine Installation Flow Network Connection Conexión de red USB Connection ■ Flujo de instalación Conexión USB Wireless Connection del equipo Using from Additional Computers Conexión inalámbrica (when the machine is already connected to the network and you want to add computers from which to use the machine) Machine Preparation Uso desde ordenadores P.3 - 14 Preparación del equipo adicionales (cuando el equipo ya está conectado a la red y se quieren añadir ordenadores desde los cuales
Resumen del contenido incluido en la página 4
On-screen manuals can be viewed on a computer. They are included on the Setup CD-ROM and are installed during the software installation. Some parts of the manual may be displayed in English. For details on opening the on-screen manuals, refer to page 40. Los manuales en pantalla se pueden ver en un ordenador. Se incluyen en el CD-ROM de instalación (Setup CD-ROM) y se instalan durante el proceso de instalación del software. Algunas partes del manual pueden aparecer en inglés. Para obtener inf
Resumen del contenido incluido en la página 5
■ Devices Required for Wireless Connection ■ Dispositivos necesarios para la conexión inalámbrica When using the machine over a wireless connection, a commercial access point or router that supports IEEE802.11n/g/b is required. Cuando utilice el equipo mediante una conexión inalámbrica, se necesita un punto de acceso o un router disponibles en comercios que sean compatibles con IEEE802.11n/g/b. Access point or wireless router Network setup cable Cable de configuración de red The supplied netwo
Resumen del contenido incluido en la página 6
1 2 1 1 3 4 5 6 7 A Make sure all the following items are supplied. • Do not install the machine where an object may fall on it. In 1. FINE cartridges (Color, Black) 5. Manuals addition, do not place any object on the top of the machine. It may fall into the machine when opening covers, resulting in malfunction. 2. Power cord 6. Setup CD-ROM (containing the drivers, • Paper Output Tray (A) automatically opens when printing starts. Do applications and on-screen manuals) 3. Telephone line cable
Resumen del contenido incluido en la página 7
B Do not connect 2 3 the power cord yet. B 3 2 D 1 C A Remove all the protective materials 1. Open the Paper Output Tray (A). and orange tape from the outside of the 2. Make sure the Document Cover (B) is closed, then lift to open the Scanning Unit (Cover) (C). machine. 3. Fix it with the Scanning Unit Support (D). • The tape and protective materials may differ in shape and position from those shown here. Aún no conecte el cable de alimentación. Retire la cinta naranja y todos los 1.
Resumen del contenido incluido en la página 8
4 5 1 F 2 3 E Remove both the orange tape (E) and the protective material (F) 1. Lift the Scanning Unit (Cover) slightly. carefully. 2. Fold the Scanning Unit Support. 3. Close the Scanning Unit (Cover) gently. Retire la cinta naranja (E) y el material protector (F) con cuidado. 1. Levante la unidad de escaneado (cubierta) ligeramente. 2. Pliegue el soporte de la unidad de escaneado. 3. Cierre después la unidad de escaneado (cubierta) con cuidado.
Resumen del contenido incluido en la página 9
1 6 7 I Only when connecting a telephone or an answering machine Sólo al conectar 2 un teléfono o G un contestador automático H Use fax features? Connect one end of supplied telephone line cable (G) to Remove the Cap (I) (1), then connect a telephone or an answering the lower connector labeled “L” on the machine, and then machine with the telephone line cable (2). connect the other end to the telephone jack on the wall (H). Go to . Yes • Do not use a telephone jack line duplexer to con
Resumen del contenido incluido en la página 10
J M K L 8 9 10 Insert the power cord into the connector on the left Press the ON button (J) to turn on the Use the [ or ] button (K) on the Operation Panel to select side of the machine and into the wall outlet firmly. machine. the language for the LCD (Liquid Crystal Display) (L), then press the OK button. • It takes about 5 seconds for the ON button to work after the power cord is plugged in. • Do NOT connect the network setup cable (USB cable) at this stage. • If you want to change the
Resumen del contenido incluido en la página 11
11 When this screen is displayed, proceed to the next step. Cuando aparezca esta pantalla, continúe con el paso siguiente. When it is necessary to turn off the machine Cuando sea necesario desconectar el equipo 1 2 • Before removing the power plug, make sure that all the lamps on the Operation Panel are not lit. Removing the power plug while any of the lamps on the Operation Panel is lit or flashing may cause drying and clogging of the FINE Cartridges, resulting in poor printing. When using t
Resumen del contenido incluido en la página 12
1 2 3 A 2 H G A 2 1 E F D 1. Make sure the Document Cover (A) is closed, then lift to open the Scanning The FINE Cartridge Follow the next Unit (Cover) (D). Holder (H) moves to the procedure to insert the installation position. Black and Color 2. Fix it with the Scanning Unit Support (E). FINE Cartridges into their • When you lift the Scanning Unit (Cover), do not touch the buttons on the Operation Panel (F) corresponding slots If the FINE Cartridge Holder or the LCD (G). May result in
Resumen del contenido incluido en la página 13
4 5 J J I Open the Ink Cartridge Locking Cover on the right side. After removing the Black FINE Cartridge from its box, pull the orange protective tape (J) in the direction of the arrow and remove it carefully. Pinch (I) firmly and pull up the cover. • Handle the FINE Cartridges carefully. Do not drop or apply excessive pressure to them. • Be sure to use the supplied FINE Cartridges. • Be careful not to stain your hands or surrounding work area with ink on the removed protective tape. • Do n
Resumen del contenido incluido en la página 14
6 7 Place the Black FINE Cartridge into the right slot Push down of the Ink Cartridge Locking Cover until it snaps into place. . View the Ink Cartridge Locking Cover straight on and check that it is locked correctly (not at an angle). • Do not knock the FINE Cartridge against the sides of the holder. • Install in a well-lit environment. • Install the Black FINE Cartridge into the right slot , and the Color FINE Cartridge into the left slot . Coloque el cartucho FINE (FINE Cartridg
Resumen del contenido incluido en la página 15
8 9 10 1 2 3 Insert the Color FINE 1. Lift the Scanning Unit (Cover) slightly. Wait for about 1 minute until the LCD changes as shown in the illustration, then Cartridge into the left proceed to the next step. 2. Fold the Scanning Unit Support. FINE Cartridge Holder 3. Close the Scanning Unit (Cover) gently. • Once you have installed the FINE Cartridges, do not remove them unnecessarily. in the same way as the • If an error message is displayed on the LCD, make sure that the FINE Cartrid
Resumen del contenido incluido en la página 16
2 1 2 3 4 D 1 3 C A B Open the Paper Support Move the Paper Guides Load paper in the center Slide the left and right Paper Guides against both (A). (B) to both edges. of the Rear Tray (C). edges of the paper. Make sure that the height of the paper stack does not exceed the line (D). Load paper in portrait orientation with the printing • For details on how to handle paper, refer to "Loading side facing up. Paper" in the on-screen manual: Basic Guide after installation is complete. Abra el s
Resumen del contenido incluido en la página 17
Depending on your needs, select one of the following three modes for receiving Read this section only when using faxes. You can change the receive mode after installation is complete. For details, the fax features. refer to “Setting the Receive Mode” in the on-screen manual: Basic Guide. 4 If not using the fax features, go to En función de sus necesidades, seleccione uno de estos tres modos para la “5 Select Connection Method” on recepción de faxes. Puede cambiar el modo de recepción despu
Resumen del contenido incluido en la página 18
Responses to Calls in Each Mode Respuestas a llamadas en cada modo When a fax call arrives When a voice call arrives Si recibe una llamada de fax Si recibe una llamada de voz While the telephone's ringtone While the telephone's ringtone sounds, pick up the handset. sounds, pick up the handset to When the fax reception answer the call. starts, replace the handset. If an answering machine is Mientras suene el tono de connected, the fax is received llamada del teléfono, descuelgue automatica
Resumen del contenido incluido en la página 19
1 2 3 A B C Press the FAX button (A), then press Use the [ or ] button (C) to select Receive mode Select a receive mode, then press the OK button. the Menu button (B). set., then press the OK button. If the advanced settings screen is displayed Select No, then press the OK button. The selected receive mode is displayed. • For details on the advanced settings on the receive mode, refer to the on- screen manual: Basic Guide after installation is complete. Pulse el botón FAX (A) y, Utilice el bot
Resumen del contenido incluido en la página 20
Intended Use Connection Method Uso previsto Método de conexión 5 • Connect to a computer with a USB cable. Go to “6 Set Up a USB Connection (Software USB Connection • Conectar a un ordenador con un cable USB. Installation)” on page 19. Vaya a “6 Configuración de una conexión USB Conexión USB (instalación del software)” en la página 19. • Connect to computers without using cables. • Use from multiple computers. Wireless Connection • Conectar a ordenadores sin usar cables. Go to “7 Set U
