Resumen del contenido incluido en la página 1
PROline
GAS COOKER
EFG 502
GB
Resumen del contenido incluido en la página 2
2
Resumen del contenido incluido en la página 3
CONTENTS Instructions for the user Instructions for the installer Important Safety Information 4 Safety Advice 15 Description of the appliance 5 Technical Data 15 Technical Features 6 Installation 16 - Positioning 16 Using the appliance 7 - Ventilation 16 - Before using the cooker for the - Location 16 first time 7 - Fitting the adjustable feet 16 - Using the oven 7 - Hints & Tips 8 Gas connections 17 - Cooking with the grill 9 - Using the Hob 10 Conversion to LP gas 17 Maintenance and Cleaning
Resumen del contenido incluido en la página 4
IMPORTANT SAFETY INFORMATION You MUST read these warnings carefully before installing or using the appliance. Installation • Ensure the control knobs are in the ‘OFF’ position when not in use. • This cooker must be installed by qualified • When using other electrical appliances, personnel, according to the manufacturer’s ensure the cable does not come into contact instructions and to the relevant British with the hot surfaces of the cooker. Standards. • Unstable or misshapen pans should not be
Resumen del contenido incluido en la página 5
DESCRIPTION OF THE APPLIANCE Hob 2000W 1000W semi-rapid auxiliary Control panel 155 170 300 190 285 210 270 230 250 Door handle 2 3 Oven door glass 1 4 semi-rapid rapid 2000W 2600W Adjustable feet 1. Front left burner (semi-rapid) 2. Back left burner (semi-rapid) 3. Back right burner (auxiliary) 4. Front right burner (rapid) Control panel Model : EFG 502 150 162 250 175 237 187 225 EFG 502 200 212 OVEN FRONT BACK BACK FRONT THERMOSTAT/ LEFT LEFT RIGHT RIGHT GRILL BURNER BURNER BURNER BURNER CON
Resumen del contenido incluido en la página 6
TECHNICAL FEATURES Free standing Class 1 Hob Pan support Enamelled Front right burner Rapid 2,60 kW Back right burner Auxiliary 1,00 kW Front left burner Semi rapid 2,00 kW Back left burner Semi rapid 2,00 kW Oven Oven power 3,20 kW Grill power 2,50 kW Chromed Oven shelf Accessories Enamelled Grill pan Enamelled Heat deflection shield Height to the hob 880 - 890 mm Dimensions Width 500 mm Depth 600 mm This appliance complies with the following EEC Directives : 90/396 (Gas Appliance Directive) 93
Resumen del contenido incluido en la página 7
USING THE APPLIANCE Before using the cooker for the first time Remove all packaging both inside and outside of the cooker, before using it. Before using for the first time, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal. 1. Remove the oven accessories and ensure all packaging has been removed. 2. Ignite the oven burner (see instructions) and turn the control knob to 250 degrees C . 3. Open a window for ventilation. 4. Allow the
Resumen del contenido incluido en la página 8
Ignition Attention: when turning on the oven and grill burner the oven door has to be opened. • Open the oven door and lift the small flap on the bottom of the oven cavity. • Hold a lit match or taper to the oven burner. • Push and turn the oven thermostat control knob in a anticlockwise direction to the 150 maximum position 250 degrees C. 162 • Hold in the knob for approximately 15 250 175 seconds to allow the flame failure device to 237 187 energise. 225 200 212 • Release the control knob, che
Resumen del contenido incluido en la página 9
Cooking with the grill A Whenever the grill is in use the heat deflection shield must be fitted to prevent the overheating of the control knobs and facia panel. • First of all fit the heat deflection shield "A" • Hold a lighted match or taper to the grill burner. • Push and turn the oven thermostat control knob in a clockwise direction to the grill symbol. • Hold in the knob for approximately 15 seconds to allow the flame failure device to energise. • Release the control knob, check that the bur
Resumen del contenido incluido en la página 10
Using the Hob The Hob Burners The symbol on the knob corresponds to a symbol on the control panel (See description of appliance). Off Maximum level Minimum level Use the maximum position for boiling and the minimum for simmering. Always choose positions between the minimum and maximum, never between maximum and off. Ignition of the burners • Push the corresponding control knob in completely and turn it anti-clockwise to the “large flame” symbol and ignite with a m
Resumen del contenido incluido en la página 11
Correct Selecting the Correct burner Above every control knob there is a symbol for the corresponding burner. For good cooking results, always choose pans, which correctly fit to the diameter of the burner used (see figs). Choose thick, flat bottom pans. We recommend the flame is lowered as soon as the liquid starts boiling. Incorrect The following diameter pans can be used: Power Diameter (mm) Burner (kW) min. max. Rapid 2,60 165 260 Semi-Rapid 2,00 140 220 Auxiliary
Resumen del contenido incluido en la página 12
MAINTENANCE AND CLEANING The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire, especially in the grill pan. Before cleaning, ensure all control knobs are in the OFF position, and the appliance has cooled completely. Cleaning materials Before using any cleaning materials on your locking parts oven, check that they are suitable and that their use is recommended by the manufacturer. Cleaners that contain bleach should NOT be used
Resumen del contenido incluido en la página 13
Oven Cavity The enameled oven cavity is best cleaned whilst the oven is still warm. Wipe the oven with a soft cloth soaked in warm soapy water after each use. From time to time it will be necessary to do a more thorough cleaning, using a proprietary oven cleaner. Hob After every use wipe with a soft cloth well wrung out in warm water to which a little washing up liquid has been added, avoiding any leakage through the holes of the hob. Rinse and dry with a soft cloth. To remove more stubborn stai
Resumen del contenido incluido en la página 14
BEFORE YOU CALL FOR SERVICE If the appliance is not working correctly, please carry out the following checks, before contacting your local Comet Service Centre. Symptoms Solutions 1. No burner ignition Check that: • Gas supply is completely open • The position of gas pipe is right • The burner is not wet • The burner cap and ring have been replaced correctly after cleaning 2. The gas ring burns unevenly Check that: • The main jet is not blocked and the burner ring is clean of food particles • Th
Resumen del contenido incluido en la página 15
INSTRUCTIONS FOR THE INSTALLER SAFETY ADVICE - Installation of flues and ventilation for Important gas appliances of rated input not This appliance is supplied for use on st nd rd exceeding 60 kW (1 , 2 and 3 family NATURAL GAS ONLY and cannot be used gases) – Part 2 Specification for for any other gas without modification. installation of ventilation for gas Conversion for use on other gases must only appliances – BS 5440; be undertaken by a qualified person. For - Gas burning appliances – Part
Resumen del contenido incluido en la página 16
INSTALLATION Positioning Remove all the packaging and install the cooker in a dry well, ventilated room away from curtains, paper, alcohol, petrol etc. (See figure). This appliance is approved to class “1” regarding 610 mm 150 mm overheating of surrounding surfaces. Proline G 1 2 3 4 5 678 It is mandatory to keep 20 mm distance from the adjacent furniture. L.P.G. cookers or ovens MUST NOT be 20 mm 20 mm installed below ground level, i.e. in a basement, or aboard any boat, yacht or other vessel.
Resumen del contenido incluido en la página 17
1 Fitting the adjustable feet Unpack the support brackets with the feet attached. Place a piece of cloth/cardboard onto your floor to prtect both your floor and the cooker. Lay the cooker on its back, fit the support brackets (see fig) using the bolts, washers and nuts supplied and ensure that the nuts are tight. lift the cooker upright onto its feet. Levelling the cooker and fitting the plinth • Unscrew the legs as far as possible (approx. 16mm from fully screwed in). 4 5 • Place the plinth (po
Resumen del contenido incluido en la página 18
Hob burners • Remove the pan support; • Remove the caps and the burner crowns; • Using a No 7 socket spanner unscrew the injectors and replace them with those required for the type of gas in use (see table no. 1). Reassemble the parts following the same procedure in reverse. These burners do not need any primary air regulation. Adjustment of minimum level for the hob burners The burner is correctly adjusted when the flame is stable silent and goes out without any noise. When changing the type o
Resumen del contenido incluido en la página 19
Table no.2 Grill burner To replace the grill injector, follow this procedure: Air adjusting (mm) Gas type • Remove the grill burner after removing the Oven Grill fixing screw. G20 2,5 25,5 • Replace the injector by means of a No 10 G30 3,5 24 socket spanner; G31 3,5 24 • Refit all parts and test. Flame adjustment Oven burner The burner is correctly adjusted when the flame is stable, silent and goes out without any noise. • When the flames are too short, the injector is whistling or the flames ha
Resumen del contenido incluido en la página 20
.
