Résumé du contenu de la page N° 1
21029
2.4 GHz Triple Cordless Handset
Call Waiting Caller ID Phone System
User’s Guide
Résumé du contenu de la page N° 2
Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, p
Résumé du contenu de la page N° 3
The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service. Interference Information This device complies with Part 15 of the
Résumé du contenu de la page N° 4
Table of Contents EQUIPMENT APPROVAL INFORMATION .........2 SCREENING CALLS FROM THE BASE .....17 INTERFERENCE INFORMATION ....................3 MAILBOX INDICATOR .........................17 LICENSING ............................................3 MESSAGES PLAYBACK .......................17 HEARING AID COMPATIBILITY (HAC) .........3 MEMORY FULL .................................18 TABLE OF CONTENTS ..............................4 ERASING MESSAGES .........................18 FCC RF RADIATION EXPOSU
Résumé du contenu de la page N° 5
TELEPHONE OPERATION .........................30 CHANGING RECORDS STORED IN MEMORY 39 CHARGE INDICATOR ...........................30 DELETING RECORDS STORED IN MEMORY .39 MAKING CALLS ................................30 DIALING A NUMBER FROM MEMORY ....39 ANSWERING CALLS ...........................30 CHAIN DIALING FROM MEMORY ..........39 SPEAKERPHONE OPERATION ...................30 CALLER ID (CID) ................................40 ANSWERING A CALL W/SPEAKERPHONE 30 CID ERROR CODES ..............
Résumé du contenu de la page N° 6
FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a mininum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the belt clip
Résumé du contenu de la page N° 7
This telephone has been designed to be simple to use, however, you can reach its full potential more quickly by taking a few minutes to read this Instruction Book. This telephone is a multifunction product for use with Call Waiting and Caller ID services available from your local telephone company. Your Caller ID Call Waiting phone allows you to: • View the name and telephone number of a caller (Call Waiting Caller ID) while you are on the phone. • Identify callers before you answer the pho
Résumé du contenu de la page N° 8
Handset Layout display Speaker format/conf (format/conference button) del (delete button) SPKR (speaker button) cid/vol (caller ID/volume button) skip (button) TALK/END/call back (button) review (button) # pause/ringer play/stop (button) (button) erase button *exit (button) mem (memory button) redial (button) flash/answerer (button) mute/prog page/int (mute/program button) (page/intercom button) 8
Résumé du contenu de la page N° 9
Base Layout LANGUAGE Message counter (button) SPEAKER DAY/CHECK PLAY/STOP 3 MINUTE HOUR (button/indicator) vol (buttons) in use/charging (indicator) memo PAGE (button) (button) answer on/off (button) PLAY/STOP 2 (button/indicator) announce 1 (button) DO NOT DISTURB announce 2 (button) (button) SKIP (button) del (button) Microphone REVIEW (button) PLAY/STOP 1 (button/indicator) Handset Charge Cradle Layout charge indicator 9
Résumé du contenu de la page N° 10
Parts Checklist Make sure your package includes the items shown here. 3 Belt clips 3 Handsets 3 Batteries Base and battery compartment doors Telephone line 2 Handset Charge Cradles AC power adaptor cord Telephone Jack Requirements Wall plate To use this phone, you need an RJ11C (CA11A) type modular phone telephone jack, which might look like the Modular one pictured here, installed in your home. If you don’t telephone have a modular jack, call your local phone company to line jack find
Résumé du contenu de la page N° 11
Installation INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause or receive interference with nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If such interference continues, move the cordless telephone farther away from these appliances. Certain other communications devices may also use the 2.4 GHz frequency for communication, and, if not properly set, these d
Résumé du contenu de la page N° 12
Installing the Handset Battery NOTE: You must connect the handset battery before use. 1. Connect battery pack plug to jack inside compartment on base. BATTERY BLACK WIRE PRESS DOWN FIRMLY RED WIRE NOTE: It is important to maintain the polarity (black and red wires) to the jack inside the compartment as shown in the illustration. To ensure proper battery installation, the connector is keyed and can be inserted only one way. 2. Install compartment cover and snap into place. 3. Place the handset
Résumé du contenu de la page N° 13
Connecting the AC (Electrical) Power 1. On the base, plug one end of the power adaptor cord into the power jack on the back of the base and the other end into an electrical outlet. CAUTION: Use only the ATLINKS USA, Inc. power adaptor 5-2596 that came with this unit. Using other power adaptors may damage the unit. 2. Plug the handset charge cradle into an electrical outlet. NOTE: The in use/charging indicator on the base and the charge indicator on the handset charge cradle turns on to indic
Résumé du contenu de la page N° 14
NOTE: To change to “English”, press the LANGUAGE button again. NOTE: In remote access mode, the system follows the selected language. The voice prompt language cannot be switched remotely. Answering System Setup This section shows you how to set up your answering system to receive incoming calls. Before you begin the set up process, you must turn on the answering system. • Press the answer on/off button to turn the answering system on and off. The message counter indicator lights when the an
Résumé du contenu de la page N° 15
Voice Instruction If you need additional assistance, press the REVIEW button in standby mode and follow the voice instructions. Recording the Outgoing Announcement For best results when recording, you should be about nine inches from the microphone, and eliminate as much background noise as possible. You may record 2 outgoing announcements in the answerer or choose the default for your current outgoing announcement. 1. Make sure the answering system is ON. 2. Press and hold the announce 1 or
Résumé du contenu de la page N° 16
Reviewing and Choosing the Announcement Press and release the announce 1 button to review and select this one as your outgoing announcement. Or, press and release the announce 2 button to review and select this one as your outgoing announcement. Answering System Operation This section discusses the buttons and features on the answering system. Message Counter The message counter gives you a numeric display of how many messages you have. See below for the details. a) Message counter has a numb
Résumé du contenu de la page N° 17
NOTE: While the messages are playing, the message counter will display the messages in the order they were received. NOTE: The maximum recording time for each message is 3 minutes and the total recording time of this unit is 20 minutes. Leaving a Message 1. After the answerer gets the line and plays the outgoing announcement, the caller can enter the mailbox number (1, 2 or 3) during the play of outgoing announcement or within the 2 seconds after the end of outgoing annoucement and then lea
Résumé du contenu de la page N° 18
• Press and release the REVIEW button to restart the current message. • Press and release the REVIEW button twice to go to the previous message. • Press and release the SKIP button to go to the next message. • Press the del button to erase the current message. Memory Full When the answering system memory is full, the system answers after 10 rings. You should erase some messages so the answering system may record new messages. Erasing Messages You may erase messages in the following three ways:
Résumé du contenu de la page N° 19
Leaving a Memo Use the memo feature to leave a message. 1. Press the memo button and it will announce “TO RECORD, PRESS AND HOLD MAILBOX” 2. Press and hold the PLAY/STOP 1, 2, or 3 button. You must hold the button until you finish recording the memo. 3. Begin speaking after it announces “RECORD MESSAGE” . 4. Release the mailbox button when finished. Telephone Setup Programming the Telephone Standby Screen The handset displays the handset number and user name. AM 11:30 RAYMOND HANDSET 1 Prog
Résumé du contenu de la page N° 20
4. Press mute/prog button and ROOM MONITOR EXTENSION? shows in the display. ROOM MONITOR EXTENSION ? 5. Press the handset number of the handset being monitored. NOTE: When this phone system is expanded (up to 4 handsets by purchase of optional Model 21009A handset with recharge cradle), handsets are named HANDSET 1, HANDSET 2, HANDSET 3, and HANDSET 4 respectively. 6. If handset 1 is the room monitoring initiator, the following displays will be shown. ROOM MONITOR ROOM MONITOR HANDSET
