Résumé du contenu de la page N° 1
POWER
ON/OFF
DE
PROTECT EFFECT DISP MODE
L
REC
PLAY
Introduction
Congratulations upon your selection of the QV-200 Liquid Crystal
Liquid Crystal Digital Camera
Digital Camera. The QV-200 comes with its own built-in liquid crystal
color monitor that let’s you instantly view the pictures you take.
QV-200
To get the most out of the QV-200, be sure to carefully read this
Owner’s Manual
manual and follow the instructions contained in it.
If you need help
with your camera,
please call:
1(800)435-7732
Résumé du contenu de la page N° 2
Precautions Liquid Crystal Digital Camera • Never use the unit inside of an air craft or in any other areas where General Precautions its use is prohibited. Doing so can result in an accident. Be sure to observe the following important precautions whenever us- • Physical damage and malfunction of this unit can cause the image ing the QV-200. data stored in its memory to be deleted. Be sure to always keep All references in this manual to “this camera” and “the camera” refer backup copies of data
Résumé du contenu de la page N° 3
/ POWER ONOFF DEL PROTECT EFFECT DISP MODE REC PLAY Unpacking General Guide Getting Acquainted Check to make sure that all of the items shown below are included The following illustrations show the names of each component, but- with your camera. If something is missing, contact your dealer as ton and switch on the camera. soon as possible. Top and Display DISP (Display) button /PROTECT MODE button (Timer/Protect) DEL (Delete) button button Shutter button Soft case [+] (Forward) button Camera EF
Résumé du contenu de la page N° 4
POWER ON/OFF Power Supply Getting Acquainted The camera features a two-way power supply that lets you use either Battery Handling Precautions batteries (AA-size Alkaline or Lithium) or household AC current. Incorrect use or handling of batteries can cause them to leak or burst and seriously damage your camera. Be sure to note the following To load batteries important precautions to avoid problems with batteries. Be sure that camera power is turned off whenever loading or replac- ing batteries. •
Résumé du contenu de la page N° 5
POWER ON/OFF Power Supply Getting Acquainted • Always be sure to use the AD-C60 Using AC Power AC adaptor only. Using any other AC To power the camera from standard AC power, use the optional AC adaptor can cause damage to the adaptor (AD-C60). camera not covered by the warranty. • When unplugging the AC adaptor AC power terminal Caution from the wall socket, be sure to AC adaptor grasp the adaptor (not the cord). • Avoid an undue bending, pulling, and twisting of the AC adaptor's cord, and neve
Résumé du contenu de la page N° 6
/ POWER ONOFF DEL PROTECT EFFECT DISP MODE REC PLAY Recording Images Operation Caution Infrared Light • Never open the battery compartment cover, disconnect the Infrared light generated by a flash or other source can create image AC adaptor from the camera or unplug it from the wall color problems, such as red areas being recorded as green. Such socket while the “WAIT” message is on the LCD. Doing so color problems will show up in the LCD while you are composing the will not only make storage of
Résumé du contenu de la page N° 7
Recording Images Operation Notes Exposure Adjustment • Exposure adjustment is generally expressed in terms of an expo- This camera features an automatic exposure (AE) function that auto- sure adjustment value. The exposure adjustment value is always matically changes the shutter speed in accordance with lighting. In set to zero whenever you turn on the camera. addition, you can also manually adjust the exposure to compensate for backlighting, indirect indoor lighting, dark backgrounds, and other
Résumé du contenu de la page N° 8
Recording Images Operation • Pressing the [+] or [–] button to adjust exposure while an exposure Using the Self-Timer warning indicator is on the LCD causes a +/– exposure value to With the Self-Timer, the shutter is released 10 seconds after you appear. This is an EV value. press the /PROTECT button. 1. Enter the Record Mode. Low Battery Indicator • Set the function switch to the REC position. The low battery indicator ( ) appears in the center of the LCD whenever remaining battery power drops
Résumé du contenu de la page N° 9
Playing Back Images Operation After connecting the camera and TV, use the same procedures as Producing a Multi-Page Display those described under “Displaying Images on the Camera’s LCD” on Four or nine memory pages can be displayed at the same time. This page 31. feature can be used to display multiple memory pages on the cam- era's built-in LCD, or on the screen of a connected TV. Important! • Note that only images already stored in camera memory can be Multi-Page Display (EFFECT Menu) viewed o
Résumé du contenu de la page N° 10
Playing Back Images Operation Notes 4. Press the shutter button. • If the page number is displayed in the upper right corner of the • At this time the image is doubled in size. The portion that screen when you perform a zoom operation, the number is replaced appears on the screen is the center of the image. by a zoom area indicator ( ). This indicator shows you what part of the image is currently enlarged on the display. You can turn the zoom area indicator on and off by pressing the DISP button
Résumé du contenu de la page N° 11
Playing Back Images Operation 9. Press the shutter button to register the selected frame. Rotating an Image • If you selected “No Frame” in step Use the following procedure to rotate an image in 90° increments. 8, skip to step 12 here. Otherwise, proceed with step 10. To rotate an image 1. Enter the Playback Mode. • Slide the function switch to the PLAY position. 2. Use the [+] and [–] buttons to scroll through the images in 10. Use the [+] and [–] buttons to select the color of the frame. memor
Résumé du contenu de la page N° 12
Playing Back Images Operation 6. Use the [+] and [–] buttons to select the filter type. • Each press of [+] and [–] changes to one of the five available filters. 7. Press the shutter button to register the currently selected 1 second 1 second filter. • Auto play continues to loop through the memory pages. This • The filtered image is stored in the memory page immediately means that when it reaches the last page, it starts again following the memory page where the original, unfiltered image is st
Résumé du contenu de la page N° 13
Playing Back Images Operation 5. Display the page you want to protect. 4. Specify all-page protection. • Use [+] and [–] to scroll through the pages until the one you • Use [+] and [–] to select “ALL” and want to protect is displayed. then press the shutter button. 6. Press the shutter button to protect the displayed image. • A protect indicator ( ) appears • A protect indicator ( ) appears in the upper left corner of in the upper left corner of all the display to indicate it is protected. memor
Résumé du contenu de la page N° 14
Deleting Memory Pages Deleting Memory Pages Operation Use the procedures described in this section to delete memory 3. Select “PAGE”. pages. You can delete individual pages, or all the pages currently • Use [+] and [–] to select “PAGE”. stored in memory. • To clear the selection screen and quit this procedure, select the EXIT icon. Warning! The delete operation cannot be undone! 4. Press the shutter button. Before performing any of the procedures described in this section, 5. Use [+] and [–] to
Résumé du contenu de la page N° 15
Resolution Conversion Connecting to Other Devices Deleting Memory Pages Using the Camera with a Connected Device Use the following procedure to convert an image converted in the The camera terminals FINE Mode to a NORMAL Mode image. The following describes which the camera terminal you should use • After you convert a FINE image to a NORMAL image, the FINE for each type of connection. image is automatically deleted. VIDEO OUT – Use this terminal when connecting to the VIDEO IN terminal of a TV,
Résumé du contenu de la page N° 16
Using the Camera with a Connected Device Using the Camera with a Connected Device 4. Use the [+] and [–] buttons to move the pointer to the send icon. Connecting to another CASIO Digital Camera DIGITAL 5. After you make the setting you want, press the shutter button again. You can connect the camera to another CASIO digital camera and • Pressing the shutter button sends the selected image to the other exchange image data between them. Connect the DIGITAL terminals camera. of the two cameras usin
Résumé du contenu de la page N° 17
Troubleshooting Using the Camera with a Connected Device Reference VIDEO Computer (Video Capture) Symptom Probable Cause Action You can use the special video cable that comes with the camera to No power 1. Batteries not loaded 1. Correctly load batter- connect directly to the VIDEO IN terminal of a personal computer correctly. ies (page 13). equipped with video capture capabilities. 2. Dead batteries 2. Replace batteries with new ones (page 13). To transfer camera images to a personal computer
Résumé du contenu de la page N° 18
Reference Troubleshooting Symptom Probable Cause Action Symptom Probable Cause Action Delete opera- 1. All pages are pro- 1. Unprotect the page Pressing MODE There are no convertible tion does not tected. you want to delete does not change images in memory. start when DEL (page 50). the FINE is pressed. 2. Multi-page display 2. Change to a normal- NORMAL Menu. (page 34) or zoom dis- size, 1-page display play (page 36) format. Cannot transfer 1. Sending camera’s 1. Correct the situation data (er
Résumé du contenu de la page N° 19
Specifications Reference Terminals ................... DIGITAL; VIDEO OUT; DC IN 6V General Power Supply ............. Batteries (AA-size Alkaline or lithium batteries X Recording System ...... Digital (JPEG based)/Field recording 4)/AC Adaptor (AD-C60) Signal System ............ NTSC Power consumption ... Approximately 3.9 W Recording Medium ..... Built-in 4MB flash memory Battery Life ................. The battery life reference values given below indi- Number of Memory Pages cate the amount o
