Instruction d'utilisation Insignia NS-DSC10A

Résumé du contenu de la page N° 1

Quick Setup Guide
NS-DSC10A/NS-DSC10B
Congratulations on your purchase Package contents
of a high-quality Insignia product. USB cable
Your Insignia digital camera is Quick Setup Guide
designed for reliable and trouble- 2 AA alkaline batteries
free performance. Use this guide for CD with User Guide
initial setup of your camera. If you Wrist strap
have questions, see your User Guide
for more information.
1

Résumé du contenu de la page N° 2

Getting to know your camera 1 Flash 2 Self-timer lamp 3 Microphone 4 Zoom lens 5 Record mode button 6 Operation lamp 7 LCD screen 8 Zoom buttons 9 Playback mode button 10 OK/DISP button/ 4-way navigation control ( , , , ) 11 Delete button 12 Menu button 13 Speaker 14 Power button 15 Shutter button 16 Strap ring 17 Battery/memory card compartment 18 Tripod socket 19 USB connector Note: The memory card slot is located behind the battery cover, inside the battery compartment. 2

Résumé du contenu de la page N° 3

Installing batteries 1 Open the battery cover by sliding it in the direction indicated by the arrow. 2 Insert two AA batteries with the positive (+) and negative (-) terminals matching the directions indicated inside the battery compartment. 3 Close the battery cover. Inserting a memory card 1 Open the battery cover. 2 Insert an SD or SDHC card with the metallic part facing the back of the camera and the connectors pointing in. 3 Close the battery cover. Note: To remove the card, gently pre

Résumé du contenu de la page N° 4

Power-saving function To save battery power, turn the power saving function ON so that the camera automatically turns off two minutes after the last control has been accessed. You can change the power save setting in the Setup menu. The power save feature will not activate while you are: • Recording or playing video • Erasing or copying fi les • Connecting the camera to a computer with the USB cable Changing the mode You can record images and videos in Record mode. Use Playback mode to

Résumé du contenu de la page N° 5

Using menus Use the four-way control and OK/DISP to make menu selections. To use the Record menu 1 Turn the camera on. If the camera is not in Record mode, press the Quality Fine Record button. Resolution High 2 Press (menu) to display the ISO Auto Record menu. Color Balance Sunny 3 Press up or down arrows to Stabilizer Off select a menu item and left or right arrows to change the setting. 4 Press (menu) or OK/DISP to save settings and close the menu. To use the setup menu 1 Turn

Résumé du contenu de la page N° 6

307 Taking pictures 10M 1 Turn the power on. Set your camera to Record mode by pressing the Record button until the camera icon appears in the upper left of the LCD monitor. 2 Aim the focus area on the subject AUTO that you want to take a photo of. 3 Press the shutter button half-way down to focus the image. The focus area turns green when the subject is in focus; the aperture value, shutter speed and ISO value are displayed. F2.8 1/60100 1/60 If the shutter speed is slow or picture

Résumé du contenu de la page N° 7

00002222::::00003333::::00004444 Recording video clips x4. x5.0 0 1 Turn the power on. 2 Press the Record mode button until the movie icon appears in the upper lefthand corner of the LCD monitor. 3 Focus your camera on the subject that you want to take. 4 Press the Shutter button to start recording. Use the control to zoom in and zoom out an image. Note: When recording videos, audio recording mutes during zoom operation. 5 Press the Shutter button again to stop recording. Note: The ca

Résumé du contenu de la page N° 8

Connecting the camera to a computer with the USB cable 1 Connect the supplied USB cable to the computer’s USB port and turn on the camera. A confi rmation message appears on the LCD screen confi rming that a connection has been made, and then the LCD screen turns off . 2 On Windows computers open My Computer or Windows Explorer. Removable Disk appears in the drive list. On Macintosh computers, a card icon will appear on the desktop. Double-click the icon to access images. 3 Double-cli