Résumé du contenu de la page N° 1
Introduction
Before recording
Settings and
Digital Camera
adjustments
for recording
Digitale Kamera
Caméra numérique
Various
recording
INSTRUCTIONS
methods
KY-F1030
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
Menu screen
settings
Others
Illustration with optional lens attachment.
For Customer Use:
Enter below the Serial No. which is
located on the unit. Retain this
information for future reference.
This instruction book is made from 100%
Model No. KY-F1030
recycled paper.
Serial No.
LWT0016-001A
Résumé du contenu de la page N° 2
IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5. Do not use attachments not recommended by the appliance manufacturer as they may cause hazards. 6. Do not use this appliance near water - for example, near a batht
Résumé du contenu de la page N° 3
13. Follow all warnings and instructions marked on the appliance. 14. Do not overload wall outlets and extension cords as this can result in fire or electric shock. 15. Never push objects of any kind into his appliance through cabinet slots as they mat touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance. 16. Do not attempt to service this appliance yourself as opening or removing covers may expose you to
Résumé du contenu de la page N° 4
JVC Sales Office 1. JVC PROFESSIONAL PRODUCTS (U.K.) LIMITED ULLSWATER HOUSE, KENDAL AVENUE LONDON, W3 0XA, UNITED KINGDOM TEL : 020 8896 6000 2. JVC PROFESSIONAL PRODUCTS GMBH GRÜENER WEG 12, 61169 FRIEDBERG / HESSEN GERMANY TEL : (06031)6050 3. JVC PROFESSIONAL PRODUCTS ITALIA S.p.A. VIA MARIO PANNUNZIO 4, 20156 MILANO, ITALY TEL : (02)38.05.01 4. JVC FRANCE S.A. 1, AVENUE EIFFEL 78422 CARRIERES-SUR-SEINE, CEDEX FRANCE TEL : 33.1.61.04.11.64. 5. JVC ESPAÑA S.A. CTRA GRACIA MANRESA,KM 14 750 ED
Résumé du contenu de la page N° 5
10. JVC DENMARK A/S HELGESHOJ ALLE 30 DK-2630, TASTRUP, DENMARK TEL : (43)509000 11. SPITZER ELECTRONIC AG MUHLEMATTSTRASSE 13, 4104 OBERWIL, SWITZERLAND TEL : 0614051111 12. OY HEDPRO AB LAUTTASAARENTIE 50, FIN-00200 HELSINKI, FINLAND TEL : 35896828244 13. ELECTROINDUSTRIAL HELLAS S.A. 62, PIRAEUS AVE, 183 46 MOSCHATO, ATHENS, GREECE TEL : (01)4832855 14. ORIELA S.A. CAMPO STA. CLARA 160-A, 1100 LISBOA PORTUGAL TEL : 351-1-882-3382 15. FACO HF FAXAFEN 12, P.O.BOX 442, 108 108 REYKAJVIK, ICELAND
Résumé du contenu de la page N° 6
Thank you for purchasing the JVC KY-F1030 The instructions are given in three languages: Digital Camera. English from page E2 to E46 These instructions are for KY-F1030U. German from page G2 to G46 French from page F2 to F46 SAFETY PRECAUTIONS Changes or modifications not approved by JVC could FOR USA AND CANADA void the user’s authority to operate the equipment. CAUTION WARNING: RISK OF ELECTRIC SHOCK TO REDUCE THE RISK OF FIRE OR ELEC- DO NOT OPEN TRIC SHOCK, DO NOT EXPOSE THIS APPLI- ANCE TO
Résumé du contenu de la page N° 7
For Sweden For Denmark VARNING ADVARSELI Explosionsfara vid felaktigt batteribyte. Lithiumbatteri – Eksplosionsfare ved fejlagtig Använd samma batterityp eller en ekvivalent typ håndtering. som rekommenderas av apparattillverkaren. Udskiftning må kun ske med batteri af samme Kassera använt batteri enligt fabrikantens fabrikat og type. instruktion. Lever det brugte batteri tilbage til leverandøren. For Norway For Finland ADVARSEL VAROITUS Paristo voi räjähtää, jos se on virheellisesti Lithiumbatt
Résumé du contenu de la page N° 8
Table of Contents 1. Introduction Features ...........................................................................................................................6 Accessories and attachments ..........................................................................................7 Cautionary notes for the correct usage of this product ....................................................8 Part names and their functions ........................................................................
Résumé du contenu de la page N° 9
6. Others About ALC and EEI operations ......................................................................................44 Specifications .................................................................................................................45 Characters and symbols used in this instruction book CAUTION Cautionary notes concerning operation of the unit MEMO Reference such as restrictions of features, etc. Reference page or item In general, the names of products manufactured by o
Résumé du contenu de la page N° 10
1. Introduction Features ● The KY-F1030 is a digital camera employing a 1/2” CCD with 1.45 million effective pixels. ● Employment of RGB primary color filter CCD for color adjustment close to that of 3-CCD cameras. ● Output of 1360 × 1024-pixel digital/analog video signal possible. ● Built-in DSP for real-time processing of the video signal that is output as a 7.5 frames-per- second Y, Cb, Cr 4:2:2 digital signal enables real-time transfer to personal computer by means of IEEE1394 host adapter.
Résumé du contenu de la page N° 11
Accessories and attachments Power cable (2 m) Remote plug (10-pin) Clamp filter 8-pin cable for connecting Plug for REMOTE terminal For IEEE1394 cable with AC adapter. ( page E12) ( page E18) ( page E18) Wire clamp (5 pcs.) CD-ROM (1 disk) For clamping cables on the rear. Contains special application software “KY-LINK”. * For details, see the “Readme.txt” file on the disc “Enu”. Camera mounting bracket locking screw (3 units) For attaching the mounting bracket on the top surface of the Ins
Résumé du contenu de la page N° 12
1. Introduction (continued) Cautionary notes for the correct usage of this product • Before recording an important event, etc., always check to make sure that this product is working properly. • We are not liable for any missed recordings caused by malfunction of this unit, etc. Phenomena unique to CCD • Smearing and blooming When using CCD to shoot a bright light source, a smearing effect may occur running a white line vertical to the light source. In addition, a blooming effect may also occu
Résumé du contenu de la page N° 13
Part names and their functions [Front and bottom] Lens mount Screw holes for mounting the Although the lens mount conforms to the camera (1/4-inch) type C mount lens. Used when mounting the camera to a fixer Mounting the lens ( page E17) or rotating platform. Camera mounting bracket Side switch panel (inside) Although the mounting bracket is mounted Open the door to access a switch panel on the bottom of the camera when shipped, used when making settings on menus. the bra
Résumé du contenu de la page N° 14
1. Introduction (continued) [Rear] [POWER] indicator Lights when power is supplied to the cam-
era. [DC IN] connector ANALOG OUT IEEE1394 (Mini DIN 8-pin, female) Power (DC 12V) for the camera is supplied LENS through this inlet. MD CONTROL For the power supply, use the AA-P700 AC REMOTE DC IN adapter. POWER Pin configurations of connectors ( page SEE INSTRUCTION MANUAL E12) Connecting power ( page E18) [REMOTE] terminal (Metal 10-pin, female)
[ANALOG OUTPUT] connector Us
Résumé du contenu de la page N° 15
Part names and their functions (continued) [Side switch panel section (inside)] [SET] button While the menu screen is displayed, press this button to select a submenu or confirm a selected item or set value. Setting procedure( page E32) [DOWN] button While the menu screen is displayed, press UP/AW this button to move down to a selectable item on the menu. While an item is selected, MENU SET use this button to change the set value. DOWN Setting procedure( page E32) 12 34 Functio
Résumé du contenu de la page N° 16
1. Introduction (continued) Pin configurations of connectors DC IN terminal (Mini DIN 8-pin, female) REMOTE terminal (Metal 10-pin, female) 7 8 1 8 6 7 2 10 9 5 3 6 3 4 5 4 2 1 Pin no. Signal name Pin no. Signal name 1 A. WHITE L active 1NC 2 TRG IN L active 3 WEN L active 3.3V(p-p) 2 GND 4 FLASH 3NC 5NC 4NC 6 RS-SDI 5 GND 7 RS-SDO 6 12V 8 GND 7NC 9 12V 10 OPERATION 8 12V CAUTION LENS terminal (Metal 12-pin, female) • Consult your JVC dealer concerning the re- 10 mote terminal connection. 9 1 •
Résumé du contenu de la page N° 17
ANALOG OUTPUT terminal (D-sub MD CONTROL (Metal 12-pin, female) 15-pin, female) 5 1 10 6 15 11 Pin no. Signal name 1 R OUT 700mV , 75 Ω (p-p) Pin no. Signal name 2 G OUT 700mV(p-p), 75 Ω FOCUS CONT SELECT 1 3 B OUT 700mV , 75 Ω (p-p) 2 ZOOM CONT SELECT 4NC 3 GND 5NC 4 ~ 5 NC 6 R GND +12 V 6 7 G GND 7NC 8 B GND FOCUS CTL 8 9WEN 9 ZOOM CTL 10 GND ~ 10 12 NC 11 GND 12 NC 13 Hs (3.3V(p-p) negative polarity) 14 Vs (3.3V(p-p) negative polarity) 15 NC CAUTION Do not connect directly to mon
Résumé du contenu de la page N° 18
2. Before shooting Connecting through digital output connector The KY-F1030 can be remote-controlled from a personal computer, and the shot image can be shown on the computer’s monitor. Shooting with the camera when the flash is fired by the timing of an external trigger switch. AA-P700 AC ADAPTER AA-P700 Connect to the power supply POWER ON ( page E18) AC OFF AC adapter [IEEE1394] Connecting the IEEE 1394 Special application software Cable ( page E18) KY-LINK [DC IN] [R
Résumé du contenu de la page N° 19
Connecting through analog output connector The image shot by the KY-F1030 can be shown on the computer’s monitor. AC ADAPTER AA-P700 Connect the power supply POWER ON ( page E18) OFF AC adapter Video capture board PC Microscope adapter 1. Connect the KY-F1030’s [ANALOG OUT] connector to the PC’s capture board. 2. Connect the AC adapter (AA-P700) to the KY-F1030, and then turn ON the power. 3. Turn ON the PC. * For instructions on how to operate the video capture board or the employed appli
Résumé du contenu de la page N° 20
2. Before shooting (continued) Combining with a presentation system The image shot by the KY-F1030 can be passed though a scan rate converter and shown on a D-ILA presenter or SXGA-compliant monitor. AC ADAPTER AA-P700 Connect the power supply POWER ON ( page E18) OFF AC adapter D-ILA or SXGA-compliant monitor JVC KM-F700 [VIDEO INPUT] Mount the lens Scan rate converter terminal ( page E17) 1. Connect the KY-F1030’s [ANALOG OUT] connector to the scan rate converter’s [VIDEO INPUT] termi
