Résumé du contenu de la page N° 1
FACSIMILE RECEIVER
FAX-30
Résumé du contenu de la page N° 2
C Your Local Agent/Dealer 9 -52, Ashihara -cho, Nishinomiya, Japan Telephone: 0798 -65 - 2111 Telefax: 0798 -65 -4200 FIRST EDITION : AUG . 2002 All rights reserved. Printed in Japan D 1 : JAN . 22, 200 3 PUB. No. OME -6260 0 FAX-30 (DAMI)
Résumé du contenu de la page N° 3
SAFETY INSTRUCTIONS Safety Instructions for the Operator CAUTION WARNING Use the proper fuse. ELECTRICAL SHOCK HAZARD Do not open the equipment. Use of a wrong fuse may cause serious damage to the equipment Only qualified personnel and void the warranty. should work inside the equipment. Immediately turn off the power at the switchboard if water leaks into the WARNING LABEL equipment or something is dropped in A warning label is attached to the the equipment. facsimile receiver. Do not remov
Résumé du contenu de la page N° 4
Safety Instructions for the Installer CAUTION WARNING ELECTRICAL SHOCK HAZARD Observe the following compass safe Do not open the equipment distances to prevent interference to a unless totally familiar with magnetic compass: electrical circuits and Standard Steering service manual. compass compass Facsimile Only qualified personnel 0.9 m 0.6 m Receiver should work inside the equipment. Turn off the power at the switchboard before beginning the installation. Fire or electrical shock c
Résumé du contenu de la page N° 5
TABLE OF CONTENTS FOREWORD ..................................................................................................................vi SYSTEM CONFIGURATION ..........................................................................................ix EQUIPMENT LISTS .......................................................................................................xi 1. OVERVIEW, SETUP ......................................................................................
Résumé du contenu de la page N° 6
3.2.3 Turning on/off specific timer programs..........................................................................3-4 3.2.4 Clearing all timer programs ...........................................................................................3-4 3.3 Displaying Facsimile Images ...................................................................................................3-5 3.4 Processing Facsimile Images................................................................................
Résumé du contenu de la page N° 7
7. INSTALLATION........................................................................................................ 7-1 7.1 Facsimile Receiver...................................................................................................................7-1 7.2 Antenna Unit ............................................................................................................................7-2 7.2.1 General antenna connection ....................................................
Résumé du contenu de la page N° 8
FOREWORD A Word to the Owner of the FAX-30 FURUNO Electric Company thanks you for purchasing the FURUNO FAX-30 Facsimile Receiver. We are confident you will discover why the FURUNO name has become synonymous with quality and reliability. For over 50 years FURUNO Electric Company has enjoyed an enviable reputation for quality and reliability throughout the world. This dedication to excellence is furthered by our extensive global network of agents and dealers. Your equipment is desig
Résumé du contenu de la page N° 9
Operational Characteristics General • The equipment receives one facsimile image or naxtex message at a time. Thus, a navtex message cannot be received when a facsimile image is being received and vice versa, regardless of navtex message category. • Three receiving modes are available, facsimile, navtex, and facsimile(timer) & navtex. When using the facsimile(timer) and navtex, the order of priority is Facsimile(timer) (highest priority) → Navtex (lowest priority) • The FAX-30 does no
Résumé du contenu de la page N° 10
• Browser requirements: Internet Explorer: Ver.5.01/5.5/6.0 Netscape Navigator: Ver.4.78/6.2/7.0 • OS and browser compatibility Internet Explorer Netscape Navigator Ver. 5.01 Ver. 5.5 Ver 6.0 Ver. 4.78 Ver. 6.2 Ver. 7.0 Windows 98 OK OK # *1, *2 *2 NO, *3 Windows 2000 OK OK OK *1 # OK Windows XP # # OK # # OK *1 A facsimile image may not be updated after it has been processed (noise limiter, zoom, etc.). To update the image, click the right button on the mouse while holding down th
Résumé du contenu de la page N° 11
SYSTEM CONFIGURATION Network installation PREAMP FAX-5 Wire Antenna FACSCIMILE RECEIVER FAX-30 Radar, Plotter 10.4" NavNet Series HUB* Ship’s Mains 12-24 VDC * = HUB is not required to connect : Standard NavNet display unit directly. : Option : User Supply Network installation ix
Résumé du contenu de la page N° 12
PC installation PREAMP FAX-5 Wire Antenna FACSIMILE RECEIVER FAX-30 HUB* PC Printer PC : Standard FAX-30 cannot be Ship’s Mains : Option accessed by more 12-24 VDC : Local Supply than one PC at a time. * = HUB is not required to connect single PC. x
Résumé du contenu de la page N° 13
EQUIPMENT LISTS Standard supply Name Type Code No. Qty Remarks Facsimile FAX-30-E-AN — With Net cable Select Receiver FAX-30-E-AP — With PC cable one FAX-30-E-N — No connection cable Spare Parts SP08-01901 005-952-780 1 set Fuse, 2 pcs. Installation CP08-01700 000-057-103 Choose • Power Cable Materials one MJ-A3SPF0024-035 • Net Cable MJ-A6SPF0014-050 • Tapping screw (5 X 20) CP08-01710 000-057-104 • Power Cable MJ-A3SPF0024-035 • PC Cable MJ-A6SPF/TM11AP8C050 • Tapping scre
Résumé du contenu de la page N° 14
Optional supply Name Type Code No. Remarks Preamp Unit FAX-5 000-075-016 w/15 m cable Hose Clamp OP08-11 005-946-960 For fixing FAX-5 to a mast Whip Antenna 04S4176 000-112-845 2.6 m, for FAX-5 Extension Cable OP-04-2 *10* 000-041-174 M-connector at both ends Kit OP-04-2 *20* 000-041-175 OP-04-2 *30* 000-041-176 OP-04-2 *40* 000-041-177 OP-04-2 *50* 000-041-178 Cable Assy. MJA6SRMD/TM11AP8-005 000-144-463 Net conversion cable, for HUB, NavNet Cable Assy. MJ-A6SPF/TM11AP8C050 000-1
Résumé du contenu de la page N° 15
1. OVERVIEW, SETUP 1.1 Overview, Setup: NavNet 1.1.1 Controls Trackball Displays the mode Chooses menu items and options. selection window. Displays alarm message board. Clears data. Opens FAX-30 menu; returns to standby. ENTER knob Push: Registers setting. Soft keys Rotate: Selects menu items and options. ABC DEF GHI 1 2 3 May also be used to enter alphanumeric data. JKL MNO PQR 4 5 6 STU VWX YZ& Enter alphanumeric data. 7 8 9 EBL _'# GAIN VRM 0 Long press: Turns power off. Momentary press
Résumé du contenu de la page N° 16
1. OVERVIEW, SETUP 1.1.2 Preparations for using the FAX-30 The NavNet series display unit must output the date and time data sentence ZDA through the network in order to use the facsimile timer recording feature. Further, automatic navtex requires the geographical position data sentence GGA (GPS position fix data) or GLL (geographic position, latitude/longitude). Output appropriate data sentences from the NavNet display unit to the FAX-30 as follows: 1. Turn on the NavNet display unit.
Résumé du contenu de la page N° 17
1. OVERVIEW, SETUP 1.1.3 Accessing the FAX mode 1. Turn on the FAX-30 at the ship’s mains switchboard. The FAX-30 proceeds in the following sequence: a) The FAX-30 starts initial set up, which takes about 15 seconds. b) The FAX-30 transfers (loads) data from the ROM to the RAM. At this time the LED flashes every 0.4 seconds. c) After all data has been loaded, which takes about two minutes, the LED flashes every two seconds, indicating the FAX-30 is ready for operation. LED (green) FA
Résumé du contenu de la page N° 18
1. OVERVIEW, SETUP The standby display is where you begin all facsimile and navtex operations. If a facsimile image has been received, the latest facsimile image is displayed. FAX-30 Facsimile image area WX FAX NAVTEX Soft keys MODE SETUP Standby display 1.1.4 Choosing the receive mode The FAX-30 has three modes: facsimile only, navtex only, and facsimile (timer) & navtex. Choose desired mode as follows: 1. At the facsimile standby display, press the MODE SETUP soft key. MODE SETUP
Résumé du contenu de la page N° 19
1. OVERVIEW, SETUP 1.1.5 Receive notification You may wish to be notified after a facsimile image or navtex message arrives. A U Notification is done by showing the “fax/navtex received” icon ( X) at the left-hand side of the screen in display modes other than the fax mode. 1. At the facsimile standby display, press the MODE SETUP soft key. 2. Press the RX NOTICE soft key. RX NOTICE ⁄ ON ¡ OFF RX notice options 3. Rotate the [ENTER] knob to choose ON or OFF as appropr
Résumé du contenu de la page N° 20
1. OVERVIEW, SETUP 1.2 Overview, Setup: PC 1.2.1 Accessing the FAX-30 top display 1. Turn on the FAX-30 at the mains switchboard. The FAX-30 proceeds in the following sequence: a) The FAX-30 starts initial set up, which takes about 15 seconds. b) The FAX-30 transfers (loads) data from the ROM to the RAM. At this time the LED flashes every 0.4 seconds. c) After all data has been loaded, which takes about two minutes, the LED flashes every two seconds, indicating the FAX-30 is ready for
