Résumé du contenu de la page N° 1
Español Français English
LCD Television Users Guide
19" class (18.5" Diagonal)
LT-19A200
HIGH DEFINITION TELEVISION
Important Note:
In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your
sales receipt or invoice to the inside cover of this guide. Keep this user’s guide in a convenient place for future reference. Keep the
carton and original packaging for future use.
Model No:
Serial Number:
0209TKH-FU-FU
Résumé du contenu de la page N° 2
Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. The lightning flash with arrowhead symbol, within an CAUTION equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the RISK OF ELECTRIC SHOCK apparatus’s enclosure that may be
Résumé du contenu de la page N° 3
English This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 2.8 inches (7cm) or more around this apparatus. Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Batteries (battery pack or battery installed)
Résumé du contenu de la page N° 4
fr front side ont side NTRODUCTION I Supplied Accessories remote control batteries (AA x 2) Screw for attaching the (RM-C-2150) stand x 3 (FPH34120) • If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual. Attaching the Stand You must attach the stand to the unit to have it as a table top unit. Be sure the front and rear of the stand match the proper direction. Spread a th
Résumé du contenu de la page N° 5
WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION INTRODUCTION PREPARATION English Features Contents Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 • DTV/TV/CATV Trademark Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - You can use your remote control to select INTRODUCTION channels which are broadcast in digital format and Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 6
NTRODUCTION I Control Panel 1. y (power) (p. 15) Press to turn the unit on and off. 2. CH - / + (p. 16 / p. 17) Press to select channels or move up (+) / down (-) through the main menu items. 3. SETUP (p. 15 / p. 44) Press to display the main menu. 4. VOL - / + (p. 16) Press to adjust the volume or move right (+) / left (-) through the main menu items. 5. STAND BY indicator Lights up red when power is off. 6. POWER ON indicator 5 Lights up blue when power is on. 6 7 7. infrared sensor window
Résumé du contenu de la page N° 7
WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION INTRODUCTION PREPARATION English Remote Control Function 1. MUTE (p. 14) 9. POWER (p. 13) Press to turn the sound on and Press to turn the unit on and off. off. 10. AUDIO (p. 15) 8 2. Number buttons (p. 14) Digital mode (D TV) • Press to select channels. • Press to select the audio 1 9 - (hyphen) language. 10 • Press to shift the subchannel Analog mode ( TV) from the main channel. • Press to select the audio mode. 11 3. SETUP (
Résumé du contenu de la page N° 8
REPARATION P No supplied cables are used in this connection: Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility. Before you connect... Be sure your antenna or other device is connected properly before plugging in the AC power cord. Antenna Connection Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit. rear of this unit e.g.) VHF / UHF antenna RF co
Résumé du contenu de la page N° 9
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION English No supplied cables are used in this connection: Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility. External Device Connection [HDMI Connection] HDMI connection offers the highest picture quality. HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digita
Résumé du contenu de la page N° 10
REPARATION P No supplied cables are used in this connection: Please purchase the necessary cables at your local store. [Component Video Connection] RCA component video connection offers better picture quality for video devices connected to the unit. If you connect to the unit’s component Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Component Video Connector. e.g.) rear of this unit (green) (blue) (red) Y Pb/Cb Pr/Cr COMPONENT VIDEO OUT T TLE 5 CHAP ER 15
Résumé du contenu de la page N° 11
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION English No supplied cables are used in this connection: Please purchase the necessary cables at your local store. [Video Connection] RCA video connection offers standard picture quality for video devices connected to the unit. If you connect to the unit’s Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Video connector. When the audio jack of the video device is monaural, connect an RCA
Résumé du contenu de la page N° 12
REPARATION P No supplied cables are used in this connection: Please purchase the necessary cables at your local store. [PC Connection] This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a PC monitor. Use an VGA cable for this connection and it requires stereo mini plug audio cable as well. e.g.) rear of this unit VGA cable VGA cable should be with ferrite core. personal computer stereo mini plug audio cable The following signals can be dis
Résumé du contenu de la page N° 13
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION English These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Initial Setup This section will guide you through the unit’s initial setting which includes Use [Cursor s / B] to select the desired location setting, 4 selecting a language for your on-screen menu and autoscan, which then press [ENTER]. automatically scans and memorizes viewable channels. Initial
Résumé du contenu de la page N° 14
ATCHING TV W Channel Selection Volume Adjustment - + Select channels by using [CHANNEL / ] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. • To select the memorized channels, use - + [CHANNEL / ] or [the Number buttons]. • To select the non-memorized channels, use - + Use [VOLUME / ] to adjust the audio volume. [the Number buttons]. To Use [the Number buttons] Volume 30 TV - When selec
Résumé du contenu de la page N° 15
INTRODUCTION OPTIONAL SETTING TROUBLESHOOTING INFORMATION PREPARATION WATCHING TV English Still Mode Switching Audio Mode You can pause the image shown on the TV screen. This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode. TV Press [STILL] to pause the image shown on the TV Press [AUDIO] to display the currently selected screen. audio mode. While receiving an MTS broadcast, press repeatedly to cycle through the availa
Résumé du contenu de la page N° 16
ATCHING TV W TV Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. DTV TV In the digital mode, the detailed broadcasting information for the current In the analog mode, the current channel number and the audio mode are channel such as program title, program guides are displayed. displayed. Press [INFO] to display the details of the currently Press [INFO]. selected program. 11 SAP / STEREO 480i 80 SD D 4:3 4 3 T
Résumé du contenu de la page N° 17
INTRODUCTION OPTIONAL SETTING TROUBLESHOOTING INFORMATION PREPARATION WATCHING TV English TV Screen Display Mode 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. And 3 types of display modes can be selected for PC input signal. Press [SCREEN MODE] repeatedly to switch the TV aspect ratio. For 4:3 video signal For 16:9 video signal Sidebar Full Full Zoom Wide Cinema Expand Cinema Sidebar Full Display a 4:3 picture at its original
Résumé du contenu de la page N° 18
PTIONAL SETTING O Main Menu Autoscan This section describes the overview of the main menu displayed when you If you switch wires (e.g., between antenna and CATV) or if you move the press [SETUP]. For more details, see the reference page for each item. unit to a different area after the initial setting, or if you restore the DTV The main menu consists of the function setting items below. channel you deleted, you will need to perform autoscan. Before you begin: Make sure the unit is connected
Résumé du contenu de la page N° 19
INTRODUCTION WATCHING TV TROUBLESHOOTING INFORMATION PREPARATION OPTIONAL SETTING English Channel List Manual Register The channels selected here can be skipped when selecting the channels This function lets you add the channels that were not added by + using [CHANNEL -/ ]. the autoscan due to the receptible condition at the initial setting. Those channels can still be selected with [the Number buttons]. Press [SETUP] to display the main menu. Press [SETUP] to display the main menu. 1 1
Résumé du contenu de la page N° 20
PTIONAL SETTING O Antenna Confirmation Language Selection You can choose English, Spanish, or French as your on-screen language. DTV This function lets you check the digital signal strength of each channel. Press [SETUP] to display the main menu. Press [SETUP] to display the main menu. 1 1 Use [Cursor K/ L] to select “CHANNEL”, then press Use [Cursor K/ L] to select “LANGUAGE”, then press 2 2 [ENTER]. [ENTER]. PICTURE PICTURE S OUND S OUND CHANNEL CHANNEL DETAIL DETAIL LANGUAGE LANGU
