Résumé du contenu de la page N° 1
DNX210EX
GPS NAVIGATION SYSTEM
AUDIO INSTRUCTION MANUAL
SYSTÈME DE NAVIGATION GPS
MODE D’EMPLOI
SISTEMA DE NAVEGACIÓN GPS
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new GPS Navigation System.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to
Résumé du contenu de la page N° 2
Contents Safety precautions 3 Menu system 16 Menu System Notes 4 Touch Sensor Tone Manual Clock Adjustment General fegatures 6 SI (System Indicator) Power Display Illumination Control Selecting the Source Dimmer Volume Switching preout Attenuator Supreme Setting Audio Control CRSC (Clean Reception System Circuit) Audio Setup Receive mode Setting Bass Boost Electronic Serial Number (ESN) display Speaker Setting Auxiliary Input Display Setting Switching Display Text Scroll Subwoofer Output CD Read
Résumé du contenu de la page N° 3
Safety precautions Do Not Load 3-in. CDs in the CD slot 2WARNING If you try to load a 3 in. CD with its adapter into the To prevent injury or fire, take the following unit, the adapter might separate from the CD and precautions: damage the unit. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside About CD players/disc changers connected the unit. to this unit • Mounting and wiring this product requires skills and Kenwood disc changer
Résumé du contenu de la page N° 4
Notes • If you experience problems during installation, About Audio file consult your Kenwood dealer. • Playable Audio file • When you purchase optional accessories, check with AAC (.m4a), MP3 (.mp3), WMA (.wma) your Kenwood dealer to make sure that they work • Playable disc media with your model and in your area. CD-R/RW/ROM • The characters which can be displayed by this unit • Playable disc file format are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { } | ISO 9660 Level 1
Résumé du contenu de la page N° 5
Handling CDs 2CAUTION • Do not touch the recording surface of the CD. Use of controls or adjustments or performance of procedures other than those specified herein may • Do not stick tape etc. on the CD, or use a CD with result in hazardous radiation exposure. tape stuck on it. In compliance with Federal Regulations, following • Do not use disc type accessories. are reproductions of labels on, or inside the product • Clean from the center of the disc and move relating to laser product saf
Résumé du contenu de la page N° 6
General features Control knob ATT POWER VOL FM AM Auxiliary input B.BOOST Clock display BOOST indicator ATT indicator • Use the mini-plug which is stereo type and does not Power have any resistance. • The navigation unit outputs audio guidance together Turning ON the Power with the sound of the audio source. The volume of the Press the [POWER] button. audio guidance can be adjusted with the navigation Turning OFF the Power unit. For more details, refer to the Instruction Manual for the navi
Résumé du contenu de la page N° 7
Audio Control Audio Setup Setting the Sound system, such as Volume offset. 1 Select the source to adjust Press the [POWER] button. 1 Select the source to adjust Press the [POWER] button. 2 Enter Audio Control mode Press the [VOL] knob. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio item to adjust Press the [VOL] knob. 3 Select the Audio Setup item to adjust Each time you press the knob, the item to be Press the [VOL] knob. adjusted alternates between the
Résumé du contenu de la page N° 8
General features In Audio file source Speaker Setting Information Display Fine-tuning so that the System Q value is optimal Song title & Artist name "TITLE" when setting the speaker type. Album name & Artist name "ALBUM" 1 Enter Standby Folder name "FOLDER" Press the [POWER] button. File name "FILE" Select the "STANDBY" display. Track number & Play time "P-TIME" Clock "CLOCK" 2 Enter Speaker Setting mode Press the [VOL] knob. In HD Radio source 3 Select the Speaker type Information Display Turn
Résumé du contenu de la page N° 9
Subwoofer Output Turning the Subwoofer output ON or OFF. Push the Control knob toward [AM] for at least 2 seconds. Each time you push the knob, Subwoofer output switches ON and OFF. When it is ON, "SW ON" is displayed. TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [POWER] button. The "CALL" display disappears and the audio system comes back ON. When the call
Résumé du contenu de la page N° 10
Résumé du contenu de la page N° 11
Station Preset Memory Putting a station in the memory. 1 Select the band Push the Control knob towards [FM] or [AM]. 2 Select the frequency to put in the memory Push the Control knob towards [4] or [¢]. 3 Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button. Auto Memory Entry Putting stations with good reception in the memory automatically. 1
Résumé du contenu de la page N° 12
Résumé du contenu de la page N° 13
Fast Forwarding and Reversing Track/File/Disc/Folder Repeat Replaying the song, disc in the Disc changer or Fast Forwarding Audio file folder you are listening to. Hold down toward [¢] with the Control knob. Press the [REP] button. Release to resume the playback. Each time you press the button, the Repeat Play Reversing alternates between the modes shown in the tables Hold down toward [4] with the Control knob. below. Release to resume the playback. In CD & External disc source ⁄ Repeat play
Résumé du contenu de la page N° 14
CD/Audio file/External disc control features Function of Audio file Random Play Folder Select Play all the songs on the disc or Audio file folder in random order. Quickly selecting the folder you want to hear. Press the [RDM] button. 1 Enter Folder Select mode Each time you press the button, Random Play turns Press the [F.SEL] button. ON or OFF. "FLD SEL" is displayed. When the Random mode is ON, "DISC RDM"/"FOLD During Select mode the folder information is RDM"/"RDM ON" is displayed. displa
Résumé du contenu de la page N° 15
Résumé du contenu de la page N° 16
Résumé du contenu de la page N° 17
In Standby mode Display Illumination Control Touch Sensor Tone This function turns off the display when you perform no operation for 5 seconds. This function is Setting the operation check sound (beep sound) effective when you are driving at night. ON/OFF. Display Setting Display Setting "BEEP ON" Beep is heard. "DISP ON" Keeps the display on. "BEEP OFF" Beep is canceled. "DISP OFF" Turns off the display when you perform no operation for 5 seconds. ⁄ In Standby mode • Set the Display Illumi
Résumé du contenu de la page N° 18
Menu system In Standby mode In FM reception Switching preout CRSC (Clean Reception System Circuit) Alternating the preout between the rear and Temporarily have reception alternate from stereo to subwoofer. (With the subwoofer the sound outputs mono to reduce multi-path noise when listening to without being effected by fader control.) the FM station. Display Setting Display Setting "SWPRE R" Rear preout. "CRSC ON" The CRSC is ON. "SWPRE SW" Subwoofer preout. "CRSC OFF" The CRSC is OFF. ⁄ • Stro
Résumé du contenu de la page N° 19
mode closes. In Satellite radio source • You can only set the Auxiliary input display when the Electronic Serial Number (ESN) built-in auxiliary input or the auxiliary input of optional display KCA-S220A is used. Displaying the Electronic Serial Number. Display Text Scroll "ESN ************" Setting the displayed text scroll. ⁄ • Electronic Serial Number (ESN) Display Setting It is important to retain the unit serial number and the "SCL AUTO" Repeats scroll. electronic Satellite radio Id
Résumé du contenu de la page N° 20
Menu system In Standby mode Demonstration mode Setting Sets the demonstration mode. 1 Select the Demonstration mode Push the Control knob towards [FM] or [AM]. Select the "DEMO" display. 2 Set the Demonstration mode Press the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below. Display Setting "DEMO ON" The Demonstration mode function is ON. "DEMO OFF" Exit Demonstration mode (Norm
