Résumé du contenu de la page N° 1
Professional Weather Center
INTRODUCTION
Model: WMR200 / WMR200A Thank you for selecting the Oregon Scientific™ Professional Weather Center
(WMR200 / WMR200A).
USER MANUAL
The base station is compatible with other sensors. To purchase additional sensors,
please contact your local retailer.
CONTENTS
Introduction .............................................................................................................. 1
Sensors with this logo are compatible with this unit.
Packaging Cont
Résumé du contenu de la page N° 2
ASSEMBLY PARTS BACK VIEW 4 1 5 1x Vertical 1 x Cone-Shaped 1 x Horizontal Attachment Bracket End Attachment Bracket 6 2 7 3 1 x Bottom Pole 1x Top Pole 1 x Mid Pole 1. USB socket 2. Backlight (continuous) On/Off 3. Battery compartment 2 x Rectangular 2 x Round U- bolts Base Legs 4. AC / DC socket 3 x Eye pins 5. Wall mount holes / Adjustable table stand 6. RESET: Reset unit to default settings 7. EU/UK slide switch (WMR200 only) 4 x screws (Type A) LCD DISPLAY 1 x Versatile Base (Wall or
Résumé du contenu de la page N° 3
4. Indicates pressure alarm is ON 1. Indicates HI / LO outdoor temperature alarms are ON 5. User selectable altitude / pressure measurement unit 2. MAX / MIN temperatures (refer to date stamp on clock area for more details) 3. Sensor batteries low RAINFALL 4. Displays from 1-10 outdoor sensors 5. Heat index 1 5 6. Outdoor Temperature readings 7. Temperature trend indicators 6 8. Dew point temperature 9. MAX / MIN humidity 2 7 10. Indicates HI / LO outdoor humidity alarms are ON 3 11. Humidity t
Résumé du contenu de la page N° 4
1. Temperature / humidity sensor casing WIND SENSOR 2. Solar power socket 3. RESET button 1 4. Battery compartment GETTING STARTED 2 SET UP REMOTE WIND SENSOR 4 The wind sensor takes wind speed and direction readings. The sensor is battery and solar powered operated. It is capable of transmitting data to the base station wirelessly within an approximate operating range of 100 meters (328 feet). IMPORTANT Ensure that the wind sensor is pointing North to enable it to record accurate readin
Résumé du contenu de la page N° 5
To mount the temperature / humidity sensor: 4. Insert sensor into the casing, twist and click to the right to secure. 5. Slide temperature and humidity sensor onto the smaller end of the sensor connector. 12 REMOTE UNIT ASSEMBLY 3 4 2 12. Slide outdoor sensor onto vertical attachment bracket. 1 15 1. Insert the cone-shaped end into the pole. 2. Using 2 screws, fix it firmly into place. 13 3. Insert the versatile plastic base into the pole. Align the holes of the pole with the holes of the plast
Résumé du contenu de la page N° 6
Securing the assembled remote unit: 9 7 21 8 22 10 7. Slide the solar panel connector into place on the other side of the bracket. Slot the solar panel in place. 21. Insert the 2 rectangular base legs through the holes of the versatile base and 8. Adjust the solar panel. Once facing desired direction, use screw to fix in place. hammer down. 9. Loosen the wing bolt and adjust the angle. Tighten wing bolt to secure solar 22. Using the string, tie a knot on the eye pins. Hammer each eye pin in
Résumé du contenu de la page N° 7
To set up the Rain Gauge: 2 1 Install the base station batteries (4 x UM-3 / AA) matching the polarity (+ / -). Press RESET after each battery change. 1. Remove screws and slide the cover off in an upwards motion. 2. Insert the batteries (2 x UM-3 / AA), matching the polarities (+ / -). Press RESET NOTE Do not use rechargeable batteries. It is recommended that you use alkaline after each battery change. batteries with this product for longer performance. INSERT BATTERIES 1. Remove the bat
Résumé du contenu de la page N° 8
NOTE Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours UV to get a valid signal. The UV index levels are as follows: To enable / disable signal reception: UV INDEX DANGER LEVEL ICON 0-2 Low Press and hold Clock area to enable / disable signal reception. A beep will sound to confirm action. 3-5 Moderate NOTE For best reception, the base station should be placed on a flat, non-metallic 6-7 High surface near a window in an upper floor of your home. The antenna sho
Résumé du contenu de la page N° 9
4. Press UP / DWN to set the desired values. 41°C to 54°C Danger Heat exhaustion likely (105°F to 129°F) 5. Press • ALARM to confirm and continue to next setting OR. 54°C to 92°C Strong risk of dehydration / sun Extreme danger (130°F to 151°F) stroke • touch anywhere on the screen (except tool bar / weather forecast area) to confirm and exit. NOTE Heat index is only calculated when temperature is 80° F / 27°C or above. To enable / disable alarms: 1. Press desired area to activate. WIND 2. P
Résumé du contenu de la page N° 10
To view remaining days for records: SPECIFICATIONS MAIN UNIT Press clock area until DATA LOGGER mode is displayed. Dimensions 149 x 198 x 47 mm (L x W x H) (5.9 x 7.8 x 1.9 inches) NOTE When DATA LOGGER is full, i.e., no more records can be stored on unit, Weight 510 g (1.12 lbs) without battery ‘DATA LOGGER’ and ‘O Days’ will flash. INDOOR BAROMETER To upload records to PC: Barometer unit mb/hPa, inHg and mmHg Plug USB and upload onto computer. Measuring range 700 – 1050mb/hPa Accuracy +/
Résumé du contenu de la page N° 11
Accuracy 25% - 40%: +/- 7% We 40% - 80%: +/- 5% Name: Oregon Scientific, Inc. th 80% - 90%: +/- 7% Address: 19861 SW 95 Ave.,Tualatin, Comfort 40% to 70% Oregon 97062 USA Memory Current, Min and Max Telephone No.: 1-800-853-8883 Battery 2 x UM-4 (AAA) 1.5V batteries declare that the product RF TRANSMISSION Product No.: WMR200 / WMR200A RF frequency 433MHz Product Name: Professional Weather Center Range Up to 100 meters (328 feet) with Manufacturer: IDT Technology Limited no obstructions Addr
