Instruction d'utilisation Harbor Freight Tools 94799

Résumé du contenu de la page N° 1

WIRELESS HOME ALARM
94799
ASSEMBLY AND OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may
differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
®
Copyright © 2006 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical q

Résumé du contenu de la page N° 2

Specifications Item Description Function 6-station, wireless sensors detect and sound when door or window is opened. Alarm Delay Time 5 seconds after sensor tripped System Range From Sensors to Main Unit: 328 to 500 feet Batteries Main Unit: 3-AA; Sensors: 3-SR54 (each); Remote control: 1-23A (12VDC) Main Unit LED lights and high pitch sound heard when numbered sensor is tripped; Modes: Alarm/Off/Chime Key Chain System modes: On and Off; LED indicator. Remote Controls Mounting Double-sided adhes

Résumé du contenu de la page N° 3

6. Do not overreach. When using a ladder, keep proper footing and balance at all times. 7. Stay alert. Watch what you are doing, use common sense. 8. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. Note: Performance of this product may vary depending on variations in Sensor and Main Unit batt

Résumé du contenu de la page N° 4

2. Unscrew the back cover of each Remote Control and insert the battery (supplied) into the back of the Remote. Pay attention to the battery polarity (+ and -). See photo below-right. Main Unit Remote Control Note: Each Sensor comes with a battery installed. Since the internal battery is only used when the Magnetic Strip is moved away (sensor tripped), it should last two years. The batteries of the Remote Controls should also last two years. 3. Select the six Sensor locations. They should be pla

Résumé du contenu de la page N° 5

7. Peel the Adhesive Pad backing from one of the Magnetic Strips and mount it parallel to, and no more than 1/4 inch from, the Sensor. See photos at the bottom of page 4. 8. Repeat steps 5 to 7 for each Sensor and Magnetic Strip. 9. Using a small round-head screw (not supplied), screw into the desired mounting location. Place the hole in the back of the Main Unit over the screw, and slide the unit down to lock in place. Note: Not all the Sensors need to be used for the Wireless Home Alarm to wor

Résumé du contenu de la page N° 6

Arm Alarm System On the Remote Control, press the ON button. The LED on the Remote Control will temporarily turn on. This can be done from outside the house or other protected structure. Disarm Alarm System On the Remote Control, press the OFF button. The LED on the Remote Control will temporarily turn on. This can be done from outside the house or other protected structure. Remote Control Troubleshooting Problem Possible Cause Probable Solution When system is armed, 1. Sensor is turned Off. 1.

Résumé du contenu de la page N° 7

Parts List Item Description Qty 1. Main Unit 1 2. Sensor 6 3. Magnetic Strip 6 4. Battery, Remote Control 2 5. Remote Control 2 6. Battery, Sensor 6 7. Pads, Adhesive 6 Parts Photo (2) (2) (2) (3) (3) (3) (7) (1) (4) (4) (5) (5) (3) (3) (2) (3) (2) (2) (6) Sensor Battery not shown. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PA