Instruction d'utilisation Axor Citterio 39233XX1

Résumé du contenu de la page N° 1

Installation Instructions / Warranty
Axor Citterio
Axor Citterio
39133XX1
39135XX1
Axor Citterio Axor Citterio
39233XX1 39235XX1

Résumé du contenu de la page N° 2

Axor Citterio Widespread Lavatory Faucet Axor Citterio Widespread Bidet Faucet 39133XX1 / 39135XX1 39233XX1 / 39235XX1 Technical data Hole size in mounting surface Spout 1 3/8“ Valve 1 1/4“ Max. thickness of mounting surface 1 3/16“ Max. flow rate 2.2 gpm Operating pressure: max. 147 psi Recommended operating press.: 14.7 - 72.5 psi Test pressure: 232 psi Hot water temperature: max. 176° F* Recommended hot water temp.: 120°F - 140°F* *Please know and follow all applicable local plum

Résumé du contenu de la page N° 3

Installation Flush the supplies thoroughly before installation. Install the metal washer and friction washer on the valve. Push the valve up through the hole in the mounting surface. Install the mounting plate. Rest the valve assembly on the mounting sur- face. Tighten the screws. Place the handle assembly over the valve with the lever or cross in the desired off position. Hold the lever or cross steady with one hand. With the other hand, thread the escutcheon down over the mounti

Résumé du contenu de la page N° 4

Sit the spout on the countertop. Install the mounting piece mounting collar. Attach the compression Y to the bottom of the spout fitting with the enclosed 10 mm compres- sion fitting. The metal side of the ferrule should point upwards. Tighten wrench tight. Screw the connection hoses to the Y. Attach the hoses to the valves with the enclosed 3/8“ compression fittings. Use two wrenches, 7/16” as shown, to prevent the hoses from twisting. Connect the valves to the stops with 1/2“ supp-

Résumé du contenu de la page N° 5

Install the pop-up drain Remove the plunger assembly. Unscrew the drain outlet flange from the tee. plunger Unscrew the tailpiece from the tee. Wrap height adjuster the threads with two layers of Teflon tape and replace. flange Install the white, flexible sealing gasket to the flange. Place it in the sink outlet. From under the sink, install the black mack gas- ket, white friction ring and retainer nut to the sealing gasket flange. Do not tighten the nut against the bottom of the sink

Résumé du contenu de la page N° 6

Replacement parts 1 cold handle, cross 39291XX0 2 hot handle, cross 39292XX0 3 lever handle, cold 39291XX0 4 lever handle, hot 39292XX0 5 cold cartridge 94008000 6 hot cartridge 94009000 7 aerator 96673000 8 aerator 94005XX0 9 spout 96674XX0 10 spout 96675XX0 11 lift rod 96676XX0 12 fixation set 96016000 13 connection hose 94071001 XX = Color code 14 10 mm compression ftg 94158000 00 = chrome 15 3/8“ compression ftg 88513000 82 = brushed nickel 16 pivot ball for bidet 96050XX0 9 1 11 7 2 5 3 10

Résumé du contenu de la page N° 7

Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning. Cleaning Materials for Faucets and Showers Acids are a necessary ingredient of cleaning materials for removing lime, however please pay attention to the following points when cleaning faucet

Résumé du contenu de la page N° 8

including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year, with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products. THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, ne