Instruction d'utilisation Sony VAIO PCGXG9

Résumé du contenu de la page N° 1

4. Locate the two keyboard locking tabs at the base of the keyboard panel. The first tab
VIKING COMPONENTS is located below the “Fn” key and the second tab is located below the “Home” key. With a
small flat-bladed
MEMORY INSTALLATION GUIDE
screwdriver or a paper
®
clip, unlock the key-
SONY
board panel from the
VAIO PCG-XG9
computer chassis by
sliding both locking
tabs toward the front
of the system.
5. To completely release the
keyboard panel from the
chassis, lift the front of the
keyboard pan

Résumé du contenu de la page N° 2

9. To install a memory module, insert the module into an expansion slot at an angle and then push it down until it clicks into place. To be certain that the module is installed cor- rectly, ensure that the off-center notch on the module is aligned with the off-center key of the expansion slot. The module can only be installed one way due to the position of the notch. 10. Return the keyboard panel back to its original position and be sure both keyboard locking tabs have been secured. Close the di