Instruction d'utilisation Yazoo/Kees ZT MAX ZKHP52233

Instruction d'utilisation pour le dispositif Yazoo/Kees ZT MAX ZKHP52233

Dispositif: Yazoo/Kees ZT MAX ZKHP52233
Catégorie: Tondeuse
Fabricant: Yazoo/Kees
Dimension: 0.21 MB
Date d'addition: 3/19/2013
Nombre des pages: 21
Imprimez l'instruction

Téléchargez

Comment utiliser?

Notre objectif consiste à vous assurer le plus rapide accès au contenu de l'instruction d'utilisation du dispositif Yazoo/Kees ZT MAX ZKHP52233. En utilisant l'aperçu en ligne vous pouvez parcourir le sommaire et passer à la page où vous trouverez la résolution de votre problème avec Yazoo/Kees ZT MAX ZKHP52233.

Pour votre confort

Si regarder l'instruction Yazoo/Kees ZT MAX ZKHP52233 directement sur la page n'est pas confortable pour vous, vous pouvez profiter de deux solutions possibles:

  • Exploration au mode de plein écran - pour analyser l'instruction d'une manière commode (sans l'avoir téléchargée sur votre ordinateur) vous pouvez utiliser le mode d'exploration en plein écran. Pour démarrer l'exploration de l'instruction Yazoo/Kees ZT MAX ZKHP52233 en plein écran, utilisez le bouton Plein écran.
  • Téléchargement sur l'ordinateur - vous pouvez aussi télécharger l'instruction Yazoo/Kees ZT MAX ZKHP52233 sur votre ordinateur et la sauvegarder dans vos ressources. Si vous n'avez pas envie de gaspiller votre espace disque, vous pouvez toujours télécharger cette instruction du ManualsBase dans l'avenir.
Yazoo/Kees ZT MAX ZKHP52233 Manuel d'utilisation - Online PDF
Advertisement
« Page 1 of 21 »
Advertisement
Version imprimée

Beaucoup de gens préfèrent de lire les documents dans la version imprimée et non pas sur l'écran. L'option d'impression de l'instruction est aussi prévue et vous pouvez en profiter en cliquant le lien ci-dessus - Imprimez l'instruction. Il n'est pas nécessaire d'imprimer toute l'instruction Yazoo/Kees ZT MAX ZKHP52233 - on peut choisir des pages. Economisez le papier.

Résumés

Vous trouverez ci-dessous les annonces des contenus qui se trouvent sur les pages suivantes de l'instruction de Yazoo/Kees ZT MAX ZKHP52233. Si vous voulez parcourir rapidement le contenu des pages suivantes de l'instruction, vous pouvez en profiter.

Résumés du contenu
Résumé du contenu de la page N° 1

Operator’s Manual for
MODELS: ZKH52223
ZKH52253
ZKH61253
ZKHP52233
ZKHP52253
ZKHP61253
ZKW52233
ZKW61233
Professional Quality Lawn Care Equipment
since 1945
Thank you for buying a YAZOO/KEES ZT Max! Before operating your new mower, read,
understand and follow the important safety instructions and the other instructions con-
tained in this manual. Lawnmowers and all power equipment, can be potentially danger-
ous if used improperly. SAFETY REQUIRES GOOD JUDGEMENT, CAREFUL USE IN
ACCORDANCE WIT

Résumé du contenu de la page N° 2

Congratulations on the purchase of your Yazoo/Kees mower. This manual has been pre- pared for the owners and operators of the ZT MAX™ 52" and 61" commercial mowers. Read, understand and follow the saftey and operating instructions. ! WARNING Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each per

Résumé du contenu de la page N° 3

TABLE OF CONTENTS SAFETY: MAINTENANCE: 1. Training 1. Engine oil level 2. Preparation 2. Pump drive belt compartment 3. Operation 3. Mower blades 4. Transportation 4. Safety interlock system 5. Maintenance 5. Hardware 6. Air cleaner SETUP AND ADJUSTMENTS: 7. Engine oil 1. Park brake 8. Hydraulic oil 2. Cutting height 9. Tire presure 3. Mower deck leveling 10. Battery 4. Mule drive belt tension 11. Belts 5.Throttle lever tension 12. Lubrication 6. Reverse spring detent adjustment 13. Fuel filter

Résumé du contenu de la page N° 4

SAFETY TRAINING: 1. Read this manual carefully and question your dealer if something is not clear. 2. Be thoroughly familiar with the controls and proper use of the equipment. 3. Never allow children, teenagers, or people unfamiliar with these instructions to use the mower. 4. Do not mow while people, particularly children, or pets are nearby. PREPARATION: 1. The use of personal protective equipment such as (but not limited to) protection for the eyes, ears, feet and head is recommended. 2. Neve

Résumé du contenu de la page N° 5

SAFETY 14. Do not operate in an unsafe manner. Use caution when making maneuvers. Sharp cornering, turning & slopes can be unsafe if caution isn’t used. TRANSPORTATION: Use a heavy duty trailer to haul mower. Set park brake, turn off fuel valve and strap mower to trailer. NOTE: Park brake will not hold mower in place when transporting. Be sure to tie down the mower to the trailer. Always back onto the trailer to prevent possible tipover. 1. Keep all nuts, bolts and screws tigh

Résumé du contenu de la page N° 6

EQUIPMENT SETUP AND ADJUSTMENTS 1. Uncrate mower 2. Mount drive wheels using the four lug nuts installed on the hub. 3. Check tire pressure in all four tires. Pressure for all four tires is 15 psi 4. Remove the motion control levers and install on the outside of the control arms (See figure 1). Tabs on the motion control levers should be directed to the rear of the mower. Align the levers so they are even in the neutral position. (See figure 6) 5. Install seat rod to the seat frame with 5

Résumé du contenu de la page N° 7

ADJUSTMENTS PARK BRAKE: 1. Stop engine and remove key. Release park brake and measure the length of the spring. The distance between the washers on each end of the spring should be 2-7/8" (See Fig 2 ). 2. If adjustment is needed, loosen the nut below the spring. Then rotate nut to desired position so the proper distance between the washers is obtained. Check other side for proper adjustment. 3. Engage the brake lever and measure the distance between the trunnion pin and the collar welded to

Résumé du contenu de la page N° 8

ADJUSTMENTS Figure 3 MULE DRIVE BELT TENSION: 1. Stop engine and remove the key. 2. Check to make sure the bolt head in the spring loaded idler pulley, on the left side of the engine deck is positioned between the two alignment holes in the left support plate (See Fig 4). 3. If adjustment is necessary, loosen the adjustable idler pulley on the right hand side of the engine deck so it can move up and down in the slot. Place a wrench on the 3/8" nut in the center of the spring loaded idler pulley

Résumé du contenu de la page N° 9

ADJUSTMENTS 5. If adjustment is necessary, loosen the nut against the yoke. Apply slight rearward pres- sure to the motion control lever and turn the head of the adjustment bolt in the proper direc- tion until the lever is centered in the neutral slot. NOTE: if properly adjusted the motion control levers will return to neutral from the reverse position and reverse motion will stop if levers are released. Figure 5A Figure 5B 9

Résumé du contenu de la page N° 10

ADJUSTMENTS MOTION CONTROL LINKAGE ADJUSTMENT: 1. This adjustment must be made with the drive wheels rotating. Raise rear of the unit and block it up so the wheels are free to rotate. CAUTION: Keep hands, feet and clothing away from rotating tires. 2. Tilt seat forward and remove the seat rod from seat so the seat can rotate down onto the frame. Make sure the seat is adjusted toward the rear of the unit so it clears the controls on the console. 3. Place a 2x4 board approximatly 10 to 12 inches l

Résumé du contenu de la page N° 11

OPERATING INSTRUCTIONS NOTE: To begin motion the operator must be in the seat and the brake disengaged before the levers can be moved from the neutral slots or the engine will kill. By moving the levers an equal amount forward or back the mower will move in a straight line in that direction. Movement of the right lever forward will cause the right wheel to rotate in a forward direction. Movement of the left lever forward will cause the left wheel to rotate in a forward direction. To stop forwar

Résumé du contenu de la page N° 12

OPERATING INSTRUCTIONS STARTING AND OPERATION: 1. Operator must be sitting in the seat. Engage park brake, blades off and place the motion control levers in the neutral slots. (See figure 6) 2. Adjust throttle to 1/2 and set choke (if needed) turn key and release as soon as engine starts. 3. Release park brake. 4. Close motion control levers. 5. Engage blades and set RPM to maximum. NOTE: Be sure all persons are clear of area before engaging the blades. To prolong spindle bearing and belt life e

Résumé du contenu de la page N° 13

MAINTENANCE 1. Engine oil level: Check daily with engine cold and on a flat surface. Remove the dipstick and wipe clean. Reinsert the dipstick all the way. Remove the dipstick and check oil level. If oil level is low remove oil fill cap and add oil. Use engine manufacturers specs for type of oil. 2. Pump drive belt compartment: Stop engine and remove key. Tilt seat forward and lift rubber flap. Clean all debris from inside. Inspect rubber flap for proper fit and replace if needed. NOTE: Cleaning

Résumé du contenu de la page N° 14

MAINTENANCE 9. Tire pressure: Check every 25 to 50 hours. All four tires require 15 psi. 10. Battery: Check every 25 hours. Check electrolyte level. If needed fill to the full line marked on the side of the battery. Fill with distilled water. Do not try starting the engine with a weak battery. Recharge or replace the battery. The engine condensers and electronic iginition can be damaged internally with less than or more than the required 12 volts. 11. Belts: Check every 25 hours. Stop engine

Résumé du contenu de la page N° 15

SPECIFICATIONS Engine: . . . (Ref. see Kohler Manual) Mower Specifications: Power (@3600 rpm): Engine: Kohler Command V-Twin CH22 . . . . . . . . . 16.4 kW (22hp) Horsepower: 22 or 25 CH25 . . . . . . . . . 18.6 kW (25hp) Models: CH22S OR CH25S Peak Torque: Decks: 52” or 61” CH22 . . . . . . . . . 45 N*m (33 ft.lbs.) Cutting Height: 1.5” to 5.0” in 1/2” increments CH25 . . . . . . . . . 53 N*m (39.5 ft.lbs.) (38mm to 127mm in 13mm increments) Bore Blades: 18” - 52” deck CH22 . . . . . . .

Résumé du contenu de la page N° 16

TROUBLE SHOOTING PROBLEM POSSIBLE CAUSES 1. Blade switch on. Engine won’t start 2. Drive levers not in the neutral slots. 3. Operator not in seat. 4. Park brake disengaged. 5. Dead battery or cable off. ....(Ignition switch left on) 6. Fuel valve closed or in the wrong position. 7. No fuel. 8. Spark plug wires off. 9. Bad spark plugs. Mower will not move 1. Park brake on. 2. Pump bypass valves open. or moves slowly or hard 3. Pump drive belt loose or off. 4. Hydraulic system failure. 5. Ai

Résumé du contenu de la page N° 17

WIRING DIAGRAM 17

Résumé du contenu de la page N° 18

SERVICE RECORD DESCRIPTION OF WORK DONE SERVICE DONE BY DATE 18

Résumé du contenu de la page N° 19

Yazoo/Kees Limited Two Year Warranty 1. This Limited two-year Warranty is issued by Yazoo/Kees Power Equipment, only to the original purchaser. The warranty period is limited to ninety (90) days when product is or has been used for rental purposes. 2. Yazoo/Kees warrants that all new equipment manufactured by Yazoo/Kees (Yazoo/Kees Products), listed in paragraph 9 hereof, shall be free of defects in material and workmanship for the term described in paragraph 4 below. Component parts, equipmen

Résumé du contenu de la page N° 20

b. Normal maintenance services and normal maintenance items such as brakes, brake shoes, spark plugs, oil, air filters, mower blades, gauge wheels, skids and other wear items. c. Any Yazoo/Kees Product which had been altered or modified in any way. d. Any repair or replacement caused by customer neglect or lack of maintenance. (The purchaser is responsible for making sure that Yazoo/Kees Products are operated and serviced as directed in the applicable manual or service instruction. Incorrect u


Instructions pareilles
# Instruction d'utilisation Catégorie Téléchargez
1 Yazoo/Kees 968999506 Manuel d'utilisation Tondeuse 1
2 Yazoo/Kees 968999698/ZEKH48240 Manuel d'utilisation Tondeuse 0
3 Yazoo/Kees 3-WHEEL RIDER PTO-KM 23 Manuel d'utilisation Tondeuse 0
4 Yazoo/Kees 968999701/ZEKH52240 Manuel d'utilisation Tondeuse 4
5 Yazoo/Kees Collection System CS13 Manuel d'utilisation Tondeuse 0
6 Yazoo/Kees Collection System CS9 Manuel d'utilisation Tondeuse 0
7 Yazoo/Kees 968999727 Manuel d'utilisation Tondeuse 1
8 Yazoo/Kees Commercial Front Cut Rider YHRLK120 Series Manuel d'utilisation Tondeuse 1
9 Yazoo/Kees 968999694/ZEKH42200 Manuel d'utilisation Tondeuse 0
10 Yazoo/Kees Commercial Front Cut Rider YHRLD211 Manuel d'utilisation Tondeuse 1
11 Yazoo/Kees 4HRK20 Manuel d'utilisation Tondeuse 0
12 Yazoo/Kees Commercial Front Cut Rider YHRLK20 Manuel d'utilisation Tondeuse 9
13 Yazoo/Kees Commercial Front Cut Rider YHRLD212 Manuel d'utilisation Tondeuse 0
14 Yazoo/Kees Commercial Front Cut Rider YHRK20 Manuel d'utilisation Tondeuse 1
15 Yazoo/Kees KHKW36140, KHKW48170 Manuel d'utilisation Tondeuse 1
16 2Wire 7-1/4 Inch Circular Saw 94245 Manuel d'utilisation Tondeuse 3
17 Agilent Technologies E4371A Manuel d'utilisation Tondeuse 0
18 Agilent Technologies E4370A Manuel d'utilisation Tondeuse 3
19 Agilent Technologies E4374A Manuel d'utilisation Tondeuse 1
20 Adams 22 Manuel d'utilisation Tondeuse 1