Instruction d'utilisation Blue Microphones 200

Résumé du contenu de la page N° 1

rugged and versatile active dynamic microphone

Résumé du contenu de la page N° 2

congratulations From Blue Microphones, makers of the finest studio recording microphones you can find, comes the en•CORE 200, a studio-grade handheld dynamic microphone designed to deliver exceptional all-around performance, no matter what your application. The en•CORE 200’s Proprietary Dynamic Capsule is specially tuned by Blue’s capsule engineers to deliver natural vocals, balanced highs, and amazing detail and clarity, with electronically transformed output to provide remarkably high

Résumé du contenu de la page N° 3

key features 3 Proprietary Dynamic Capsule tuned for natural vocals and amazing detail and clarity Blue’s innovative Active Dynamic phantom power circuit for consistent tone and minimal noise Cardioid polar pattern delivers impressive off-axis noise rejection and high SPL handling Blue’s proprietary capsule mount to deliver minimal handling noise without pads or filters Stage-ready construction with heavy-gauge barrel construction, reinforced grill, and ha

Résumé du contenu de la page N° 4

directly against the source. For a more natural sound, simply pull the source back from the microphone 2-4 inches. For more tips on microphones and recording, be sure to visit www.bluemic.com. care instructions The en•CORE 200’s metal plated finishes will provide years of service and good looks if properly cared for. To clean your en•CORE 200, simply wipe down with a damp cloth. Use of harsh cleaners or abrasives may cause damage to your en•CORE’s surface finish. The en•CORE 200 was designed

Résumé du contenu de la page N° 5

5 en CORE 200 • frequency response & polar patterns 90° These charts are only a starting point for the sound provided. How the microphone reacts in a particular application will differ greatly because of many variables, like room acoustics, distance from sound source (proximity), tuning of instruments, mic cabling and other factors. For more tips on miking and recording techniques, check out the Blue website.

Résumé du contenu de la page N° 6

architects specifications The microphone shall be of the dynamic moving coil transducer type with the transducer operating in a cardioid polar pattern. The frequency response shall be 50Hz–16kHz. The microphone output impedance shall be 25 ohms. The microphone should have a sensitivity of 2.25 with a max sound pressure level of 147. The microphone shall be 185mm/7.3in in length, and 28mm/1.10in(50mm/1.97in max)in diameter and weigh 0.88 lbs/0.4 kg. The microphone shall be an en•CORE 200. a

Résumé du contenu de la page N° 7

warranty 7 Blue Microphones warrants its hardware product against defects in materials and workmanship for a period of TWO (2) YEARS from the date of original retail purchase, provided the purchase was made from an authorized Blue Microphones dealer. This warranty is void if the equipment is altered, misused, mishandled, maladjusted, suffers excessive wear, or is serviced by any parties not authorized by Blue Microphones. The warranty does not include transportation costs incurred because of

Résumé du contenu de la page N° 8

www.bluemic.com © 2010 Blue Microphones. All Rights Reserved. Blue Microphones, Blue Oval and en•CORE 200 are registered trademarks of Blue Microphones.