Instruction d'utilisation Crown Audio CM-150

Résumé du contenu de la page N° 1

PROFESSIONAL OMNIDIRECTIONAL
CONDENSER MICROPHONE
CM-150
he CM-150 is a ½-inch-diameter
(12.7-mm), omnidirectional electret-
Tcondenser microphone. It is intended
for professional recording, free-field mea-
surement and sound-level measurement.
Because of its pre-aged titanium diaphragm,
the CM-150 is extremely stable over a wide
range of environmental conditions.
The CM-150 has a very flat, wide-range fre-
quency response. The mic is supplied with a
proof-of-performance sheet, which shows
Spec

Résumé du contenu de la page N° 2

CM-150 Fig. 3 6.315" (16.04 cm) .520" dia. .750" dia. (1.32 cm dia.) (1.91 cm dia.) Grille .500" dia. (1.27 cm. dia.) Warranty Sensitivity Changes vs. Phantom-Power Voltage Crown professional microphones are guaranteed against malfunction for a pe- The CM-150 has different sensitivity at riod of three years from date of original different phantom voltages. If you use phantom powering other than 48 volt, purchase. Please refer to the enclosed full warranty statement for more detail. change the pr