Résumé du contenu de la page N° 1
®
ViewSonic
- User Guide
NMP-640
Commercial Media Player
Model No.: VS13920
Résumé du contenu de la page N° 2
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable prote
Résumé du contenu de la page N° 3
Important Safety Instructions Do not use the equipment near water. 1. Wipe the machine with a soft and dry cloth. 2. Do not block any vent holes. Please install the product in accordance with the manufacturer’s 3. instructions. Do not use the product on your legs for a long time because it gets hot and you may be burned. 4. Please avoid installing the product in a place where the temperature is above 40°C or lower than 5. 0°C, or in a place that is moist or wet. Protect the power cord plu
Résumé du contenu de la page N° 4
Declaration of RoHS Compliance T his product ha s be en de si gned and m anufa c ture d in com pl ia nce wi t h Di rec t ive 2002/ 95/ EC of t he European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Substance Actual Concentration Conc
Résumé du contenu de la page N° 5
Copyright Information © Copyright ViewSonic Corporation, 201 1. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product impro
Résumé du contenu de la page N° 6
Table of Contents Chapter 1 Introducing the NMP-640 Left/Right side View ............................................................................................ 2 Front Side View .................................................................................................. 2 Top Side View .................................................................................................... 3 Back Side View ................................................................................
Résumé du contenu de la page N° 7
Chapter 1 Introducing the NMP-640 The NMP-640 Network Media Player is a compact and easy to use desktop. It features all the standard PC capabilities but with a slim body design which enables you to do spreadsheets, create documents, watch online content and browse the internet in a smarter and greener way. This chapter introduces NMP-640: · Left/Right side View · Front Side View · Top Side View · Back Side View · Bottom View NMP-640 1
Résumé du contenu de la page N° 8
Introduction The NMP-640 features all the desktop capabilities but with a slim body design which enables you to browse the internet in a relaxed and comfortable way. 1-1 Left/Right side View 150.00mm 1-2 Front Side View Description No. Name 1 SYS LED Indicates system status 2 HDD LED Indicates hard disk status 3 Power Button Turns the power on/off NMP-640 2 190.00mm 25.4mm
Résumé du contenu de la page N° 9
1-3 Top Side View No. Name Description 1 Connects to a microphone Microphone in Port 2 Headphone out Port Connects to headphones 3 USB2.0/e-SATA Combo Connects USB2.0 or e-SATA devices 4 Multi-Function Card Reader Support SD/MS/MS pro/MMC memory cards 1-4 Back Side View Description No. Name 1 Air vent For cooling system to let air flow in side the chassis 2 Kensington Lock Anti-theft lock 3 HDMI Port Connects to HDMI audio and video 4 USB 2.0 Port Connects to USB 2.0 devices 5 D-Sub Port Conn
Résumé du contenu de la page N° 10
Chapter 2 Connecting Peripherals In this chapter, the placement and the connection of some necessary peripherals will be introduced. This chapter includes the following information: · Placement of the NMP-640 Network Media Player · Connections of the NMP-640 NMP-640 4
Résumé du contenu de la page N° 11
2-1 Placement of the NMP-640 Network Media Player 1. On the Desk Seat the unit in the desktop stand as shown to the right. 2. Mounted to the back of a display This is the best space-saving way. 1.Use four screws(M4*10, round head) to fasten the VESA mounting bracket to the back of the display. NMP-640 5
Résumé du contenu de la page N° 12
2. Fit the NMP-640 into the bracket with the power button located at the top for easy access. 3.Install top bar on the bracket. NMP-640 6
Résumé du contenu de la page N° 13
2-2ConnectionofNMP-640 1. Connecting the NMP-640 to a monitor Connect to the monitor thru the VGA connector. 2．Connecting USB Devices Connect USB devices using the USB ports on the top or back, for example, mouse and keyboard. 3．Connecting the network cable Connect the LAN cable into the RJ-45 port with the other end connected to a hub or switch. NMP-640 7
Résumé du contenu de la page N° 14
4．Connecting the power cord Connect the power adapter to the power input port of the NMP-640, and push the power button to start it up. NMP-640 8
Résumé du contenu de la page N° 15
Chapter 3 BIOS Setup This chapter provides a description of the BIOS setup utility. The BIOS setup menus and available selections may vary from those of your product. For specific information on the BIOS for your product, please contact ViewSonic ® . The BIOS setup utility provides a built-in Setup program, which allows the user to modify the basic system configuration and hardware parameters. The modified data will be stored in a battery-backed CMOS, so that data will be retained even when
Résumé du contenu de la page N° 16
MainMenu The BIOS Setup is accessed by pressing the button after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. The Main Menu provides System Over-view information and allows you to set the System Time and Date. Use the “←” and “→” cursor keys to navigate between menu screens. ►SystemTime This item allows you to configure the desired time. Use [ENTER], [TAB] or
Résumé du contenu de la page N° 17
Advanced Menu ►Quick Boot If this item is set as Enabled, the system can be started within five seconds and some detection items will be ignored. The options are [Disabled] and [Enabled]. ►Quiet Boot To start the system quietly. (Full Screen Log display can be shut down) ►Onboard LAN Controller[Enabled] This item is used to enable or disable the Onboard LAN Controller. ►OnboardLANROM[Disabled] This item is used to enable or disable the Onboard LAN ROM. ►RestoreonACPower Loss [Last State] Thi
Résumé du contenu de la page N° 18
Boot Menu ►BootDevicePriority Press to go to relative submenu. ►1stBoot Device These items are used to specify the boot sequence from the available devices. Security Menu ►ChangeSupervisorPassword Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen displays the default Not Installed. After you have set a password, this item displays Installed. NMP-640 13
Résumé du contenu de la page N° 19
►ChangeUser Password Select this item to set or change the user password. The User Password item on top of the screen displays the default Not Installed. After you have set a password, this item displays Installed. ►Clear User Password Select this item to delete the user password. Exit Menu ►Save Changes and Exit Exit system setup after saving the changes. Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved to the CM
Résumé du contenu de la page N° 20
Chapter 4 Windows 7 Hard Disk Recovery Solution This chapter introduces the Windows 7 recovery · Using the recovery partition. Recovery partition contains a factory installed operating system, drivers and other applications of the image file. The recovery partition can quickly restore your computer to its original state, so that your hard disk can operate in the best condition. Please backup your data files (such as Outlook PST file) to the other disk before using the recovery partition. Abo
