Instruction d'utilisation Panasonic 1140E

Résumé du contenu de la page N° 1

Nortel 1140e Bluetooth User Guide

Enabling Bluetooth
1 Double-press Services to open the Local Tools menu.

2 Press the 3 key on the telephone dialpad to select 3. Network Configuration

3 Use the Right Arrow Key to scroll to Enable Bluetooth located at the bottom of the menu, change the value to YES

4 Press Apply & Reset to save your changes (the phone will reboot)


Bluetooth Setup
Your IP Phone 1140E is equipped with a Bluetooth wireless technology radio system to support
w

Résumé du contenu de la page N° 2

high to low tone is heard. The headset blue LED turns off. b Press and hold the telephone button for about 8 seconds until the blue LED flashes and then lights steadily. 5 Search for (pair) the headset: a Press the Right navigation key twice to highlight the Search button, displayed next to the Search Devices item. b Press the Enter key. The message “Searching....” is displayed. c If the search is successful, a list of Bluetooth wireless devices appears in the Found: combo box. d C

Résumé du contenu de la page N° 3

b Press the Up/Down navigation keys to open the list. Press the Up/Down navigations key to scroll in the list and highlight your headset. c Press the Enter key to select the headset and close the list. Press the Enter key to exit edit mode. 11 Choose one of the following: • If only one headset is paired, proceed to step 12. • If more than one Bluetooth wireless headset is paired, the first headset paired is automatically made the active device. To make a different headset active, do t

Résumé du contenu de la page N° 4

again either when the phone is idle or during an active call. To switch between a wired headset and wireless headset: 1 Double-press the (Headset) key to open the 3. Bluetooth Setup dialog box. 2 Press the Left/Right navigation key to select the Use BT Headset item. 3 Press the Enter key to toggle this option on or off. A check mark indicates that the wireless headset is used. Clear the check mark to use a wired headset. On (o) by default. To unpair a Bluetooth wireless technology h