Résumé du contenu de la page N° 1
Home Network
Installation Instructions
TM
156342
Résumé du contenu de la page N° 2
Installation Instructions Table of Contents Overview..........................................................................................................2 Installation Considerations............................................................................2 Quick Installation Instructions ......................................................................2 Identifying and Creating the Home Network and Available Ethernet Port 3 Determining if There is Broadband Internet Service ........
Résumé du contenu de la page N° 3
Overview These instructions guide you through connecting compatible DISH Network satellite receivers to a broadband home network to use the receiver’s Internet connectivity for additional features, such as downloading movies and programs not available over the satellite. See pages 12-13 to learn more about these features. Installation Considerations • To access expanded capabilities and features of the DISH Network receiver, you must have broadband Internet service, not telephone-based dial-
Résumé du contenu de la page N° 4
Identifying and Creating the Home Network and Available Ethernet Port Determining if There is Broadband Internet Service In addition to these steps, contact your Internet service provider to verify if you have broadband Internet service. Can you make calls using the home phone while using the Internet? • Yes. Go to step 2. • No. You have dial-up Internet and it must be upgraded to a broadband Internet service before using the receiver’s Internet-based features. When connecting to the Internet
Résumé du contenu de la page N° 5
Is there an available ETHERNET Router or or LAN port on the router or Gateway gateway? • Yes. Go to Connecting the Satellite Receiver to an Available Ethernet Port on Ethernet page 7. Port • No. Go to step 3. Figure 3. Identifying Available Ethernet Port Is there an Ethernet switch (or hub) Ethernet Switch connected to one of the ETHERNET or LAN or Hub ports on the router or gateway? • Yes. Go to step 4. Router or •No. Go to Adding an Ethernet Switch on Gateway page 5. Figure 4. Identifyi
Résumé du contenu de la page N° 6
Installation and Setup Use these instructions to add an Ethernet switch to the home network to create additional Ethernet ports, to connect the satellite receiver to the home network, and to setup the receiver once it is connected to the home network. Adding an Ethernet Switch Refer to Diagram 1 and 2 and the instructions below to connect an Ethernet switch to the router or gateway for additional available Ethernet ports. Diagram 1. Overview of Home Network with Ethernet Switch Connected Eth
Résumé du contenu de la page N° 7
On the existing router or gateway, disconnect the Ethernet cable for an existing piece of equipment connected to an ETHERNET (or LAN) port. This equipment will be connected to the Ethernet switch in step 2, below. Note: Do not disconnect the cable connected to the router or gateway port labeled BROADBAND, INTERNET, or WAN. Connect the Ethernet cable disconnected in step 1 to an available ETHERNET port on the Ethernet switch. Refer to the Ethernet switch’s installation instructions for any ad
Résumé du contenu de la page N° 8
Connecting the Satellite Receiver to an Available Ethernet Port If the satellite receiver is located close to the router, gateway, or Ethernet switch, use the steps Connecting the Satellite Receiver Using Ethernet Cable, below. If the satellite receiver is not located close to the router, gateway or Ethernet switch, use the steps Connecting the Satellite Receiver Using a HomePlug-to- Ethernet Adapter on page 8. Connecting the Satellite Receiver Using Ethernet Cable Refer to Diagrams 3 and 4 a
Résumé du contenu de la page N° 9
Connect one end of the Ethernet cable to an available ETHERNET (LAN) port on the router, gateway, or Ethernet switch. Connect the other end of the Ethernet cable to the ETHERNET port on the back of the satellite receiver, verifying the cable “clicks” into place. Check the lights on the receiver’s ETHERNET port. • The green light should be lit indicating the ETHERNET port is enabled and connected to an active port on the router/switch. • The yellow light flashes whenever data is being receiv
Résumé du contenu de la page N° 10
One HomePlug-to-Ethernet adapter must be obtained for use at the location of the router, gateway, or Ethernet switch. One adapter supports up to 15 receivers. The ViP-series of DISH Network receivers include HomePlug 1.0 support. HomePlug Turbo adapters can also be used. Note: These adapters may also be referred to as “HomePlug-to- Ethernet Bridge”, “Powerline Ethernet Adapter”, or “Powerline Network Adapter”. To identify adapters that are compatible with HomePlug 1.0 or Turbo, look for eith
Résumé du contenu de la page N° 11
Setting up the Receiver Once the receiver has been connected to the home network, use these steps to set up and verify the receiver’s Internet connection. Using the DISH Network remote control for the receiver that is connected to the home network, access the Network Setup screen by pressing MENU, selecting System Setup, Installation, Broadband Setup, then Network Setup. Verify the IP address is populated (not all 0s). If the IP address is all 0s, select Reset Connection. An Attention 875 me
Résumé du contenu de la page N° 12
Verify the receiver can successfully connect to DISH Network by pressing MENU on the remote control, selecting System Setup, then Diagnostics. Select Connection to test the Internet connection. The Connection option also tests the phone line, if connected. The results should display Broadband Connection OK. Diagnostics Screen Note: If a phone line is not also connected to the receiver, connection results will display Phone Connection Failure. This is OK. To connect to DISH Network to update
Résumé du contenu de la page N° 13
Using DishONLINE DishONLINE allows you to download movies and other programs to the ViP622 DVR and ViP722 DVR satellite receiver using your broadband Internet connection. Access DishONLINE by pressing the DVR button on the DISH Network remote control. In the DISH On Demand menu, select the DishONLINE option. DISH On Demand Menu Once you are in the DishONLINE menu, you have the following options available: • My Rentals: Provides a summary of all the programs that have been rented, the downloa
Résumé du contenu de la page N° 14
Download List Download List is accessed from the My Rentals menu, and allows you to view all the programs scheduled to download (queued), adjust the order in which programs will be downloaded, and delete scheduled downloads. If you have multiple downloads scheduled, the next program in the Download List begins downloading when the first program has completed. Download List New Releases and DISH Theater New Releases and DISH Theater list programs that are available for download. The New Re
Résumé du contenu de la page N° 15
Troubleshooting Description Procedure Connection status 1. On the home network, are there other DISH Network satellite receivers or personal on Network Setup computers connected? screen is Not a. If another receiver is connected to the home network, check to see if its connection Connected, or status is Not Connected. Error 789 is b. If a computer is connected to the home network, check to see if the computer is able received when to access an external website (for example, www.dishnetwork.co
Résumé du contenu de la page N° 16
Description Procedure Other receivers or 1. Ensure the broadband router is plugged in to power. computers are 2. If the installation uses a broadband modem that is separate from the router: affected: a. Ensure the modem is plugged in to power. Not Connected b. Ensure the modem is connected to the router using an Ethernet or USB cable. status on Network c. Verify the cable connecting the modem to the Internet is connected to the correct port Setup screen or on the modem. DSL modems use a phone c
Résumé du contenu de la page N° 17
Description Procedure HomePlug 1. Ensure the HomePlug-to-Ethernet adapter is plugged firmly into the electrical outlet. The Troubleshooting adapter should not be plugged into a GFI electrical outlet. 2. Verify the HomePlug-to-Ethernet adapter is not plugged into a switched outlet. 3. If a surge protector is used for either the satellite receiver or the HomePlug-to-Ethernet adapter, a surge protector that is approved for use with HomePlug devices must be used, and the adapter and receiver mus
Résumé du contenu de la page N° 18
Home Network Installation Instructions 156342
