Résumé du contenu de la page N° 1
TL-R4000
Enterprise Broadband Router
Rev: 1.0.1
1910010031
Résumé du contenu de la page N° 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2008 TP-LINK TECHNOLOGIES
Résumé du contenu de la page N° 3
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communica
Résumé du contenu de la page N° 4
Package Contents The following contents should be found in your package: One TL-R4000 Enterprise Broadband Router One power cord for TL-R4000 Enterprise Broadband Router Mounting kits for installing in a standard 19” rack One Resource CD for TL-R4000 Enterprise Broadband Router, including: • This Guide • Other Helpful Information Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor.
Résumé du contenu de la page N° 5
CONTENTS Chapter 1. Introduction....................................................................................................................1 1.1 Overview of the Router......................................................................................................1 1.2 Features ............................................................................................................................1 1.3 Panel Layout ..........................................................
Résumé du contenu de la page N° 6
4.10 DDNS ..............................................................................................................................41 4.10.1 Dyndns.org DDNS ................................................................................................41 4.10.2 Oray.net DDNS.....................................................................................................42 4.10.3 Comexe.cn DDNS ........................................................................................
Résumé du contenu de la page N° 7
TL-R4000 Enterprise Broadband Router User Guide Chapter 1. Introduction 1.1 Overview of the Router The TL-R4000 Enterprise Broadband Router possesses excellent throughput and driving load capability, which consumedly meets the requirements from Internet café and small/medium/sizable enterprise with volumes of users, making a more expedite communication. The superior performance will bring you full-new experience of a non-bottle-neck network. TL-R4000 Enterprise Broadband Router makes
Résumé du contenu de la page N° 8
TL-R4000 Enterprise Broadband Router User Guide Supports firmware upgrade Supports Remote and Web management Standard 19-inc rack-mountable steel case 1.3 Panel Layout 1.3.1 The Front Panel The front panel of the TL-R4000 consists of several LED indicators, which is designed to indicate connections. Viewed from left, Table 1-1 describes the LEDs on the front panel of the router. 12 3 4 TL-R4000 M1 Pow er M2 Enterprise Broadband Router Figure 1-1 Front Panel sketch Name Action
Résumé du contenu de la page N° 9
TL-R4000 Enterprise Broadband Router User Guide WAN RJ45 port for connecting the router to a cable, DSL modem or Ethernet One expansion slot for fiber module, sharing with WAN port, the recommended module is TL-SM21 series. 1.3.2 The Rear Panel The rear panel of the TL-R4000 only features a power receptacle, which is an AC power receptacle. Connect the female of the power cord head here, and the male head to the AC power outlet. 100-240V~ 50-60Hz Figure 1-2 Rear Panel sketch 3
Résumé du contenu de la page N° 10
TL-R4000 Enterprise Broadband Router User Guide Chapter 2. Connecting the Router 2.1 System Requirements Broadband Internet Access Service (DSL/Cable/Ethernet) One DSL/Cable modem that has an RJ45 connector (It’s not necessary if you connect the router to Ethernet) Each PC on the LAN needs a working Ethernet Adapter and an Ethernet cable with RJ45 connectors TCP/IP protocol must be installed on each PC Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navi
Résumé du contenu de la page N° 11
TL-R4000 Enterprise Broadband Router User Guide Chapter 3. Quick Installation Guide After connecting the TL-R4000 router into your network, you should configure it. This chapter describes how to configure the basic functions of your TL-R4000 Enterprise Broadband Router. These procedures only take you a few minutes. You can access the Internet via the router immediately after it has been successfully configured. 3.1 TCP/IP configuration The default IP address of the TL-R4000 Enterprise
Résumé du contenu de la page N° 12
TL-R4000 Enterprise Broadband Router User Guide Figure 3-1 Successful result of Ping command If the result displayed is similar to what is shown in Figure 3-1, the connection between your PC and the router has been established. Figure 3-2 Failed result of Ping command If the result displayed is similar to what shown in Figure 3-2, it means that your PC has not connected to the router. If so, refer to the following steps for a solution. 1. Is the connection between your PC and the
Résumé du contenu de la page N° 13
TL-R4000 Enterprise Broadband Router User Guide admin for the User Name and Password, both in lower case letters. Then click the OK button or press the Enter key. Figure 3-4 Login Windows Note: If the above screen does not prompt, it means that your web-browser has been set to a proxy. Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it. If the User Name and Password are correct, you can
Résumé du contenu de la page N° 14
TL-R4000 Enterprise Broadband Router User Guide compatible with your ISP, if you are given another way not listed here, refer to Network->WAN for detailed list. Click Next to enter the necessary network parameters. If you choose "PPPoE", you will see this page shown in Figure 3-7: Figure 3-7 Quick Setup - PPPoE Account Name and Password - Enter the Account Name and Password provided by your ISP. These fields are case sensitive. If you have difficulty with this process, please conta
Résumé du contenu de la page N° 15
TL-R4000 Enterprise Broadband Router User Guide Figure 3-9 Quick Setup - Finish After finishing all configurations of basic network parameters, please click Finish button to exit this Quick Setup. 9
Résumé du contenu de la page N° 16
TL-R4000 Enterprise Broadband Router User Guide Chapter 4. Configuring the Router This chapter describes each web page's key functions. 4.1 login After your successful login, you can configure and manage the router. There are nine main menus on the left of the web-based utility. Submenus will be available after you click one of the main menus. The ten main menus are: Status, Quick Setup, Network, DHCP, Forwarding, Security, Static Routing, IP & MAC Binding, Dynamic DNS, and System To
Résumé du contenu de la page N° 17
TL-R4000 Enterprise Broadband Router User Guide Figure 4-1 Router Status 4.3 Quick Setup Please refer to Section 3.2: "Quick Installation Guide." 4.4 Network Figure 4-2 the Network menu There are six submenus under the Network menu: LAN, WAN, MAC Clone, Bandwidth Control, VLAN and Port Mirror. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.4.1 LAN You can configure the IP param
Résumé du contenu de la page N° 18
TL-R4000 Enterprise Broadband Router User Guide Figure 4-3 LAN MAC Address - The physical address of the router, as seen from the LAN. The value can't be changed. IP Address - Enter the IP address of your router in dotted-decimal notation (factory default: 192.168.1.1). Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask. Note: a. If you change the IP address of the LAN, you must use the new IP address to login
Résumé du contenu de la page N° 19
TL-R4000 Enterprise Broadband Router User Guide Figure 4-4 WAN - Dynamic IP This page displays the WAN IP parameters assigned dynamically by your ISP, including IP address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP parameters from your ISP. Click the Release button to release the IP parameters. MTU Size: The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs you need to reduce the MTU. But this is rare
Résumé du contenu de la page N° 20
TL-R4000 Enterprise Broadband Router User Guide Figure 4-5a WAN - 802.1X + Dynamic IP User Name - Enter the user name for 802.1x authentication provided by your ISP Password - Enter the password for 802.1x authentication provided by your ISP. Click the Login button to start 802.1x authentication. Click the Logout button to end 802.1x authentication. 2. If you choose Static IP, you should have fixed IP parameters specified by your ISP. The Static IP settings page will appear, shown
