Résumé du contenu de la page N° 1
Desktop 4500 System
Installation and User Guide
Includes Liberty Printer
110715-000 Revision D
Use this manual to help you:
• Select and configure your PC.
• Install and cable the Desktop autoloader and printer.
• Operate autoloader functions.
Résumé du contenu de la page N° 2
Desktop 4500 Autoloader – Model RAS13 Notice for USA Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification to this equipment may result in the revocation by the FCC of the user's
Résumé du contenu de la page N° 3
Rimage Corporation 7725 Washington Avenue South Minneapolis, MN 55439 FAX: (952) 946-6956 Service: (952) 946-0004 (Asia/Pacific · Mexico/Latin America) (800) 553-8312 (North America) email: support@rimage.com Rimage Technical Website: http://www.rimage.com/technical/ Rimage Europe GmbH Hans-Böckler-Straße 7 63128 Dietzenbach, Germany Tel: +49-(0) 6074-8521-0 FAX: +49-(0) 6074-8521-21 Record of Revisions—PN 110715-000 Revision Date Description C 06/26/03 Cha
Résumé du contenu de la page N° 4
LIMITED 1-Year Warranty Rimage warrants, to the original end user only, that all non-consumable parts of the Rimage Desktop 4500 products will be free from defects in material and workmanship for 12 months, according to the following terms: • Rimage will replace or repair, at Rimage's discretion, any non-consumable parts found defective within the Warranty period. • Valid from the date Rimage ships the product to you. • Factory depot repair to Rimage Minnesota or Rimage Germany with a typ
Résumé du contenu de la page N° 5
Table of Contents Safety Precautions .................................................................................................................... vi Overview -----------------------------------------------------------------------------------------------------------------7 Box Contents.............................................................................................................................. 7 Setup Computer -----------------------------------------------------------
Résumé du contenu de la page N° 6
Find Additional Information ------------------------------------------------------------------------------------- 53 Online Help .............................................................................................................................. 53 Online Manuals........................................................................................................................ 54 Technical Support and Product Updates...............................................................
Résumé du contenu de la page N° 7
Chapter 1 – Overview Overview This manual provides the information needed to unpack, install, and operate the Desktop 4500 autoloader and Liberty printer. The Desktop 4500 consists of an autoloader that can move discs from a three-bin carousel to recorders, and a printer, all integrated into one machine. The three-bin carousel has a capacity of 120 discs and may be loaded or unloaded without interrupting the current order. The Desktop 4500 works in conjunction with Rimage OfficeNet S
Résumé du contenu de la page N° 8
Chapter 2 – Installation Setup Computer If a Rimage Control Center (PC) came with your system, the software is already installed. Go to the “Desktop 4500 Setup” section on page 10. If the system did not come with a computer, the following procedures describe how to configure a computer for the Desktop 4500 autoloader. The computer must meet certain specifications in order to handle two to four recorders and the printing process. Refer to the “Computer Specifications” on page 57. Insta
Résumé du contenu de la page N° 9
Install Carousel 1. Place the carousel on the carousel platter so the alignment hole is aligned with the alignment pin. 2. Press the carousel down firmly. 3. Go to the “Desktop 4500 Setup” on page 10. 1 – Carousel 3 – Alignment Pin 2 – Alignment Hole 4 – Carousel Platter 9 Installation
Résumé du contenu de la page N° 10
Desktop 4500 Setup Proceed through the following directions to set up your system. You may need a 5/32” Allen wrench and a T10 Torx screwdriver to align the printer. Install Printer The following procedure explains how to install the Liberty printer on the Desktop 4500. The Desktop 4500 includes two alignment blocks on the printer adjustment plate to hold and position the printer. 1 – Printer Adjustment Plate 2 – Alignment Blocks 1. Open the printer top cover and place the Liberty pri
Résumé du contenu de la page N° 11
Connect Cables The Desktop 4500 and the Liberty printer require one AC outlet. The PC requires two AC outlets. The Desktop 4500 and Liberty printer features a universal power supply that automatically switches between 120 and 220 Volts. The recorders in the Desktop 4500 are controlled through a Firewire host adapter card. Before connecting the cables, the PC should have the Firewire card installed. 1. Do NOT power on the Desktop system after connecting the cables! 2. Connect the AC pow
Résumé du contenu de la page N° 12
5. Connect one end of the autoloader control cable to the rear of the autoloader so the key of the autoloader control cable is facing up as shown in the picture on the right side. 1 – Key 2 – Autoloader Control Cable 6. Connect the opposite end of the autoloader control cable to the Liberty printer so the key is facing to the left as shown here. 1 – Printer 2 – Autoloader Control Cable 3 – Key Installation 12
Résumé du contenu de la page N° 13
7. Connect the matching end of the USB cable to the printer. 1 – USB Cable 2 – Autoloader Control Cable 8. Connect the other end of the USB cable to the USB connection on the PC. 1 – USB Cable 13 Installation
Résumé du contenu de la page N° 14
9. Connect the printer power cord from the autoloader to the printer. 10. Check all the cable connections as shown in the picture below. Remember, do NOT power on the Desktop system until instructed. 11. Connect all remaining cables to the monitor, mouse, keyboard, and the AC power cords. 12. If your system came with a PC, go to “Install Ink Cartridges” section on page 22. 13. Go to the “Install Liberty Printer Driver” section next. 1 – Firewire Cable 5 – Liberty Printer 9 – AC Power Swi
Résumé du contenu de la page N° 15
Install Printer Driver on Windows 2000 1. Insert the OfficeNet Software Suite disc in the CD-ROM drive. 2. An MSI prompt may appear as below. Select OK and the software will repair itself. If it does not appear, go to step 5. 3. When the Windows Installer is complete, select OK. 4. Select Yes to reboot the computer. 5. If the OfficeNet software installation starts, cancel the installation process. The printer driver must be installed first. 6. Select Windows Start menu and select Run
Résumé du contenu de la page N° 16
9. A “Digital Signature Not Found” dialog displays, indicating that the driver is not signed, select Yes to continue. 10. After the Digital Signature Not Found window closes, apply power to your printer by switching the power switch on the back of the autoloader. 1 – Power Switch 11. After the files are installed, a second dialog displays as shown. Select Yes to continue. 12. Several dialogs appear indicating that the driver files are being installed. The Liberty Printer Driver in
Résumé du contenu de la page N° 17
13. Use Windows’ Start|Programs|Rimage|Utilities|Disc Color Tray Controller to start the Rimage Tray Controller. The tray controller is used with the printer driver to move the printer tray in and out. 14. Go to the “Install Ink Cartridges” section on page 22. Install Printer Driver on Windows XP 1. Insert the OfficeNet Software Suite disc in the CD-ROM drive. 2. If the OfficeNet software installation starts, cancel the installation process. The printer driver must be installed first.
Résumé du contenu de la page N° 18
6. When the Windows Logo testing dialog box appears as shown, select Continue Anyway. 7. When a second Windows Logo testing dialog window appears, select Continue Anyway. 8. When the all prompts are gone, apply power to the autoloader. 1 – Power Switch Several devices are found and displayed in the icon tray area. Installation 18
Résumé du contenu de la page N° 19
9. When the Found New Hardware Wizard window displays, select Next. The next window displays the wizard searching for files. 19 Installation
Résumé du contenu de la page N° 20
10. The next window displays “Disc Color Printer – Firmware missing”. This is normal for this printer since it automatically loads the latest firmware from the PC after the driver is installed. Select Continue Anyway. 11. Select Finish. 12. The prior steps (9-11) are repeated three more times (once for each of the Plug and Play components related to this Printer Driver). The following driver names are installed in the following sequence: a. Disc Color Printer TCH b. Disc Color Print
