Résumé du contenu de la page N° 1
INSTALLATION &
OPERATION MANUAL
MPEG-4 LAN CAMERA
Before trying to connect or operate this product, please read this manual completely
1/3" SONY SUPER HAD CCD
(PAL)
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
Table Of Contents SAFETY PRECAUTIONS .............................................................................3 1. PRODUCT FEATURES.............................................................................4 1.1 PRODUCT INSTRUCTIONS.....................................................................4 1.2 PRODUCT FEATURES ...........................................................................4 1.3 TECHNICAL SPECIFICATIONS ..........................................................
Résumé du contenu de la page N° 4
5. Operating Instructions for Image Software and Network..................25 5.1 MICROSOFT INTERNET EXPLORER......................................................26 5.1.1 Connecting the LAN CAMERA......................................................................................................26 5.1.2 Change Image Setting ......................................................................................................................28 5.1.3 Change the Network Setting ...........
Résumé du contenu de la page N° 5
SAFETY PRECAUTIONS All the following safety and operational instructions to prevent harm or injury to the operator(s) or other persons should be read carefully before the unit is activated. WARNING To prevent fire or shock hazard, avoid exposing this unit to rain or moisture. Do not block ventilation openings. Do not place anything on top of the unit that might spill or fall into it. Do not attempt to service this unit yourself, as opening or removing covers may ex
Résumé du contenu de la page N° 6
1. PRODUCT FEATURES 1.1 Product Instructions This user-friendly device combines cutting-edge sophistication with practical reliability and convenience, high performance with smooth remote communication. Just plug in the network cable!! You’ll get live streaming Video & Audio anytime any place! You’ll have security you can rely on! The especially high resolution has 480 TV lines, a built-in web server and a Network interface to connect you with the Internet securely and fast. Other speci
Résumé du contenu de la page N° 7
◆ Built-in web server. ◆ Our comprehensive Plug & Play features- * PnP video codec–installation of automatic video codec or any component. * PnP IP address–supports UPnP protocol. * PnP configuration–USB interface for setup. * PnP recording–built-in SD card for recording. ◆ Auto white balance (AWB) & auto tracing white balance for color temperatures from 2500°k to 9500°k. ◆ Advanced motion detection–multi-zone & multi-sensitivity. ◆ Privacy image masking with free position and size.
Résumé du contenu de la page N° 8
‧1/3 inch Sony Super HAD CCD sensor. ‧MPEG4 resolution (pixels): 640×480, 320x240 Exposure: ‧Automatic AGC. ‧White Balance: Indoor installation. ‧Exposure times: 1/30-1/27,000s. Sensitivity: ‧Minimum Illumination: 0.5 Lux. F1.2 Image: ‧Image frame rate: up to 25 frames/second. ‧Supports two compression modes, the Motion-JPEG and the MPEG4. ‧5 levels of compression provided. The file size of an M-JPEG compressed image depends on the image’s actual content. Images with a lot of detail
Résumé du contenu de la page N° 9
‧Operation temperature: 41-122° F (5-50° C). ‧Humidity: 20-80% RHG, non-condensing. WARNING: Avoid aiming the camera at the sun or other extremely bright lights. Irrespective of whether the camera is used or unused, the CCD image sensor may be damaged if exposed to very bright objects. Dimensions and weight are as follows. Dimensions / Weight: ‧Height: 55 (mm) ‧Width: 95 (mm) ‧Length: 62 (mm) ‧Weight: 306 g (Not including power supply and mini-tripod.) Accessories Included: ‧CD-R x 1
Résumé du contenu de la page N° 10
2. DESCRIPTION OF THE FRONT/REAR VIEW 2.1 Front Panel and Rear Panel -- Front Panel -- -- Rear Panel -- 2 3 I/O ETHERNET VIDEO DC5V 1 4 5 1. MICROPHONE: The LAN CAMERA has an additional audio function. The device has a microphone built into its front panel which records sound. 2. ALARM I/O & RS-232 Port: The RS-232 communication port functions as a connector to an external control device. This port includes ALARM OUT, GROUND, ALARM IN, and ALARM RECOVER for connecting with ext
Résumé du contenu de la page N° 11
2.2 RS-232 Port & ALARM I/O 1 2 3 4 5 6 7 8 9 1. RS-485 D- 2. RX: This pin is one of the RS-232 pins. It connects with the TX pin of another device. 3. TX: This pin is one of the RS-232 pins. It connects with the RX pin of another device. Please refer to the note below on the standard RS-232 9 Pin Cable with Pin 2 and Pin 3 exchanged; see the pin configuration chart below for details. 4. RS-485 D+ 5. GND: Ground contact. 6. ALARM RESET (INPUT): This pin connects to an alarm-clear devi
Résumé du contenu de la page N° 12
2.3 Flank Panel -- Right Flank Panel -- -- Left Flank Panel -- 1. Lens Mount: This LAN CAMERA is used with either a C or a CS mount lens. 2. ALC VR: Iris control VR. When an auto iris (DC Drive) lens is used, this VR is used to adjust the iris for different lighting environments. Adjust the VR clock-wise to open the iris and counter-clockwise to close the iris of the camera. 3. RESET: Recover to factory default. 4. IRIS: Auto iris connector. This camera works with a DC drive auto iris l
Résumé du contenu de la page N° 13
2.4 The USB function By connecting the LANCAM with a PC via the USB connector, the LANCAM can provide two different functions. 1. Insert an SD card: As a card reader. Insert an SD card into the LAN CAMERA, then connect to the PC. You might transfer files between the SD card and the PC. Once you've connected your LAN CAMERA to your computer, the Windows system will detect the connection and ask you what you want to do with your SD card. In another words, if the user connects the LAN CAME
Résumé du contenu de la page N° 14
3. INSTALLATION Please follow the instructions and the diagram below to set up the system. NOTE: The LAN CAMERA is linked by its Video Out connection via a BNC connector to a monitor's Video In connection. If this connection is there, you can see some information on the monitor screen, such as the LAN CAMERA factory default Static IP address(192.168.1.168). But the LAN CAMERA Static IP address can only appear if there is a connection between the LAN CAMERA and another device. If there is
Résumé du contenu de la page N° 15
3.3 CONNECTING WITH A MULTIPLEXER LAN CAMERA 1 LAN CAMERA 2 TO LAN CAMERA VIDEO OUT BNC CONNECTOR LAN CAMERA 16 3.4 UPDATING SYSTEM SOFTWARE If the system software of the LAN CAMERA needs to be upgraded, please take the following steps to safely process it. Important: Before carrying out the following procedures, please ensure the SD card is working and the file of the system firmware is intact 1. Format an SD card using the FAT16 format if it is unformatted; there are no limi
Résumé du contenu de la page N° 16
9. If the message "UPDATE NG RESET PLEASE" appears rather than "UPDATE OK RESET PLEASE", please write down the error messages shown on the screen and inform your technical support, while ignoring the following steps. 10. Power off the LANCAM when this update process is finished, then remove the SD card from the LANCAM. 11. Reconnect the Ethernet cable to the RJ-45 port if necessary. 12. Power ON the LANCAM and it will work normally if the entire update procedure goes correctly. 13. Ve
Résumé du contenu de la page N° 17
3.5 LAN CAMERA SD card Troubleshooting 1. Check if the SD card position is correct or not. Please refer to the manual for the related information. 2. After powering the LAN CAMERA on, correctly insert the SD card, and a little icon of "SD" will show up in the upper-right corner of the monitor screen. If not, it means the device detection has failed. Please contact your technical support and ignore the following steps. 3. If no cross sign appears beside the "SD" icon, please go on to th
Résumé du contenu de la page N° 18
4. Network Configuration 4.1 Cable Connections Please follow the instructions below to connect your LAN CAMERA to a computer or a network and to choose a proper RJ-45 cable configuration for connections. Physical specifications of the RJ-45 cable for Ethernet Wire Type Cat. 5 Connector Type RJ-45 Max. Cable Length 30 m Hub Wiring Configuration Straight Through PC Wiring Configuration Cross Over 4.1.1 Connect to a computer Use a crossover LAN cable to connect directly to a co
Résumé du contenu de la page N° 19
4.1.2 Connect to a LAN Hub (INTRANET) The RJ-45 PIN configuration for connecting with a LAN Hub is shown below. TO PC NETWORK CARD LAN CAMERA RJ-45 uplink 17
Résumé du contenu de la page N° 20
4.2 Configure Your LAN CAMERA Network Settings Upon connecting with the network hardware, you need to activate the network function and configure the proper network settings of the LAN CAMERA. 4.2.1 Enable DHCP Function This function can only work if the LAN, which the unit is connected to, has a DHCP server. If the DHCP server is working, please move the dip switch points up to 3 on the flank panel; now the LAN CAMERA will obtain an IP address automatically from the DHCP server. In tha
