Résumé du contenu de la page N° 1
NETWORK CAMERA
Model: IK-WR12A
Quick Start Guide and Important Safeguards
This guide describes the hardware installation.
Refer to the user's manual (PDF file) contained in the CD-ROM for settings, operations
and other information.
The application Adobe Reader is needed to view PDF files. If you do not have this
application, download it from the Adobe Systems Incorporated website.
For information on our latest products and peripheral devices, refer to the following
Website:
n http://www.tosh
Résumé du contenu de la page N° 2
Introduction FCC (USA)-INFORMATION NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interfer
Résumé du contenu de la page N° 3
Thank you for purchasing the IK-WR12A Network Camera. Before you start using the camera, read this quick start guide carefully to ensure correct usage. Once you have finished reading this quick start guide, keep it in a convenient place for future reference. The design, specifications, software, and quick start guide contents are subject to change without prior notice. Terms and Trademarks l The term "OS" is used in this manual to indicate operating systems compatible with this product. ®
Résumé du contenu de la page N° 4
Table of Contents Introduction Introduction ....................................................................................................... 2 FCC (USA)-INFORMATION .......................................................................................2 Terms and Trademarks ..............................................................................................3 Table of Contents.............................................................................................. 4 Importan
Résumé du contenu de la page N° 5
Important Safeguards 1. Read Instructions Read all the safety and operating instructions before operating the product. 2. Retain Instructions Retain the safety instructions and user's manual for future reference. 3. Warnings Comply with all warnings on the product and in the user's manual. 4. Follow Instructions Follow all operating and use instructions. 5. Cleaning Disconnect this video product from the power supply before cleaning. 6. Attachments Do not use attachments not recommended by the v
Résumé du contenu de la page N° 6
Important Safeguards (Cont.) 10. Power-Cord Protection Power cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, screws and the point where they exit the product. 11. Installation Install this video product on a secure part of the ceiling or wall. If installed on an unsecured location, the camera could fall causing injury and damage. 12. Lightning For additional protection on this video
Résumé du contenu de la page N° 7
16. Damage Requiring Service Disconnect this video product from the power supply and refer servicing to qualified service personnel under the following conditions. a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the video product. c. If the video product has been submerged in water. d. If the video product does not operate normally by following the operating instructions in the user's manual. Adjust only those controls that are cover
Résumé du contenu de la page N° 8
Important Safeguards (Cont.) CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclama
Résumé du contenu de la page N° 9
Notes on Use and Installation l Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off. l Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen. However, this is not a malfunction. l Treat the camera with care Dropping or subjecting the camera to intense vibration may cause it to malfunction. l Never touch internal parts Do not touch the internal parts of the camera other than
Résumé du contenu de la page N° 10
Setting the Network Camera Environment Items needed for network camera monitoring l Administrator's personal computer The personal computer that allows setting, operating, monitoring and other functions with the network camera is called the "administrator's personal computer" in this guide. * The personal computer for viewing monitored images is called the "user's personal computer" in this quick start guide. The network camera can be viewed by more than one personal computer at the same ti
Résumé du contenu de la page N° 11
Contents l IK-WR12A l AC Adapter Cord length: 72 inches (1828 mm) l Alignment Sticker / Ceiling Hole l Bottom Base Template Sticker Drill hole Ceiling Hole Template Sticker Quick Start Guide and Important CD-ROM l l Safeguards NETWORK CAMERA Content: Model: IK-WR12A IK-WR12A Quick Start Guide and Important Safeguards This guide describes the hardware installation. User's Manual Quick Installation Guide Installation Wizard Refer to the user's manual (PDF file) contained in the CD-ROM for
Résumé du contenu de la page N° 12
Physical Description Inner View IR LEDs Vari-focal Lens (f= 3~9 mm) Light Sensor SD/SDHC Card Slot Rotation Adjustment Screw Tilt Adjustment Screw Pan Adjustment Screw Status LED Reccessed Reset Button Focus Controller Zoom Controller General I/O Terminal Block Ethernet 10/100 RJ45 Plug Audio Out (green) Microphone In (pink) Power Cord Socket (black) Ground Operating environment: –30 °C ~ +50 °C {–22 °F ~ 122 °F} *1 When the temparature inside the Network Camera reaches over 50°C, the fan
Résumé du contenu de la page N° 13
Outer View Dome Cover T r e a t t h e d o m e cover with care when installing, Or it may be damaged. Camera Base c b a Bottom Base c a Record the MAC address under 5678 714270 the camera base before installing the camera. Hole a~c: Holes to secure the bottom base. b 13 13 N.C. N.C. N.C. AC24V AC24V
Résumé du contenu de la page N° 14
Hardware Installation First, use a hex key wrench to loosen the three screws and detach the dome cover from the camera base. Then, follow the steps below to install the camera to either a ceiling or a wall. NOTE Installation should be done only by qualified personnel and conform to all local codes. Ceiling mount (with the bottom base) 1. Attach the supplied alignment sticker to the ceiling. 2. Using the 10 circles on the sticker, drill at least 2 pilot holes symmetrically on each side into
Résumé du contenu de la page N° 15
Wall mount (with the bottom base) 1. Attach the supplied alignment sticker to the wall. 2. Using the 10 circles on the sticker, drill at least 2 pilot holes symmetrically on each side into the wall. Then hammer the four supplied plastic anchors into the holes. 3. Using the four holes on the bottom base, insert the four supplied screws to corresponding holes and secure the bottom base with a screwdriver. 4. Feed the cables through hole A or B. If you want to use hole B, remove the rubber stop
Résumé du contenu de la page N° 16
Drop-ceiling mount (without the bottom base) 1. Attach the supplied ceiling hole template sticker to the ceiling. 2. Open a hole along the inner circle of the sticker. 3. Using the 3 circles on the sticker, drill 3 pilot holes into the ceiling. Then hammer the three sup- plied plastic anchors into the holes. 4. Mount the Network Camera to the ceiling and feed the cables through. 5. Using the three holes on the side of the camera base, insert the three supplied screws into the corresponding hol
Résumé du contenu de la page N° 17
PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 Network Deployment General Connection (without PoE) 1. If you have external devices such as sensors and alarms, make the connection from the general I/O terminal block. N.C.: No Connector N.C. N.C.: No Connector N.C. N.C. N.C.: No Connector AC24V AC24V: Power in 24V AC AC24V AC24V: Power in 24V AC G ND: Ground GND 2. Use the supplied RJ45 female/female DI DI : Digital Input DO coupler to connect the Network Camera to DO : Digital Output +12V a
Résumé du contenu de la page N° 18
PARTITION PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 LINK RECEIVE POWER COLLISION 1 2 3 4 5 Power over Ethernet (PoE) When using a PoE switch The Network Camera is PoE-compliant, allowing transmission of power and data via a single Ethernet cable. Follow the below illustration to connect the Network Camera to a PoE switch via Ethernet cable. For this connection method, the AC adapter is not used. PoE Switch (not supplied) When using a non-PoE switch Use a PoE power injector to connect b
Résumé du contenu de la page N° 19
Assigning IP Address 1. Install the "Installation Wizard" under the Software Utility directory from the CD- ROM. 2. The program will analyze your network environment. After your network is analyzed, please click on the "Next" button to continue the program. Installation Wizard 3. The program searches for other Network Cameras on the same network. 4. After searching, the main installer window will pop up. Click on the MAC that matches the one you just noted from the product label of your device
Résumé du contenu de la page N° 20
Retrieving Images 1. Access to the Network Camera from the network. ® 2. Retrieve live video through Internet Explorer . 2010/09/01 16:34:42 For more information on camera configuration, please refer to user's manual on the CD-ROM. 20 20
