Résumé du contenu de la page N° 1
Grandstream Networks, Inc.
HT–386
Dual FXS Port
Analog Telephone Adaptor
HT–386 User Manual www.grandstream.com
Firmware Version 1.0.3.64 support@grandstream.com
Résumé du contenu de la page N° 2
TABLE OF CONTENTS HT–386 USER MANUAL WELCOME ................................................................................................................................................... 4 Safety Compliances..................................................................................................................................4 Warranty ............................................................................................................................................
Résumé du contenu de la page N° 3
TABLE OF FIGURES HT–386 USER MANUAL IGURE 1: CONNECTING THE HT–386 ............................................................................................................ 5 F FIGURE 2: INTERCONNECTION DIAGRAM OF THE HT–386 ................................................................................ 6 FIGURE 3: SCREENSHOT OF CONFIGURATION LOG-IN PAGE............................................................................ 18 FIGURE 4: SCREENSHOT OF CONFIGURATION UPDATE
Résumé du contenu de la page N° 4
WELCOME Grandstream HandyTone Analog Telephone Adapters/IAD series offers a comprehensive line of affordable VoIP access devices based on Grandstream’s innovative technology platform. The HandyTone series offers the entry-level IP Telephony user superb audio quality, rich functionalities, interoperability rd with the leading 3 party VoIP providers, and compatibility with most service providers. The HandyTone series is ultra-compact, works with any PSTN or cordless phone and fax machines a
Résumé du contenu de la page N° 5
INSTALLATION EQUIPMENT PACKAGING The HT–386 ATA package contains: • One HT–386 Main Case • One Universal Power Adaptor • One Ethernet Cable CONNECTING YOUR ATA HT-386 Analog Telephone Adaptor is an all-in-one VoIP integrated device designed to be a total solution for networks providing VoIP services. The HT-386 VoIP features are available using a regular analog telephone. FIGURE 1: CONNECTING THE HT-386 LED (green/red) +5V/1200mA RJ-11 RJ-45 RJ-11 FXS Port 10M E
Résumé du contenu de la page N° 6
FIVE EASY STEPS TO INSTALL THE HT–386 Following are the steps to install a HT–386: 1. Connect a standard touch-tone analog telephone (or fax machine) to FXS port 1. 2. Connect another standard touch-tone analog telephone (or fax machine) to FXS port 2. 3. Insert a standard telephone cable into the LINE port of HT–386. and connect the other end of the telephone cable to a wall jack. 4. Insert the Ethernet cable into the LAN port of HT–386. and connect the other end of the Ethernet cabl
Résumé du contenu de la page N° 7
PRODUCT OVERVIEW The HT–386 is a next generation dual-port SIP IAD for Internet data, voice, and fax. It supports two (2) FXS ports, each with an independent SIP account or SIP server platform, and a PSTN pass through line for toggling operations between SIP and PSTN networks. The HT–386 offers the entry-level IP telephony rd user superb audio quality, rich functionalities, interoperability with the leading 3 party VoIP providers, and compatibility with most service providers. The Handy
Résumé du contenu de la page N° 8
TABLE 2: HT–386 TECHNICAL SPECIFICATIONS Lines/SIP Accounts 2 lines / 2 SIP accounts Protocol Support SIP 2.0 (RFC 3261), TCP/UDP/IP, RTP/RTCP, HTTP, ARP/RARP, ICMP, DNS, DHCP, NTP, TFTP, PPPoE protocols Feature Keys 1 button LAN/WAN Interface RJ-45 10 Mbps Web interface or via secure (AES encrypted) central configuration file for mass Device Management deployment Support device configuration via built-in IVR, Web browser or central configuration file through TFTP or HTTP Supp
Résumé du contenu de la page N° 9
HARDWARE SPECIFICATION TABLE 3: HT-386 HARDWARE SPECIFICATION LAN interface 1xRJ45 10Base-T FXS telephone port 2 x FXS PSTN Port 1x PSTN pass-through or life line port Button 1 LED Green and Red color Universal Switching Input: 100-240VAC 50-60 Hz Power Adaptor Output: +5VDC, 1200mA UL certified Dimension 70mm (W) x 130mm (D) x 27mm (H) Weight 0.6lbs (0.3kg) o o Temperature 40 - 130 F / 5 – 45 C Humidity 10% - 90% (non-condensing) Compliance Grandstream
Résumé du contenu de la page N° 10
BASIC OPERATIONS GET FAMILIAR WITH VOICE PROMPT The HT–386 has a stored voice prompt menu for quick browsing and simple configuration. Currently, the voice prompt menu and the LED button is designed for FXS Port 1 ONLY. To enter this voice prompt menu, press the LED button or press “***” from the analog phone. TABLE 4: HT-386 IVR MENU DEFINITIONS Menu Voice Prompt Options Main Menu “Enter a Menu Option” Press “*” for the next menu option Press “#” to return to the main menu Ent
Résumé du contenu de la page N° 11
47 “Direct IP Calling” Enter a 12 digit IP address to make a direct IP call, after dial tone. (See “Make a Direct IP Call”.) 99 “RESET” Press “9” to reboot the device; or Enter encoded MAC address to restore factory default setting (See “Restoring Factory Settings”) “Invalid Entry” Automatically returns to main menu NOTE: • Once the button is pressed, you will hear the voice prompt main menu. If the button is pressed again, while it is already in the voice prompt menu, it ju
Résumé du contenu de la page N° 12
DIRECT IP CALLS Direct IP calling allows two parties, that is, a HT with an analog phone and another VoIP Device, to talk to each other in an ad hoc fashion without a SIP proxy. This kind of VoIP calls can be made between two parties if: • Both the HT–386 and other VoIP Device(i.e., another HT ATA or Budgetone SIP phone or other VoIP unit) have public IP addresses, or • Both the HT–386 and other VoIP Device are on the same LAN using private IP addresses, or • Both the HT–386 and oth
Résumé du contenu de la page N° 13
NOTE: “Enable Call Feature” must be set to “Yes” in web configuration page. Caller A can place a call on hold and wait for one of three situations: 1. A quick confirmation tone (similar to call waiting tone) followed by a dial tone. This indicates the transfer is successful (transferee has received a 200 OK from transfer target). At this point, Caller A can either hang up or make another call. 2. A quick busy tone followed by a restored call (on supported platforms only). This m
Résumé du contenu de la page N° 14
PSTN PASS THROUGH HT-386 supports PSTN pass through on FXS port 1. User can make and receive PSTN calls with attached analog phone in Phone 1 port. Phone 2 port (or FXS port 2) does NOT have this feature. • To receive PSTN calls, simply make phone off hook when the analog phone rings. • To make a PSTN call, simply press the PSTN access code (*00 is default, or any number configured in web configuration page) to switch to the PSTN line and get dial tone, then dial the number. FAX
Résumé du contenu de la page N° 15
CALL FEATURES Following table shows the call features (* code) of HT-386. TABLE 5: HT–386 CALL FEATURE DEFINITIONS Key Call Features *23 3 way Conferencing Refer section above above for procedure to perform 3 way Calling. *30 Block Caller ID (for all subsequent calls) *31 Send Caller ID (for all subsequent calls) *67 Block Caller ID (per call). Dial “*67” + ” number ”. No dial tone will be played in the middle. *82 Send Caller ID (per call). Dial “*82” + ” number ”. No dial tone wil
Résumé du contenu de la page N° 16
LED LIGHT PATTERN INDICATION Following tables show the LED light pattern indication. The LED shows PHONE1 status only. TABLE 6: HT–386 LED DEFINITIONS RED LED indicates not normal status Button flashes every 2 seconds. DHCP Failed or WAN No Cable (if DHCP is configured) Button flashes every 2 seconds. HT–496fails to register (if SIP server is configured) Button flashes every 2 seconds. Firmware Upgrading Red light steady. Device Malfunctions GREEN LED indicates normal statu
Résumé du contenu de la page N° 17
CONFIGURATION GUIDE CONFIGURING HT–386 THROUGH VOICE PROMPT DHCP MODE Follow Table 3 with voice menu option 01 to enable HT-386 to use DHCP. STATIC IP MODE Follow Table 3 with voice menu option 01 to enable HT-386 to use STATIC IP mode, then use option 02, 03, 04 to set up HT-386’s IP, Subnet Mask, Gateway respectively. TFTP SERVER ADDRESS Follow Table 3 with voice menu option 06 to configure the IP address of the TFTP server. FIRMWARE SERVER IP ADDRESS Select voice menu option
Résumé du contenu de la page N° 18
CONFIGURING HT-386 WITH WEB BROWSER The HT–386 has an embedded Web server that will respond to HTTP GET/POST requests. It also has embedded HTML pages that allow users to configure the HT–386 through a Web browser such as Microsoft’s IE, AOL’s Netscape or Mozilla Firefox installed on Windows or Unix OS. (Macintosh OS does not included). Access the Web Configuration Menu First, get the IP address of the HT-386 through section “Configuration” with menu option 02. Then access the HT-386’
Résumé du contenu de la page N° 19
The password is case sensitive with maximum length of 25 characters. The factory default password for End User and administrator is “123” and “admin” respectively. Only administrator can get access to the “ADVANCED SETTING” configuration page. NOTE: 1. If you CAN NOT log into the configuration page by using default password, please check with the VoIP service provider. Most likely the VoIP service provider has provisioned the device and configured for you therefore the password has
Résumé du contenu de la page N° 20
TABLE 8: HT-386 BASIC SETTINGS PAGE DEFINITIONS End User This contains the password for end user to access the Web Configuration Password Menu. User can put new password here. This field is case sensitive with maximum of 25 characters Web Port This is the device’s internal HTTP server port. Default is 80. IP Address - If DHCP mode is enabled, then all the field values for the Static IP mode are not used (even though they are still saved in the Flash memory.) The HT-386 will acquire it
