Résumé du contenu de la page N° 1
EXTERNAL TV TUNER BOX
Résumé du contenu de la page N° 2
FCC NOTICE This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial, industrial or business environment. This equipment can generate, use and radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no
Résumé du contenu de la page N° 3
Contents Introduction............................................................................................ 1 What’s in the Package...................................................................... 1 The AVerMedia® AVerTV Box Unit...................................................2 The Touch Button Control Panel ...................................................... 2 Infrared Sensor................................................................................ 2 Connection Po
Résumé du contenu de la page N° 4
Introduction Thank you for purchasing the AVerMedia® AVerTV Box3! With the AVerMedia AVerTV Box3, you can turn your VGA monitor or LCD projector into a TV with or without even having to turn on your computer. Just plug it into your monitor or LCD projector and you’re ready to watch TV or play video games. AVerTV Box3 is completely plug-n-play. There is no software driver required. What’s in the Package ® Your AVerMedia AVerTV Box3 package contains the following items:
Résumé du contenu de la page N° 5
User’s Manual The AVerMedia AVerTV Box3 Unit Touch Button Control Panel The Touch Button Panel found on the top side of the AVerTV Box3 provides quick access to commonly used functions. POWER Turn the unit on /off POWER SOURCE SOURCE Press this button to toggle between TV/Video and PC display VOLUME VOLUME CHANNEL Press the LEFT button to decrease and RIGHT button to increase the volume level CHANNEL Press the LEFT button to go down and RIGHT button to go up to the next TV channel l
Résumé du contenu de la page N° 6
User’s Manual Connection Ports The port connectors allow connection of your TV antenna, PC, VGA monitor or LCD projector, speakers, video, or s-video source etc. Left & Right Audio2 In Audio In from PC’s sound card Power TV Adapter Antenna Speaker Connection VGA Out to monitor VGA In from PC Video2 In S-Video AVerMedia AVerTV Box3 Back Panel Left & Right Audio1 In Video1 In Video Out Audio Out AVerMedia AVerTV Box3 Front Panel The Installation and Setup section provides more
Résumé du contenu de la page N° 7
User’s Manual MAC 4 PC AU DIO IN L R SPEAKER AUDIO2 IN S-VIDEO IN DC IN VGA IN VIDEO2 IN G O T V A U ANT Installation and Setup The figure below shows the proper cable connections for installing AVerMedia® AVerTV Box3. Macintosh OUT Computer Adapter VGA Cable Audio Cable (optional) (supplied) (supplied) IBM Compatible PC Sound Card Wall Outlet TV Antenna (75Ω) Power Adapter OUT Example: VCR S-Video Cable (not supplied) External Monitor Adapter Amplified Speaker Mac Monitor (option
Résumé du contenu de la page N° 8
User’s Manual Connecting the VGA monitor or LCD Projector Connect the monitor cable to the AVerTV Box3 VGA OUT port. VGA Monitor Mac Monitor Monitor Adapter (optional) VGA Cable (not supplied) LCD PROJECTOR Connecting the Computer You can use AVerTV Box3 with or without turning the computer on. To switch to PC anytime, connect the supplied VGA cable to the AVerTV Box3 VGA IN port and to your computer's VGA card (the terminal where your monitor connects to the PC). VGA IN Cable IBM
Résumé du contenu de la page N° 9
User’s Manual Connecting the Antenna Attach the antenna or cable TV to the ANT port of the AVerTV Box3. TV Antenna (75Ω) Connecting an Audio Cable Plug one end of the supplied audio cable to your sound card LINE OUT (SPEAKER) port and the OUT other end to the PC AUDIO IN port of Audio Cable Sound Card (supplied) the AVerTV Box3. This connection allows you to have audio at all times and to adjust the volume from the AVerTV Box3. Connecting the External Amplified Speaker
Résumé du contenu de la page N° 10
User’s Manual Connecting a Video Source Composite Video: Connect the video OUT Example: Video & Audio Cable (not supplied) cable (not supplied) to the video out of VCR the video device and to the AVerTV Camcorder Box3 VIDEO1 IN or VIDEO2 IN port. Connect the audio cable to the left & Video Game right audio out of the video (e.g. Nintendo®) device and to the AVerTV Box3 left & right AUDIO1 IN or AUDIO2 IN ports. S-Video: Connect the s-video cable (not supplied) to the s-video o
Résumé du contenu de la page N° 11
User’s Manual Using the AVerMedia AVerTV Box3 ® Using AVerMedia AVerTV Box3 for the First Time ® When you power on the AVerMedia AVerTV Box3 for the first time, it will automatically proceed to the SET AREA. Since TV signals vary in different countries, you need to select the appropriate signal. Refer to the table below for country signals. NTSC-J NTSC-M SECAM-DK SECAM-L PAL-I PAL-BG PAL-DK JAPAN USA-STD RUSSIA FRANCE UK AUSTRALIA POLAND-1 USA-HRC HK BANGLADESH POLAND-2 USA-IRC
Résumé du contenu de la page N° 12
User’s Manual AV/PC PC BGM Allows you to continue listening to To toggle between the TV or external video sound while TV/Video or PC display you work on your PC. POWER SOURCE Turn the AVerTV Switch between TV or BOX on/off external video sources MTS (for USA & Japan) NUMBER BUTTONS If the channel offers multi-language To select a TV channel feature, press this button to toggle between languages. 100 Press this button first for SLEEP cable channels over 100 To automatically turn off A
Résumé du contenu de la page N° 13
User’s Manual Main Menu On Screen Display Usage TV SOURCE Use the CH+ or CH- buttons to select between air or cable TV source, then press Vol+ button to make the selection. CH FINETUNE If the TV reception is not clear, choose CH FINETUNE then press Vol+ and Vol- buttons until the TV picture becomes clear. CH SCAN Use the CH+ or CH- buttons to select between CHANNEL SCAN or All FREQ SCAN, then press Vol+ button to make the selection. If you want to interrupt or cancel the s
Résumé du contenu de la page N° 14
User’s Manual Main Menu On Screen Display Usage CLOCK Use this function to set the clock time and to program the AVerTV Box3 to turn on automatically. The clock and alarm format settings are in “hours : minutes”. Simply use the number buttons on the remote to key in the actual time and the time to automatically turn on the AVerTV Box3. If you want to clear or change the time, press Vol-. Under CLOCK menu, select number three (3). Press Vol+ button to select ALARM ON to a
Résumé du contenu de la page N° 15
User’s Manual Main Menu On Screen Display Usage FAVORITE CH This function allows you to add, remove and reprogram or reassign the TV channels with the channel numbers that are easier to remember. In the selected USER CH, enter in the new channel number you want to assign or the channel number you want to remove/add in to the channel line up. In the CATV, enter in the channel number you want to remap or the channel number you want to remove/add. Use the CH+ or CH- buttons to s
Résumé du contenu de la page N° 16
User’s Manual Main Menu On Screen Display Usage OSD Use the CH+, CH-, Vol+, and POSITION Vol- buttons to move the frame on where you want to set the position of the MENU, then press MENU. RESOLUTION Use the CH+ or CH- buttons to choose from 640 x 480, 800 x 600 or 1024 x 768 display resolution then press Vol+. LANGUAGE Use the CH+ or CH- buttons to select from different languages 中文 then press Vol+. 영어 The available languages for NTSC version are English, 中文 and 영어.
Résumé du contenu de la page N° 17
User’s Manual Using Teletext (option) For European countries, the AVerTV Box3 provides the Teletext function which allows users to receive digital information from TV stations that broadcast such information. Teletext data is widely used in Europe and is transmitted along with normal television programs. The AVerTV Box3 can decode the teletext data and display the resulting information on your computer screen. TV stations transmit teletext data in pages. Each page takes only a few seconds
Résumé du contenu de la page N° 18
User’s Manual Selecting a Teletext Page There are many ways of selecting a teletext page : • To enter a teletext page number, press on the NUMBER buttons 0 ~ 9. • To view the next upper or lower teletext page, press the CH+ and CH- buttons on the remote. • To return to the index page (i.e., page 100), press the 100 button. • To go directly to the next upper or lower 100th page, press the Vol+ or Vol- buttons. For example : If you are currently on teletext page 350, you can quickly ju
Résumé du contenu de la page N° 19
User’s Manual LIMITED WARRANTY AVerMedia TECHNOLOGIES, Inc. warrants this product to be free of defects resulting from faulty manufacture or components under the following terms: WARRANTY LENGTH Labor is warranted for (1) one year from the date of purchase. Parts are warranted for (1) one year from the date of purchase. Replacement products will be warranted for the remainder of the one year warranty period or (30) thirty days, whichever is longer. WHO IS PROTECTED This warranty is enf
