Résumé du contenu de la page N° 1
Remote Control
Remote Control
User Guide
User Guide
Résumé du contenu de la page N° 2
Accessing the System Wizard Press MENU, select Settings and then System Wizard. OR Refer to page 12 for information on System Wizard C-1
Résumé du contenu de la page N° 3
Quick Setup 1 Verify the Key Note: If you will be using the green TV1 key that comes already installed in your remote, skip this step and proceed with the next step (Insert the Batteries). 1 2 Confirm Pull the your remote remote has battery the green cover off. number 1 key installed. 3 4 Separate the Insert the key from the key face up remote by and slide inserting your into place. thumbnail or a coin in the crease. Remove the key by grasping at the bottom. 2 Insert the Batteries 1
Résumé du contenu de la page N° 4
2 3 Turn your ViP922 receiver and TV on, and select SYSTEM INFO on the 4 receiver front panel. 5 Quick Setup 3 Making the Remote Work With Your Receiver 1 Verify this key is installed, and continue with step 2. Verify the remote antenna is installed on the back of the receiver. Confirm that you see the System Press and release SAT on Information screen. your remote. After a few seconds, you will hear a tone, and the remote will be listed on the screen. 6 Confirm that your remote operate
Résumé du contenu de la page N° 5
Quick Setup 4 Set Up the Remote to Control Your TV To set up the remote control to operate a TV, you can select a Device Code (see instructions on page 3). Your ViP922 DVR has a large database of Device Codes for other equipment. 1 2 Turn your TV on. Press MENU, select Settings and then Remote Control. 3 Select TV Code and then follow the on-screen instructions to enter your TV’s device code. 4 Press the POWER button to turn the TV on and try other buttons to make sure the code works. If
Résumé du contenu de la page N° 6
Quick Setup/Operation Placing Your Remote in Limited Mode Limited Mode locks out all the TV mode operations except for TV power, Mute, and Volume. This prevents you from accidentally tuning away from satellite programming. 1 Press MENU, select Settings and then Remote Control. 2 Select the Limited Mode option. 3 Use the arrow button to highlight Enabled and then select it. Highlight and select Save. To take the remote out of Limited Mode, highlight Disabled instead of Enabled in step 3. C-5
Résumé du contenu de la page N° 7
Operation Remote Operation SAT Mode To use the features described in this section, make SAT sure you are in SAT mode by pressing the SAT Mode button. Note: Some features may not be available depending on your receiver model. Volume & Mute Buttons Control TV volume Programming required (see C-4) Press this Receiver Power & TV Power button for Top button turns the receiver on/off, SAT Mode Bottom button turns the TV on/off Input Programming required (see C-4) Press once for Input Page Buttons Page
Résumé du contenu de la page N° 8
Operation Remote Operation TV Mode To use the features described in this section, make sure you are in TV mode by pressing the TV Mode button. TV TV Remote programming is required. See C-4 for instructions. Note: If you have programmed the remote in Limited Mode (C-5), only the TV Power, Mute and Volume buttons will control your TV. Press this button for TV Mode Receiver Power Input & TV Power Switch between Turn the TV on/off TV inputs Volume TV Menu Control TV Access menu volume features avail
Résumé du contenu de la page N° 9
Operation Remote Operation DVD Mode DVD To use the features described in this section, make sure you are in DVD mode by pressing the DVD Mode button. You can use this mode to operate your VCR instead of a disc player. Remote programming is required. See page 2 for instructions. Press this button for DVD/VCR Power DVD Mode & TV Power Top button turns the DVD player/VCR power on and off, Bottom button turns the TV on and off Input Switch VCR between its TV & VCR mode Up/Down Arrow Buttons Channel
Résumé du contenu de la page N° 10
Résumé du contenu de la page N° 11
Table of Contents Quick Setup Verifying the Key................................................................... C-2 Inserting the Batteries........................................................... C-2 Linking Your Remote Control................................................ C-3 Operation Setting Up the Remote to Control Your TV........................... C-4 Placing Your Remote in Limited Mode.................................. C-5 Remote Operation in SAT/TV/DVD Modes................... C-
Résumé du contenu de la page N° 12
Résumé du contenu de la page N° 13
REMOTE CONTROL OVERVIEW Use this full-function remote control to operate the DISH Network ViP® 922 SlingLoaded™ DVR receiver. Also, you can program this remote control to operate most popular brands of audio/video equipment like a TV, a DVD/BD player (or VCR), or an audio receiver/ amplifier. See Setting Up the Remote to Work With Your Equipment on page 3. Note: This remote control may support features not used by your receiver. Also, new features may be added by future software updates. U
Résumé du contenu de la page N° 14
If you program the remote control to operate other equipment, refer to page C-6 and the following for remote-control operation instructions: • POWER, INPUT, MUTE, and VOLUME remote buttons are used to control your TV when it is programmed in TV mode. • The same buttons your DVR uses when in SAT mode are used to control a DVD/BD player (or VCR) when this equipment is programmed in DVD mode (or alternatively, in AUX mode). • SELECT, MUTE, VOLUME, and POWER remote buttons may be used to contr
Résumé du contenu de la page N° 15
(or TV/VCR), follow the instructions to program the remote to operate the TV using its code, and then repeat those instructions for the DVD/ BD player or VCR in AUX mode using its code. Press the TV mode button to use the combination device’s TV functions, or the AUX mode button to use DVD/BD (or VCR) functions. SETTING UP THE REMOTE TO WORK WITH YOUR EQUIPMENT You can set up the remote control to operate other equipment using the following steps and the modes as shown on page 1. Instruc
Résumé du contenu de la page N° 16
Instructions Additional Information 5 Scroll the Sort By: (or If the brand is not listed, see Aux Device:) list to Entering Equipment Codes on position the option you page 5. If there is no equipment wish to select within the code for your device right now, blue highlight bar. Then you can check to see if one has highlight your device’s been added after your receiver’s name in the Brand: list next scheduled software update. and select Next. 6 The next screen displays There may only be t
Résumé du contenu de la page N° 17
Instructions Additional Information 10 If the code worked for Choose the code that provides other buttons, select Yes the remote with support for the and continue with step 11. most device functions. If you If the code did not work, wish to verify the support of select No and repeat steps volume and mute functions, go 6 through 9 for the next to step 13. code for your brand. 11 On the Home screen, You can program the remote to confirm that the device’s control your TV in TV mode brand
Résumé du contenu de la page N° 18
Instructions Additional Information 2 Turn on your ViP922 DVR Press MENU, select the and access Remote Control Settings tile. Then from the settings using a linked Settings screen, select Remote remote. Control. 3 Select the TV Code, DVD Select TV Code in order to Code, or AUX Code program the remote to control option on the Remote your TV when in TV mode. Control settings screen. Select AUX Code to program the remote to control an auxiliary device, such as an audio amplifier or DVD pl
Résumé du contenu de la page N° 19
Instructions Additional Information 8 Press and release the mode If you are setting up a TV, you button for the device you are can remain in SAT mode and setting up (TV, DVD, or press the TV POWER button in AUX). step 9. 9 Press the POWER button. If the device code you entered If your equipment does not works, then your equipment turn off, then press and should turn off. Continue with release the SAT button to step 10. switch modes, and try entering the code again. 10 While still in the
Résumé du contenu de la page N° 20
SWITCHING BETWEEN TV AND AMPLIFIER VOLUME CONTROL If a remote control used with the ViP922 DVR has been set up to operate a TV, then MUTE and VOLUME +/- buttons adjust the TV’s volume. To use the remote to adjust the volume of your remote- controllable audio equipment instead of adjusting your TV’s volume, use the steps in the left column of the following table. To switch back to controlling the TV’s volume, use the steps in the right column. Control Audio Amplifier Volume Control TV Volume
